|

How To Fix Graphics Error Code 43 In Windows 11 (2026)

Error Code 43 on a graphics card means the driver told Windows that the device is not working properly.

Device Manager shows it as a yellow exclamation mark, and the message reads “Windows has stopped this device because it has reported problems. (Code 43).”

Microsoft gives three fixes that all start in Device Manager, and they are laid out below in the order to try them.

Quick answer

TryFixBest when
1Update the driverYou have not updated it in a while
2Roll back the driverThe error began after a driver update
3Uninstall, then scan for hardware changesThe first two did not help

What Code 43 means

Microsoft says the error appears when a graphics device driver reports to Windows that the device is not working properly.

The cause may be a hardware problem or a failing driver or driver software.

In Microsoft’s list of Device Manager error codes, Code 43 is put down to a driver reporting a failure to the operating system.

See the error in Device Manager

  1. Right-click the Start button and select Device Manager.
  2. Expand Display adapters and look for the device with a yellow exclamation mark.
  3. Right-click it and select Properties.
  4. On the General tab, read the Device status box for the code and message.

Microsoft’s Code 43 page is written for Windows 10, and the Device Manager menus it uses are the same ones you open on Windows 11.

Fix 1: Update the driver

  1. In Device Manager, right-click the graphics device and select Properties.
  2. Open the Driver tab and select Update Driver.
  3. Select Search automatically for updated driver software.
  4. If Windows finds an update, it installs automatically, so select Close when it finishes.

If Windows finds no new driver, Microsoft says to check the device maker’s website and follow its installation instructions.

The full Device Manager routine, including installing a downloaded driver by hand, is in our guide to updating a driver in Device Manager.

Fix 2: Roll back the driver

Use this if you recently installed an update to the driver or its software.

  1. In Device Manager, right-click the graphics device and select Properties.
  2. Open the Driver tab and select Roll Back Driver.

Microsoft adds that in rare cases a specific driver causes problems, and a rollback can keep it from reinstalling automatically during future Windows updates.

For NVIDIA cards, our guide to rolling back or clean-installing an NVIDIA driver covers the maker’s own tools.

Fix 3: Uninstall and reinstall the driver

Microsoft says uninstalling and reinstalling the driver fixes the error in some cases.

  1. In Device Manager, right-click the graphics device and select Uninstall, then OK.
  2. When the driver has uninstalled, right-click the name of your PC at the top of the device list.
  3. Select Scan for hardware changes, which reinstalls the driver.
  4. Right-click the device again and select Properties.
  5. On the General tab, check that Device status says “This device is working properly.”

Microsoft says that if it does not, you should see the device documentation or contact the manufacturer.

If the screen turns generic after the uninstall

Microsoft says Windows uses the generic Microsoft Basic Display Adapter when a driver made for your graphics hardware is not installed.

Our guide to the Microsoft Basic Display Adapter explains how to get the maker’s driver in place.

If the screen glitches or goes black afterward, read our guide to resetting the graphics driver.

Other Device Manager codes Microsoft lists

The same Device status box can show other codes, and Microsoft’s error-code page gives a fix for each.

CodeMicrosoft’s messageFix
10This device cannot start.Update the driver
22This device is disabled.Action > Enable Device
28The drivers for this device are not installed.Uninstall, then scan for hardware changes
31Windows cannot load the drivers required for this device.Update the driver
39Windows cannot load the device driver for this hardware.Uninstall, then scan for hardware changes
41Driver loaded but the hardware cannot be found.Uninstall, then scan for hardware changes
45This hardware device is not connected to the computer.Reconnect the device

If Code 43 stays

Microsoft says a hardware problem can also cause the error.

For Code 43 its error-code page says to check the hardware documentation or contact the manufacturer to diagnose the problem.

Take the PC maker’s or graphics card maker’s support route if all three fixes leave the exclamation mark in place.

Sources

Microsoft Support: Fix graphics device problems with error code 43 and Error codes in Device Manager in Windows.

Leave a Reply

Your email address will not be published. Required fields are marked *