|

Fix Device Manager Code 10 This Device Cannot Start (2026)

Code 10 in Device Manager means Windows tried to start a device and could not.

The usual message reads “This device cannot start. Try upgrading the device drivers for this device.”

This guide follows Microsoft’s Device Manager error codes page and its driver documentation.

Quick answer

StepWhat to do
1Search Start for device manager and open it
2Open the device category, right-click the device and select Properties
3Confirm Code 10 in the Device status box on the General tab
4Open the Driver tab and select Update Driver
5If Windows has no driver, download the latest one from the hardware maker’s website

What Code 10 means

Microsoft’s driver documentation names this problem CM_PROB_FAILED_START.

It says the code is set when a driver in the device’s driver stack fails the request to start the device.

Microsoft notes that a device with many stacked drivers makes it hard to tell which one failed.

Because of that, the message is generic, and the fix is to get a working driver for the device.

Why the message can read differently

Microsoft says the device’s hardware key may hold a FailReasonString value that contains a message written by the maker.

When that value is missing, Windows shows the generic message about upgrading the device drivers.

SituationWhat Device Manager shows
The device has a FailReasonString valueThe text supplied by the driver or maker, with Code 10
No FailReasonString valueThis device cannot start. Try upgrading the device drivers for this device. (Code 10)

If the text on your PC is different from the generic one but still ends in Code 10, the same steps apply.

Step 1: confirm the code in Device Manager

Microsoft gives these steps for finding the code.

  1. Select Start and search for device manager, then open it from the results.
  2. Double-click the category that holds the problem device.
  3. Right-click the device and select Properties.
  4. Look in the Device status area on the General tab for the error code.

Microsoft says the page does not cover every code, so contact the hardware vendor or Microsoft Support for codes it does not list.

Step 2: update the driver

Microsoft’s fix for Code 10 is to update the driver.

  1. In the device’s Properties box, open the Driver tab.
  2. Select Update Driver to start the Hardware Update Wizard.
  3. Follow the prompts.

Our guide to updating a driver in Windows 11 walks through the same tool with more detail.

If the wizard asks for a driver path

Microsoft says Windows may already have the driver built in, or it may still hold files from the device’s last setup.

If you do not have the driver, download the latest version from the hardware vendor’s website.

Search for the device model on the maker’s support site and choose the driver that matches your version of Windows.

Microsoft’s driver page says that if updating does not help, the failure code stored in the device’s DEVPKEY_Device_ProblemStatus property gives more detail, but that route is meant for driver developers.

If the code is not 10

Microsoft’s error code page lists a one-line fix for each code.

CodeMicrosoft’s descriptionFix on the page
1No drivers or misconfigured driversUpdate the driver on the Driver tab
3Corrupted driver or low memoryClose apps, reinstall the driver, or add RAM
18Drivers need reinstallingUpdate the driver, or uninstall it and scan for hardware changes
28Drivers not installedSee our Code 28 guide
31Windows cannot load the driversUpdate the driver with the Hardware Update Wizard
37Driver initialization failedUninstall the device, then scan for hardware changes
39Driver corrupted or missingUninstall the device, then scan for hardware changes
43Driver reported a device failureSee our Code 43 guide
48Driver blocked for known problemsGet the updated driver from the maker
52Driver signature cannot be verifiedSee our Code 52 guide

Our guide to Code 10 on a USB audio device after a Windows update covers that specific case.

Our guide to a CD or DVD drive that Windows cannot detect covers codes that affect optical drives.

After you update

Open the device’s Properties again and check the Device status box.

If the code no longer appears there, the error has cleared.

If Code 10 stays, check Windows Update and the maker’s website for a newer driver.

Our guide to checking for updates in Windows 11 shows where to look.

When to contact the maker

Microsoft says to contact the hardware vendor when its page does not list your code or fix.

If the maker’s newest driver still gives Code 10, tell them the device model, the Windows version and the exact message shown in Device status.

Sources

Microsoft Support: Error codes in Device Manager in Windows. Microsoft Learn: Code 10 – CM_PROB_FAILED_START.

Leave a Reply

Your email address will not be published. Required fields are marked *