How To Check Your PC’s Bluetooth Version In Windows 11 (2026)
Windows 11 does not show your Bluetooth version on the main Bluetooth settings page.
You find it in Device Manager, where a small number called LMP tells you which Bluetooth version your PC’s radio supports.
The steps below follow Microsoft’s own support page and take about a minute.
Quick answer
| Step | What to do |
|---|---|
| 1 | Right-click Start and open Device Manager |
| 2 | Expand Bluetooth and right-click your Bluetooth radio |
| 3 | Select Properties > Advanced |
| 4 | Read the LMP number next to Firmware Version |
| 5 | Match the number to the table below |
Open Device Manager
- Right-click the Start button.
- Select Device Manager.
- Expand the Bluetooth entry in the list.
Pick the right entry
The Bluetooth list holds several items, and only one is the actual radio.
The radio has a maker’s name in it, such as an Intel or Realtek adapter.
Microsoft says to ignore these three entries, because none of them is the radio.
- Bluetooth Device (RFCOMM Protocol TDI)
- Microsoft Bluetooth Enumerator
- Microsoft Bluetooth LE Enumerator
If the Bluetooth entry is missing altogether, see our guide to Bluetooth missing in Windows 11.
Read the LMP number
- Right-click the Bluetooth radio and select Properties.
- Open the Advanced tab.
- Under Bluetooth Radio Information, find the number after LMP next to Firmware Version.
For example, a firmware version that begins with LMP 12 means your radio supports Bluetooth 5.3.
Match LMP to a Bluetooth version
This is Microsoft’s table of LMP numbers and the Bluetooth core specification each one stands for.
| LMP number | Bluetooth core specification |
|---|---|
| LMP 6 | 4.0 |
| LMP 7 | 4.1 |
| LMP 8 | 4.2 |
| LMP 9 | 5.0 |
| LMP 10 | 5.1 |
| LMP 11 | 5.2 |
| LMP 12 | 5.3 |
| LMP 13 | 5.4 |
| LMP 14 | 6.0 |
Older versions in the table
Microsoft’s table also lists much older numbers.
LMP 0, 1 and 2 stand for Bluetooth 1.0b, 1.1 and 1.2, and Microsoft marks all three as withdrawn.
LMP 3 is 2.0 + EDR, which is also withdrawn.
LMP 4 is 2.1 + EDR and LMP 5 is 3.0 + HS, and Microsoft calls both deprecated and to be withdrawn.
What the number means
Microsoft explains that the LMP number is the highest Bluetooth core specification your device fully supports.
Accessories with a higher specification may still work with your PC, but with reduced functionality.
In Microsoft’s words, such an accessory may work with reduced functionality.
Check if your PC supports LE Audio
Bluetooth LE Audio is a newer audio feature, and Microsoft has a separate check for it.
- Open Settings and select Bluetooth & devices.
- Under Device settings, look for the option to use LE Audio when available.
- Check that it is turned on.
Microsoft says that if the option is missing, your device does not currently support LE Audio.
What LE Audio needs
| Requirement | Detail from Microsoft |
|---|---|
| Windows version | Windows 11 version 22H2 or later |
| Radio | Bluetooth LE support and a compatible audio codec |
| Drivers | LE Audio-compatible drivers from the maker for the radio and the audio codec |
| Headset | Must also support LE Audio, or the TMAP profile |
Microsoft says LE Audio is not supported on Windows 10 or Windows 11 version 21H2.
It also says being sold as Bluetooth LE does not guarantee LE Audio support.
To see which Windows version you have, follow our Windows version guide.
If the LE Audio option is missing
Microsoft says the cause may be hardware limits, or missing or incompatible drivers.
Some devices may gain support later through driver updates from the PC maker.
If your headset sounds poor on calls, our Bluetooth headset call sound guide covers that separate problem.
If there is no Bluetooth entry at all
Microsoft’s first advice is to check your product specifications, because some devices do not have Bluetooth hardware.
If the hardware exists, turn Bluetooth on from the taskbar quick settings, or under Start > Settings > Bluetooth & devices.
Make sure airplane mode is off.
Then run the Bluetooth troubleshooter under Start > Settings > System > Troubleshoot > Other troubleshooters, and select Run next to Bluetooth.
Microsoft says an outdated or incompatible driver is one of the most common causes of Bluetooth problems, so update it as shown above.
Update the Bluetooth driver
Because Microsoft says LE Audio support may arrive through the maker’s driver updates, it is worth updating the Bluetooth driver before you decide your PC lacks a feature.
- Select Start, type Device Manager, and open it.
- Expand Bluetooth.
- Right-click your Bluetooth adapter and select Update driver.
- Choose Search automatically for drivers and follow the prompts.
- Restart your PC when the update finishes.
Microsoft adds that Windows may report the best driver is already installed while a newer one is still available on your PC maker’s website.
Other driver options from Microsoft
| Method | Steps |
|---|---|
| Windows Update | Settings > Windows Update > Check for updates, install what is offered, then restart |
| Reinstall | Device Manager > right-click the adapter > Uninstall device, then restart so Windows reinstalls it |
| Roll back | Adapter Properties > Driver tab > Roll Back Driver, if the button is available |
| Maker’s website | Search your exact model number and install the latest Bluetooth driver for Windows 11 |
Roll back is meant for the case where Bluetooth worked before a recent update.
Microsoft’s driver page is linked under the official sources at the end of this guide.
Related checks
Wi-Fi support is checked in a different place, and our Wi-Fi 6, 6E and 7 guide shows how.
To connect a device once you know your version, see how to pair a Bluetooth device in Windows 11.