|

How To Fix Blue Screen Of Death Errors On Windows 11 (2026)

Your Windows 11 PC shows a blue screen with a stop code, then restarts or gets stuck in a restart loop.

Microsoft says a single unexpected restart usually needs no action, and it is a repeating stop code that calls for troubleshooting.

Start with the simple checks and move toward recovery options only if the crashes continue.

Quick answer: what to try first

SituationTry this
Crashes began after adding hardwareShut down and remove the new hardware
Windows will not start normallyStart in Safe Mode, then continue the steps
A device shows an exclamation pointUpdate, disable or uninstall it in Device Manager
The drive is almost fullFree up space so 10% to 15% stays free
Crashes continueInstall updates, then use a restore option

Do you need to act at all?

If the PC restarts on its own and then runs normally, Microsoft says no action is usually needed.

Troubleshoot only when the same stop code keeps coming back.

Write down the stop code shown on the blue screen, because it helps you search for the cause.

Step 1: remove new hardware

If the errors began after you added hardware, shut the PC down, remove that hardware and restart.

Then see whether the stop code returns without it.

Step 2: start in Safe Mode if Windows will not load

Safe Mode starts Windows with a minimal set of files and drivers so you can isolate the cause.

  1. Open the Windows Recovery Environment.
  2. Select Troubleshoot > Advanced options > Startup Settings.
  3. Select Restart.
  4. On the Startup Settings screen, press 4 or F4 for Safe Mode.

If the device is encrypted, you need your BitLocker recovery key for these steps.

If the problem does not happen in Safe Mode, Microsoft says default settings and basic drivers are unlikely to be the cause.

Startup Settings options that help with crashes

KeyOptionPurpose
F2Enable boot loggingWrites ntbtlog.txt listing the drivers loaded at startup
F3Enable low-resolution videoUses the current video driver at low resolution to fix display settings
F4Enable Safe ModeMinimal files and drivers
F5Safe Mode with NetworkingSafe Mode plus internet and network access
F6Safe Mode with Command PromptOpens a command prompt instead of the normal desktop
F9Disable automatic restart on system failureStops the crash-restart loop so you can read the error

Press Enter on that screen to start Windows normally.

If Windows keeps booting into Safe Mode

A normal restart usually exits Safe Mode.

  1. Press the Windows key + R, type msconfig and select OK.
  2. Open the Boot tab.
  3. Clear the Safe boot checkbox.

How to reach the recovery environment

Windows opens the recovery environment by itself if it fails to start correctly several times.

MethodSteps
From SettingsGo to System > Recovery and select Restart now next to Advanced startup
Shift and RestartHold Shift, select Power, then select Restart
Forced repairWhen the logo appears, hold the power button until the PC shuts off, repeat twice, and on the third start choose Advanced options on the Automatic Repair screen
Recovery mediaBoot from a recovery drive or Windows installation media, then select Repair my PC

Other tools inside the recovery environment

Besides Startup Settings, the recovery environment offers several repair tools.

ToolWhat it does
Startup RepairAutomatically diagnoses and fixes common startup problems
Uninstall UpdatesRemoves recently installed Windows updates
Command PromptOpens a command line for advanced troubleshooting
UEFI Firmware SettingsRestarts into firmware settings, where you can change boot order and Secure Boot
System Image RecoveryRestores the PC from a system image backup

Try Startup Repair and Uninstall Updates before the options that reinstall Windows.

Step 3: check Device Manager for faulty drivers

  1. Right-click Start and select Device Manager.
  2. Look for any device marked with an exclamation point.
  3. Right-click it and choose Update driver.
  4. If that does not help, disable or uninstall the device.

If a driver update caused the trouble, our guide to a stuck or failing Windows 11 update covers the update side.

Step 4: keep enough free disk space

Microsoft recommends keeping roughly 10% to 15% of the drive free.

Windows and some apps need that room for swap files and other functions.

Our guide to freeing up disk space on Windows 11 shows how.

Step 5: install the latest updates

Go to Start > Settings > Windows Update and select Check for updates.

Install what is offered and restart, because Microsoft lists updates as a standard step.

Quick machine recovery

On Windows 11 version 24H2 or later, Quick machine recovery can detect repeated boot failures and look for a fix through Windows Update.

It does not reset the PC or affect your files, apps or settings.

Microsoft says it is on by default in Windows 11 Home, while an IT administrator may need to enable it on Pro and Enterprise.

Step 6: use a recovery option

If nothing else works, Microsoft says to restore Windows from a restore point or another recovery option, starting with the least disruptive.

OptionWhat it doesYour files
Point-in-time restore (24H2 or later)Rolls the whole PC back to a recent automatic restore pointRestored to the earlier state
Uninstall updatesRemoves a recent update that may be the causeNot affected
System RestoreRolls back system files and settingsPersonal files kept
Reset this PCReinstalls WindowsYou choose to keep or remove them
Cloud rebuildReinstalls a fresh copy from Windows UpdateFiles, apps and settings removed

Microsoft says point-in-time restore keeps its restore points for up to 3 days, so use System Restore if you need to go back further.

Resetting or reinstalling typically takes 30 minutes to 2 hours, while lighter options such as uninstalling an update take less time.

Back up your files first, and have your BitLocker recovery key ready if the drive is encrypted.

Rule out malware

Microsoft suggests a virus scan if the problems continue.

  1. Go to Settings > Privacy & security > Windows Security.
  2. Run a scan from there.

If the problem still continues, Microsoft says to reinstall Windows from installation media with the clean installation option, which removes personal files and apps from the selected drive.

If the screen is blank with no stop code

Microsoft treats a black or blank screen without a stop code as a separate problem.

If an external display is the issue, see how to fix a second monitor not detected on Windows 11.

Sources

These steps follow Microsoft’s Troubleshooting Windows unexpected restarts and stop code errors, Windows startup settings, Windows recovery environment and Recovery options in Windows pages.

Leave a Reply

Your email address will not be published. Required fields are marked *