Fix AVerMedia Capture Card Not Detected On Windows Or Mac (2026)
An AVerMedia capture card that Windows or macOS cannot see is usually a USB port, cable or USB controller driver problem.
AVerMedia publishes FAQ answers for exactly this, including one written for the Live Gamer Ultra 2.1 (GC553G2).
This guide puts those steps in order, starting with the quickest checks.
Quick answer: what to try first
Test the card after each change.
| Step | What to do | Source detail |
|---|---|---|
| 1 | Use a USB 3.2 Gen 2 (10 Gbps) or Thunderbolt port | AVerMedia GC553G2 FAQ |
| 2 | Use the USB 3.0 C-to-C cable in the box | Same FAQ |
| 3 | Wait about 10 seconds between unplugging and replugging | Same FAQ |
| 4 | Connect directly to the computer, with no hub or adapter | AVerMedia USB capture FAQ |
| 5 | Update the USB 3.x controller driver | Same FAQ |
Check whether the computer sees the device at all
AVerMedia’s USB capture FAQ starts by asking whether the operating system detects the device.
- On Windows, open Device Manager and look under Sound, video and game controllers.
- On a Mac, look in the USB section of System Report.
If the device appears there but not in the capture software, skip ahead to the camera privacy step below.
Use the right USB port
For the GC553G2, AVerMedia says to use a USB 3.2 Gen 2 (10 Gbps) or Thunderbolt port.
Its user manual adds that the Type-C port should support USB 3.2 Gen 2 or higher, and that Gen 1 lowers the capture resolution.
For other USB capture devices, AVerMedia says to connect to a USB 3.0 port without an adapter or hub.
It also says to avoid the front panel of a PC, since it may not supply enough power.
Use the included cable and no adapters
AVerMedia tells GC553G2 owners to use the USB 3.0 C-to-C cable that comes with the device.
On a Mac, connect the USB-C port directly to the card with that cable, without any adapters.
If the computer does not recognize the card, leave about 10 seconds between unplugging and plugging it back in.
Try a motherboard USB connection and restart
If the card is still not recognized, AVerMedia has a more hands-on step.
- Unplug the GC553G2.
- Connect it directly to a USB connector on the motherboard.
- Restart the computer.
- Plug the device back in once the Windows logo appears.
Update the USB controller driver
AVerMedia says to install the latest USB 3.x controller driver from your motherboard or laptop manufacturer.
If needed, it says to use the driver from the controller’s chipset vendor, such as Intel, AMD or Renesas.
If the problem continues, connect the device to a port on an Intel native host controller.
Reduce USB bandwidth use
If many devices share the same internal hub or controller, AVerMedia says to disconnect some or move them to other ports.
Our guide to USB devices that keep disconnecting in Windows 11 covers related checks.
Turn off USB power saving and use High Performance
AVerMedia lists two Windows power settings.
- In the USB hub’s power management settings, turn off the option that lets the computer shut the device off to save power.
- In Windows power options, choose the High Performance plan instead of Power Saver.
These stop Windows from cutting power to the capture card.
If the card shows in Device Manager but not in the software
AVerMedia says to check camera access in the Windows Privacy & security settings.
Make sure camera access is enabled, then reconnect the device.
Our guide on capture cards blocked by Windows privacy settings shows the exact toggles, including desktop apps.
What the GC553G2 LED colours mean
AVerMedia’s user manual lists the status LED meanings.
| LED | Meaning |
|---|---|
| Blue comet | Detecting device |
| Rainbow wave | Ready |
| Flashing blue | Updating firmware |
| Solid red | Error: No Device Detected |
| Flashing red | Error: Device Anomaly |
| Flashing orange | Error: Device Connected to USB 2.0 |
If the LED flashes orange, move the device to a USB 3.2 Gen 2 Type-C port.
If the firmware update fails (GC553G2 and GC575, Windows)
AVerMedia has a separate FAQ that depends on where the update stops.
| Update fails at | What AVerMedia says |
|---|---|
| 25% | Camera access may be disabled in Windows 11 Privacy and security settings; enable it |
| 0% | Close RGB lighting software, restart, then re-enable the RGB device and run the update tool immediately |
At 0%, also check Device Manager.
If it shows “AVerMedia LED Module” instead of “Live Gamer 4K 2.1 – RGB”, uninstall that device, then run the firmware update tool immediately.
GC553G2 system requirements and 4K144 setting
A computer below the listed requirements can capture poorly even when the card is detected.
| Item | Windows 10 x64 / 11 x64 or later |
|---|---|
| Desktop | Intel Core i5-6XXX or AMD Ryzen 3 XXX or better, plus NVIDIA GTX 1060 or AMD RX 5700 or better |
| Laptop | Intel Core i7-7700HQ plus NVIDIA GTX 1050Ti or better |
| Memory | 8 GB RAM recommended (dual-channel) |
| 4K144 MJPEG capture | Intel Core i5-12XXX or better, NVIDIA RTX 3060 or better, 16 GB RAM |
To use 4K144 on Windows, the manual says to install or update to the latest RECentral 4.
- Open RECentral 4.
- Go to Setting, then Device, then 4K144.
- Click On before recording.
The manual also says the console and display should support HDMI 2.1 for the highest modes.
If your monitor uses DSC (Display Stream Compression), it says pass-through may be limited to 4K120.
Mac notes from the manual
The GC553G2 manual lists macOS 13 or 14 or later as a requirement.
It says macOS does not support HDR capture because the required video codec is missing.
It also says 4K60 MJPEG capture on macOS requires an M1 Ultra or M2 Ultra or newer.
When to contact AVerMedia
If the card is still missing after these steps, AVerMedia directs users to its support Contact Us section.
Sources: Why is my GC553G2 not recognized, USB capture device cannot be found, GC553G2 and GC575 firmware upgrade fail and the GC553G2 user manual.