How To Change Your Wi-Fi Password On AT&T (2026)

You change an AT&T Wi-Fi name or password in the Smart Home Manager app, on the My Wi-Fi screen.

If you cannot use the app, the gateway has its own settings page at 192.168.1.254 that needs the Device Access Code from its label.

This guide follows AT&T’s support pages for both methods.

Quick answer: pick your method

MethodWhereWhat you need
Smart Home Manager appMy Wi-Fi, then Edit, then SaveYour myAT&T sign-in
Smart Home Manager on a computerMy Wi-Fi card, then Change, then SaveYour myAT&T sign-in
Gateway settings page192.168.1.254Device on your Wi-Fi and the Device Access Code on the label

AT&T says its Smart Home Manager works with AT&T Internet, Internet Air and Small Business Internet on select gateways and All-Fi Hubs.

Change it in the Smart Home Manager phone app

AT&T’s iPhone and Android pages use the same steps, with the Wi-Fi name as the example.

  1. Open the AT&T Smart Home Manager app and sign in with your myAT&T account.
  2. On the main screen, tap My Wi-Fi.
  3. Tap Edit next to the setting you want to change.
  4. Tap the name box and type the new Wi-Fi name, or choose the password option and type a new password.
  5. Tap Save.

AT&T says the password follows the same steps as the name.

The same screen also lets you adjust other network settings, such as security.

Change it from a computer

AT&T’s Wi-Fi page says to use Smart Home Manager from a computer, which loads in your browser after you sign in to myAT&T.

  1. Sign in to Smart Home Manager.
  2. Scroll to the My Wi-Fi card.
  3. Choose Change next to the name or password you want to update.
  4. Select X to clear the existing entry, then type the new one.
  5. Select Save.
  6. Reconnect your devices using the updated network information.

Gateways Smart Home Manager does not support

AT&T lists older gateways where this method does not work.

Unsupported gateway
2Wire 2701
2Wire i38
Netgear 7550
Westell 327
Pace 4111

If you have one of these, or cannot reach Smart Home Manager, use the gateway settings page below.

Change it on the gateway settings page

  1. Connect a phone or computer to your Wi-Fi network.
  2. Open a browser and go to 192.168.1.254.
  3. Enter the Device Access Code printed on the label of your gateway or hub.
  4. Update the Wi-Fi name or password.

AT&T’s page does not name the exact menus on this screen, so look for the Wi-Fi settings.

On an All-Fi Hub (BGW530), AT&T’s page puts the advanced options under Home Network, then Wi-Fi, then Advanced Options.

Find the current name and password first

For the BGW530 hub, AT&T says your current name and password are on the sticker on the hub.

You can also scan the QR code on the hub with a mobile device, or open the My Wi-Fi card in Smart Home Manager.

On a phone you have already joined to the network, our guide to seeing a saved Wi-Fi password on a Samsung phone shows another way to read it.

Set a stronger password on a BGW530 hub

AT&T says security is on by default with WPA-2 on the BGW530, and gives a path to restore it if it was turned off.

  1. Open the hub settings at 192.168.1.254 and enter the Device Access Code.
  2. Go to Home Network, then Wi-Fi, then Advanced Options.
  3. For both 2.4 GHz and 5 GHz, set Security to the default password or a custom WPA password.
  4. Set WPA Version to WPA-2.
  5. Enter a new password of 10 characters or more, and save.

AT&T adds that longer, more complex passwords are more secure.

Separate names for 2.4 GHz and 5 GHz

AT&T says the 2.4 GHz and 5 GHz radios can have different names and passwords, and it recommends matching them for the best experience.

OptionWhat AT&T says
Same name on both bandsRecommended for the best experience
Different names or passwordsAllowed on the BGW530 hub
Hide Network NameYou must type the name and password manually on every device

Save your Wi-Fi name and password before you hide the name, because you will need them for every device.

Reconnect your devices

AT&T’s only stated result of a change is that you reconnect your devices with the updated network information.

Join the new name on each phone, laptop and TV, and run through any smart devices that stayed on the old password.

If the gateway itself is the problem, see our guide to restarting or resetting your AT&T Wi-Fi gateway.

Smart Home Manager also lists the devices on your network, and our guide to scanning for devices on your Wi-Fi network shows another way to check.

See which devices are on your network

After a password change, Smart Home Manager is the quickest place to check who has rejoined.

WherePath
ComputerSign in, choose Network, then Connected Devices, then select a device
Phone appTap Profiles & devices, choose the middle icon, then select a device

AT&T says only devices connected to your network show, and a device it cannot identify appears as Other or Unknown.

Share the new password with guests

  1. Open the Smart Home Manager app.
  2. Select My Wi-Fi.
  3. Choose Share Wi-Fi for the network you want to share.
  4. Pick a contact or message option to send the details.

AT&T says guests can also scan your Wi-Fi QR code with their phone camera, and that you can text the details only from the app on a smartphone.

Other things Smart Home Manager can do

  • Test Wi-Fi speeds and check for weak signals, which AT&T says is available on the mobile app only.
  • Restart your gateway to refresh connections.
  • Set internet access controls such as profiles and time limits.

Sources

AT&T support: Change Your Wi-Fi Network Information.

AT&T support: Editing your Wi-Fi’s name or password in Smart Home Manager.

AT&T support: All-Fi Hub (BGW530) support.

AT&T support: Manage Wi-Fi Devices with Smart Home Manager.

AT&T support: Explore Smart Home Manager.

Leave a Reply

Your email address will not be published. Required fields are marked *