|

How To Fix Windows 11 Update Stuck Or Failing (2026)

Windows 11 sometimes sits on an update for hours, loops through restarts or throws an error code when you click Check for updates.

Microsoft publishes a clear ladder of fixes for this, starting with a built-in troubleshooter and ending with command-line repairs.

Work through the steps below in order, because the early ones take a few minutes and fix most stuck updates.

Quick answer: what to try first

What you seeTry this firstWhere
Update will not start or installRun the Windows Update troubleshooterSettings > System > Troubleshoot > Other troubleshooters
Stuck at 0% or 100%Restart, check the connection and free spaceStart > Power
Stuck between 51% and 99%Check for updates again or rerun the troubleshooterSettings > Windows Update
Same error every timeLook up the code in the table belowThis guide
Nothing helpsRename the update folders from an admin Command PromptCommand Prompt (admin)

Step 1: run the Windows Update troubleshooter

Microsoft tells Windows 11 users to start with an automated troubleshooter before touching anything manual.

  1. Open Start > Settings > System > Troubleshoot > Other troubleshooters.
  2. Next to Windows Update, select Run.
  3. Follow the prompts and let it apply any fix it finds.

You can also run the same tool from the Get Help app.

Step 2: check your connection and power

An update that cannot reach Microsoft or loses power halfway will stall.

  • Plug a laptop into its charger.
  • Open Start > Settings > Network & Internet > Wi-Fi and confirm you are online.
  • Reconnect to Wi-Fi or switch to Ethernet if the status looks wrong.

If the connection itself is flaky, see our guide to fixing Windows 11 internet connection issues.

Step 3: unplug extras and confirm admin rights

Microsoft says external drives, docks and other non-essential devices can get in the way of an install.

Unplug them, then retry the update.

Some updates also need an administrator account, so sign in with one or ask someone who has admin rights on the PC to install them.

Step 4: fix the date and time

A wrong clock can make an update fail, and the fix takes seconds.

  1. Go to Start > Settings > Time & language > Date & time.
  2. Turn on Set time automatically and Set time zone automatically.
  3. If needed, select Sync now under Additional settings.

Step 5: free up disk space

Microsoft lists the minimum free space an update needs.

Windows typeFree space needed
32-bitAt least 16 GB
64-bitAt least 20 GB

On a small drive, Microsoft suggests using a USB drive for temporary space and following its guide to freeing up drive space.

Step 6: clear the Windows Update cache

Damaged downloaded files are a common reason an update keeps failing.

  1. Press Win + R, type services.msc and press Enter.
  2. Right-click Windows Update and select Stop.
  3. Open C:\Windows\SoftwareDistribution and delete everything inside it.
  4. Back in Services, right-click Windows Update and select Start.

Then check for updates again from Settings > Windows Update.

Fixes by error code

If Windows shows a code, match it here before trying the longer repairs.

CodeWhat Microsoft says it meansFix
0x8007000dUpdate files or cache corruptedRun the troubleshooter, then clear the cache (Step 6)
0x800705b4Update took too long or was interruptedCheck the connection, pause antivirus or firewall briefly, restart
0x80240034Update stuckConfirm Windows Update is running in services.msc, run the troubleshooter
0x800f0922Not enough space or component problemFree up space and turn off any VPN
0x80070057 or 0x80080005Corrupted files or configurationRun sfc /scannow, then the troubleshooter
0xC1900101Incompatible driverUninstall and reinstall the network or display adapter driver, then restart
0x80248014Update service not runningRun the troubleshooter and start Windows Update in services.msc
0x80070005Access deniedUse an admin account and pause antivirus briefly
0x80070002Update failed to installRestart, run the troubleshooter, check free space

For a different code, see our post on Windows Update error 0xc1900223.

Stuck at a percentage

Microsoft gives different advice depending on where the progress bar froze.

  • 0% or 100%: restart the PC, check your connection and confirm you have enough free space.
  • 51% to 99%: go to Settings > Windows Update > Check for updates, or run the troubleshooter.

Give the PC a reasonable wait first, then restart only if nothing moves.

Advanced: rename the update folders

Microsoft recommends this only if you are comfortable with the command line.

  1. Search for command prompt and select Run as administrator.
  2. Enter these commands one at a time, pressing Enter after each: net stop bits, then net stop wuauserv.
  3. Run ren %systemroot%\softwaredistribution softwaredistribution.bak.
  4. Run ren %systemroot%\system32\catroot2 catroot2.bak.
  5. Run net start bits, then net start wuauserv.
  6. Close Command Prompt and restart the PC.

Advanced: repair system files and the drive

If the update still fails, damaged Windows files may be the cause.

  1. Open Command Prompt as administrator.
  2. Run DISM.exe /Online /Cleanup-image /Restorehealth and make sure it reports success, rerunning it if not.
  3. Run sfc /scannow and wait until it reaches 100%.
  4. Close the window and try Windows Update again.

Microsoft also lists chkdsk /f C:, which asks you to restart so the drive repair can run.

Third-party security software and clean restart

Microsoft says to temporarily remove third-party security software, update Windows, then reinstall it.

Before you uninstall it, make sure you have its reinstall files and product keys.

Microsoft also offers a clean restart, which starts Windows with minimal drivers and startup programs so you can rule out software conflicts.

When nothing works

Microsoft lists a clean installation of Windows 11 as the last resort, using the Download tool now option on its Windows 11 download page.

Back up your files first, because a clean install is a big step.

Microsoft also suggests the Feedback Hub for problems you cannot solve.

If your update fails with a TPM message, read our guide to fixing TPM device not detected.

Update drivers and finish with a restart

Microsoft says drivers for hardware you added yourself can block updates, so check the maker’s website for newer versions and install them first.

Once an update is ready, save your work and close your apps.

  1. Select Start > Power.
  2. Choose Update and restart or Update and shut down.
  3. Let the PC finish without switching it off.

Files missing after an update

If files seem gone after an upgrade, Microsoft points to its separate guide called Find lost files after upgrading Windows.

Do not reset or reinstall until you have read it.

Source

All steps above follow Microsoft’s Troubleshoot problems updating Windows support article.

Leave a Reply

Your email address will not be published. Required fields are marked *