How To Update The BIOS On An ASUS Laptop (2026)
On an ASUS laptop, the usual way to update the BIOS is through the MyASUS app, and ASUS also offers Windows Update, a downloadable installer and EZ Flash.
This guide follows ASUS’s own support pages, including the power and BitLocker precautions ASUS lists.
Some models cannot update the BIOS from inside Windows, so the last methods below cover that case.
Quick answer
| Method | Where to start | Notes from ASUS |
|---|---|---|
| MyASUS | MyASUS > System Update > BIOS Update for Windows > Update Selected Items | If the System Update tab is missing, use another method |
| ASUS support site | Download BIOS Update for Windows for your model, then run it | Extract the file first if it is zipped |
| Windows Update | Settings > Windows Update > Check for updates | Only for ASUS products pre-installed with Windows 10 or 11 |
| EZ Flash | BIOS setup > Advanced > ASUS Firmware Update | The fallback when a model has no Windows updater |
| Cloud Update | BIOS setup > Firmware Update > Cloud Update | Listed for newer platforms such as Intel Arrow Lake and AMD Krackan Point |
Before you update
ASUS lists a few precautions that apply to every method.
- Keep the AC adapter connected and never force a shutdown during the update.
- Keep the battery above 20 percent, because some 2025 update screens start the update on their own once the charge passes that level.
- Save and close your work before restarting.
- Back up your data.
ASUS says an interrupted BIOS update can leave the system malfunctioning and in need of a repair center.
Plan for BitLocker
ASUS warns that the update may ask for your BitLocker recovery key.
You can avoid that by temporarily turning off Device Encryption and standard BitLocker encryption before the update, then turning them back on afterward.
Our guides to suspending BitLocker and finding your recovery key cover the steps.
Check your system type
ASUS says to open Settings > System > About and read System type before you start.
| System type | What to use |
|---|---|
| x64 | The MyASUS, support site, Windows Update and EZ Flash steps in this guide |
| ARM (such as Qualcomm platforms) | The BSP package in MyASUS System Update, or the Board Support Package from the Driver Package category on the support site, which updates the BIOS and related drivers |
Update with MyASUS
- Search Windows for MyASUS and open it.
- Click System Update.
- Wait for MyASUS to list pending updates, and note that an empty list means the system is current.
- Select BIOS Update for Windows or BIOS Installer for Windows, then click Update Selected Items.
- Confirm the download.
- When the download finishes, click Restart.
The PC then restarts into the BIOS update screen, where you confirm the start and wait for it to finish before clicking OK to return to Windows.
On the 2025 interface, the update may start from a system notification and restart several times before Windows loads.
To check the result, open Update history in MyASUS, and if you need help with the app itself, see what to do when MyASUS is not working.
If you reinstalled Windows and some drivers are missing in Device Manager, MyASUS cannot compare versions and will not show updates, so download the BIOS from the ASUS support site instead.
Update from the ASUS support site
- Go to the ASUS support site and enter your exact model name.
- Open the BIOS Update (Windows) category and download BIOS Update for Windows or BIOS Installer for Windows.
- If the file is zipped, extract it, then run the BIOS Update application.
- Click Next in the setup wizard.
- Accept the license agreement and click Next.
- Choose to restart now and click Finish.
The PC restarts into the same BIOS update screen described above.
Update through Windows Update
ASUS says only products pre-installed with Windows 10 or 11 receive BIOS updates this way.
- Search for Windows Update settings and open it.
- Click Check for updates.
- If a restart is needed, choose Restart now or Schedule the restart.
When a BIOS update is waiting, ASUS says you may see a restart-required message, and you can also check Device Manager > Firmware > System Firmware > Properties.
After the restart a BIOS update screen shows a progress bar that moves on its own, and the update is complete once Windows loads.
Update with EZ Flash
Use EZ Flash when your model has no Windows BIOS updater, or when Windows will not start.
- Download the BIOS file for your model from the ASUS support site, in the BIOS category.
- Extract the archive and copy the BIOS file to a USB drive formatted as FAT32.
- With the PC off, hold F2, press the power button, and keep holding F2 until the BIOS setup screen appears.
- Press F7 or click to switch to Advanced Mode, then open the Advanced screen.
- Select ASUS Firmware Update, which some models label ASUS EZ Flash 3 Utility.
- Choose the USB drive and the BIOS file, then confirm with Yes.
- Check the file information, confirm again, and wait for the PC to restart into Windows.
In the Legacy interface you navigate with the arrow keys and Enter only.
If you cannot reach the setup screen, see how to open BIOS or UEFI in Windows 11.
Update with Cloud Update
ASUS lists Cloud Update for devices with Intel Arrow Lake, AMD Krackan Point and later platforms.
- With the PC off, hold F2 and press the power button.
- Click Firmware Update, then select Cloud Update.
- Connect by Ethernet or pick a wireless network and enter the password.
- If an update is found, click Next to download it.
The download takes about 1 to 5 minutes and uses about 32 MB, and the update then starts on its own.
ASUS says Wi-Fi 6 or 6E cards may fail to connect to Wi-Fi 7 routers, so try another access point or a phone hotspot if the connection fails.
Limits to know about
| Topic | What ASUS says |
|---|---|
| Downgrading | Not allowed |
| Which file | ASUS file names combine the model, the letters AS and the version, so B9450FAAS.302 is version 302 for model B9450FA |
| Ethernet for Cloud Update | A USB-to-Ethernet adapter must be an ASUS one, because other brands may not work |
| Screens and steps | Can differ by model, so contact an ASUS Service Center if you hit problems |
If the update was interrupted
ASUS says to make sure power is connected and restart to see whether the update resumes.
If it does not resume and the screen stays blank, ASUS says the device may need a repair center.
ASUS also has a guide for restoring BIOS settings after an update, which you can find by searching its support site for How to Restore BIOS Settings.
Before you start, you can confirm your current version with our guide to checking your BIOS version in Windows 11.