How To Restart Or Reset Your AT&T Wi-Fi Gateway (2026)

When AT&T Internet drops out or Wi-Fi stops reaching your devices, restarting the gateway fixes many common problems.

AT&T publishes separate steps for a simple restart and for a full factory reset, and the two have very different consequences.

This guide covers both, plus what the All-Fi Hub lights and error codes mean.

Quick answer: restart first, reset last

ActionWhat it doesTime to wait
Restart (unplug power)Reboots the device and keeps your settings.Up to 10 minutes for the device to restart
Restart in the Smart Home Manager appReboots Wi-Fi without unplugging anything.Up to five minutes for devices to reconnect
Reset (hold the red Reset button 15 seconds)Returns the device to factory settings and erases custom settings.Up to 10 minutes to come back online

Restart by unplugging the power cord

AT&T says this applies to your All-Fi Hub, Wi-Fi gateway or modem.

  1. Unplug the power cord from the back of the device, and remove the internal battery if it has one.
  2. If you have DSL service, also unplug the telephone cord.
  3. Wait 20 seconds.
  4. Reinstall the internal battery if you removed one.
  5. Plug the power cord back in, and reconnect the telephone cord if you have DSL.
  6. Wait up to 10 minutes for the device to restart.

A restart disconnects every device, and it can take up to five minutes for your devices to reconnect.

Restart from the Smart Home Manager app

If you would rather not touch the hardware, AT&T offers a restart inside the app.

  1. Open the Smart Home Manager app.
  2. Tap Network (the Wi-Fi icon).
  3. Scroll down and select Restart Wi-Fi.
  4. Confirm by selecting Restart again.

Factory reset with the red Reset button

AT&T warns that a reset erases custom settings, including Wi-Fi network names, passwords and any static IP address, so write these down first.

  1. Find the red Reset button, usually on the back of the device.
  2. Hold it for at least 15 seconds, because releasing it sooner only restarts the device without resetting it.
  3. Wait up to 10 minutes for the device to come back online.
  4. Select Restart again in the app.
  5. If you had a custom Wi-Fi name or password, update your Wi-Fi settings so your devices can reconnect.

If your phone or U-verse TV also acts up

AT&T lists different steps for each service, and restarting the gateway interrupts all of them, including phone and TV.

ServiceStepNotes
Internet (All-Fi Hub or Wi-Fi Gateway)Unplug the power cord from the equipment and the wall for 20 seconds, then plug it back in.Interrupts all services, including phone and TV.
Phone (AT&T Phone – Advanced)Press and release the red RESET button on the back of the AP-A device.Applies to the AP-A device only.
U-verse TVRestart the gateway first, then hold POWER on the TV receiver for 10 seconds and press it again.AT&T says this takes 5 to 8 minutes and affects any DVR recordings in progress.

What the All-Fi Hub lights mean

AT&T’s All-Fi Hub quick-reference pages for the BGW530 and BGW830 describe the same front lights: one power light and four signal lights.

LightStatusMeaning
PowerGreen, solidThe hub has power.
PowerRed, solidThe hub has an error, so check the signal lights for the code.
SignalGreen, solidThe number of lit bars shows signal strength, and one or two bars means you should look for a better location.
SignalAmber, chasingThe hub is searching for the best signal tower.
SignalAmber, blinkingThe hub has an error, so count the blinks for the code.
SignalAll off, power light redNo connection to the 5G cellular network (E405).

AT&T All-Fi Hub error codes

When the signal lights blink amber, the number of blinks gives the code.

BlinksCodeMeaning
1E004No IP address
2E400SIM error
3E403Authentication failure
4E013DNS down

The page points to AT&T’s Error code FAQ for fixes.

Check the Wi-Fi button and light

A green Wi-Fi light means Wi-Fi is on.

If the light is off, the 2.4GHz, 5GHz and guest networks are all off, although wired devices stay connected.

Pressing the Wi-Fi button turns Wi-Fi on or off, and turning it off disconnects every wireless device.

Find your Wi-Fi name and password

You need these after a reset, so know where to look.

MethodWhere to look
StickerOn the All-Fi Hub itself
QR codeScan with a mobile device to connect automatically
AT&T appHome internet service, then Wi-Fi details

AT&T says the 2.4GHz and 5GHz radios can have different names and passwords, but using the same name and password on both gives the best experience.

Check where the gateway sits

AT&T’s Wi-Fi networking guide says to place the gateway or All-Fi Hub in a central spot, standing upright on an elevated surface such as a desk or shelf.

Keep the front unobstructed and facing the area where most of your devices are used.

Keep it away from heat sources, moisture, excessive dust, extreme cold and large metal objects.

AT&T also says to keep the gateway or hub at least 10 feet from cordless phones, Bluetooth devices and microwave ovens.

ProblemAT&T’s suggestion
Slow or unstable Wi-Fi on stationary devicesUse Ethernet for PCs, game consoles, printers and smart TVs, since wired connections are fastest and free up Wi-Fi bandwidth.
Network feels crowdedTen or more connected devices can overcrowd the network, so turn off devices you are not using.
Older laptops or PCs struggleCards that only support 802.11b or g are slower, so AT&T suggests an 802.11ac network card or USB adapter.
Devices behave oddlyInstall the latest updates for your Wi-Fi devices and network adapter drivers.

AT&T adds that if every device supports 802.11n you can set the radio to n only, but if some devices stop connecting after the change, revert to mixed mode.

Check for an outage before you reset anything

AT&T’s troubleshooting page links to an outage checker, and for Internet Air customers it points to wireless outages.

Its other listed tools include a speed test, a connection-optimizing guide and a Wi-Fi password finder.

When to contact AT&T

If a restart does not help, AT&T’s page offers live chat at att.com/chat and the main support site at att.com/support.

The page does not list a phone number, so chat or the Search or chat option on the support page is the official route.

For routers from other brands, see our guides on a TP-Link router with no internet and a Netgear router with no internet.

If one streaming device is the only one failing, try our Roku Wi-Fi guide.

Sources: Restart or Reset Your AT&T All-Fi Hub or Wi-Fi Gateway, Troubleshoot Your AT&T Internet, Troubleshoot Your AT&T Service, Maximize Wi-Fi Home Networking, and Learn About Your All-Fi Hub (BGW830).

Leave a Reply

Your email address will not be published. Required fields are marked *