How To Use Cloud Rebuild To Reinstall Windows 11 (2026)
Cloud rebuild is a Windows 11 recovery option that reinstalls Windows from a fresh copy downloaded through Windows Update.
It removes everything on the PC, so it is meant for a PC that Reset this PC could not fix or one you are about to hand over.
This guide follows Microsoft’s own support pages for cloud rebuild and recovery options in Windows.
Quick answer: how to start cloud rebuild
| Situation | Where to go |
|---|---|
| Windows starts | Settings > System > Recovery > Rebuild PC |
| Windows will not start | Windows RE > Troubleshoot > Cloud rebuild |
| What it removes | Personal files, accounts, apps and settings on the PC |
| What it keeps | Files saved in OneDrive or other cloud services |
| What you need | Internet, power plugged in, and the October 2026 Windows update or later |
What cloud rebuild does
Cloud rebuild reinstalls Windows using a fresh copy of Windows and drivers from Windows Update.
It does not rely on the Windows files already stored on your PC.
Microsoft says you can use it when other recovery options fail, or to erase your data before you recycle, return or give away the PC.
It works only on Windows 11, and Microsoft’s page does not mention Windows 10.
Check these before you start
- Update level: you need the October 2026 Windows non-security update or later for your version of Windows 11, from Windows Update or the Microsoft Update Catalog as KB5127936.
- Internet: the PC downloads Windows and drivers, so use Ethernet or Wi-Fi.
- Power: keep the PC plugged in for the whole process.
- Backups: copy your files somewhere safe first, because everything on the PC is removed.
- Windows 11 requirements: the PC must meet them, and the most common blocker is a turned-off TPM.
If the TPM is off, the guide to checking and turning on TPM shows how to switch it on in firmware.
Microsoft says the TPM may be labeled PTT, fTPM or Security Device in UEFI or BIOS settings.
If your drive is encrypted, have your BitLocker recovery key ready, because Microsoft says most Windows RE options ask for it.
Start cloud rebuild from Settings
- Open Settings and select System > Recovery.
- Next to Rebuild this PC, select Rebuild PC.
- Wait while the PC restarts into the Windows Recovery Environment and starts cloud rebuild.
- Connect to a network when asked, and wait while cloud rebuild prepares.
- Choose a removal option, as described below.
For Wi-Fi, you select the network and type its password on the connection screen.
Start cloud rebuild when Windows will not start
- Open the Windows Recovery Environment, which opens by itself if Windows fails to start several times.
- On the Choose an option screen, select Troubleshoot.
- Select Cloud rebuild.
- Connect to a network and choose a removal option.
If the PC keeps looping on the repair screen first, the Automatic Repair loop guide covers the gentler tools to try before a rebuild.
Remove files or remove and sanitize
| Option | Speed | Use it when |
|---|---|---|
| Remove files | Faster | You will keep the PC, although someone with special recovery tools might still recover files |
| Remove & sanitize | Slower | You will recycle, return or give away the PC, because it makes recovery much harder |
With Remove files, you confirm the Windows version, edition and language, read the warning and select Continue.
With Remove & sanitize on a PC with several disks, you choose Windows disk only, where other disks keep their files, or All disks, which is slower.
You then review the summary and select Sanitize and install, and Microsoft warns that sanitizing cannot be undone.
The Sanitizing data step can look idle for a long time, and the PC may restart several times during installation.
Cloud rebuild compared with Reset this PC
| Point | Reset this PC | Cloud rebuild |
|---|---|---|
| Personal files | Can keep them | Always removes them |
| Windows source | Local Windows files | Windows and drivers from Windows Update |
| Data sanitizing | Not offered | Offered |
| Best use | First reinstall attempt | Try it if Reset this PC does not work |
If you only want to refresh Windows and keep your documents, use the Reset this PC keep my files guide instead.
Cloud rebuild error codes
| Code | Meaning | What Microsoft says to do |
|---|---|---|
| 0x8007027F | The PC is not plugged in | Plug it in and try again |
| 0x800704C6 | No internet connection | Connect, then select Cancel > Troubleshoot > Cloud rebuild |
| 0xc1900200 | The PC does not meet Windows 11 requirements, often because TPM is off | Turn on TPM in firmware, then retry |
| 0xc1900224 | A required driver is not available from Windows Update | Contact the manufacturer, use manufacturer recovery media, or reinstall with installation media |
Do not interrupt the process
Do not turn off or restart the PC while cloud rebuild runs, because Windows might not start if it is interrupted.
If that happens, Microsoft says to use a recovery drive, installation media or manufacturer recovery media.
The recovery drive guide and the installation USB guide show how to make either one on another PC.
Microsoft gives no fixed running time, because it depends on your internet speed and your PC.
What sanitizing can and cannot promise
Microsoft says sanitization depends on your PC’s storage hardware, and Windows cannot independently verify what the disk did.
If your company or a legal rule requires proof of erasure, ask your PC manufacturer whether your PC supports sanitization.
If sanitizing fails, you can retry, skip it or copy the logs to a USB drive.
Microsoft advises against skipping it when you plan to recycle, return or give away the PC, and says to use a manufacturer tool to erase the data instead.
After cloud rebuild finishes
- Sign in with your Microsoft account to get your OneDrive files back.
- Copy any other backed-up files back manually.
- If you used Windows Backup, restore your apps and settings during setup.
- Reinstall any apps that were not restored.
- Open Settings > Windows Update and check for updates.
The Windows Backup guide explains what that app saves.