|

How To Fix Bluetooth Sound On One Side In Windows 11 (2026)

Bluetooth headphones, earbuds or speakers sometimes play through the left or the right side only after they connect to a Windows 11 PC.

Microsoft has a support page for exactly this problem, and it puts the cause in one of three places: a Windows setting, the pairing, or the audio device itself.

The steps below follow Microsoft’s order, starting with the checks that take a few seconds.

Quick answer: what to check first

CheckWhere it isWhat it should be
BalanceStart > Settings > System > Sound, select the Bluetooth device, then Output settings > VolumeLeft and Right at the same level
Mono audioStart > Settings > System > Sound, in the Output sectionOff
FormatSame device page, Output settings > Format2 channels, 16bit, 48000Hz (DVD Quality)
PairingStart > Settings > Bluetooth & devices > DevicesDevice removed, then added again with both earbuds in the case

Why only one side plays

Microsoft says this often happens with Bluetooth LE Audio earbuds or speakers when only one side connects during pairing.

It also says a firmware or software update that adds LE Audio support can disrupt a connection that used to work.

A low battery in one earbud or speaker is the other common cause on Microsoft’s list.

Step 1: charge both sides and look for damage

Microsoft’s first check is the battery, because a low battery can switch one speaker off.

  1. Select Start > Settings > Bluetooth & devices.
  2. Find the connected device in the list.
  3. Read the battery percentage below the device name, if the device reports one.
  4. Charge the device, then connect it again.

Not every device reports its battery level to Windows, so use the indicator on the device or its case when no percentage appears.

While it charges, look over the device for wear, loose wires or damage.

Step 2: even out the left and right balance

Each output device in Windows 11 has its own Left and Right levels, and they need to match.

  1. Select Start > Settings > System > Sound.
  2. Under Output, select your Bluetooth audio device.
  3. Open Output settings and select Volume.
  4. Set Left and Right to the same level.

Microsoft gives 100 as the typical level for both.

Step 3: turn off Mono audio

  1. Select Start > Settings > System > Sound.
  2. In the Output section, turn off the Mono audio switch.

Microsoft also describes a system-wide mono audio switch at Settings > Accessibility > Audio, and says stereo may not work correctly while it is on.

Step 4: set a stereo format

  1. Select Start > Settings > System > Sound.
  2. Under Output, select your Bluetooth audio device.
  3. Open Output settings and go to Format.
  4. Choose 2 channels, 16bit, 48000Hz (DVD Quality) from the list.

Play something with clear left and right sound after each change, so you know which step fixed it.

Step 5: remove the device and pair it again

This is the fix for earbuds where only one side joined the PC during pairing.

  1. Select Start > Settings > Bluetooth & devices.
  2. Select Devices.
  3. Scroll to the Audio section and find your earbuds or speakers.
  4. Select Disconnect, then select Remove device.
  5. Put both earbuds in their charging case.
  6. Put the device in pairing mode the way its maker describes.
  7. Select Add device, then select Bluetooth.
  8. Wait for the device to appear in the list, then select it.
  9. When Windows asks, choose the option to connect the second earbud or speaker.

Do not skip the last prompt, because Microsoft ties this fault to earbuds where only one side connected during pairing.

The full pairing walk-through is in our guide to pairing a Bluetooth device in Windows 11.

Step 6: test a second Bluetooth device

Connect a different pair of Bluetooth headphones or a speaker to the same PC.

ResultWhat Microsoft says it means
The second device plays both sidesThe original device may be faulty
Every Bluetooth device plays one sideThe cause is likely the PC’s configuration or a driver

Step 7: update the device’s firmware

  1. Go to the official website of the company that made your headphones, speaker or Bluetooth adapter.
  2. Open its Support, Downloads or Drivers & Firmware section.
  3. Search for your model and install any firmware update, following the maker’s instructions.
  4. Restart both the Bluetooth device and the PC.
  5. Connect the device again.

If every Bluetooth device plays on one side

When step 6 points at the PC, update the Bluetooth driver.

  1. Search for Device Manager from the taskbar and open it.
  2. Expand Bluetooth and right-click the Bluetooth adapter, whose name may include the word radio.
  3. Select Update driver > Search automatically for updated driver software.
  4. Select Close, and restart the PC if Windows asks.

If Windows finds nothing newer, Microsoft’s advice is to download the latest driver from the PC maker’s website.

Microsoft’s Bluetooth troubleshooter in the Get Help app is the other PC-side check, and it runs its diagnostics on its own.

Our Device Manager driver guide covers the manual install for a driver you downloaded.

Check whether your PC supports LE Audio

Because Microsoft ties this problem to LE Audio devices, it helps to know whether your PC uses LE Audio at all.

  1. Select Start > Settings > Bluetooth & devices > Devices.
  2. Look under Device settings for Use LE Audio when available.

If that setting is missing, Microsoft says the PC does not currently support LE Audio.

RequirementWhat Microsoft states
Windows versionWindows 11, version 22H2 or newer
Not supportedWindows 10 and Windows 11, version 21H2
PC hardwareCompatible Bluetooth LE support and a compatible audio codec
PC driversLE Audio-capable drivers from the manufacturer for the Bluetooth LE radio and the audio codec
Headphones or earbudsMust support LE Audio too; check the maker’s specifications for LE Audio or TMAP

A PC sold as supporting Bluetooth LE may still not support LE Audio, according to the same page.

Which fix fits what you see

  • One earbud was silent from the first connection: remove the device and pair it again with both earbuds in the case (step 5).
  • It worked until a firmware or software update: pair it again (step 5), then check for newer firmware (step 7).
  • One side is quieter instead of silent: charge the device and check the balance (steps 1 and 2).
  • Nothing plays on either side: use our no sound on Windows 11 guide instead.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *