How To Fix Emergency Calls Only On Android (2026)

Emergency calls only appears at the top of an Android screen when the phone cannot connect to your carrier’s network.

Samsung says it means there is no active eSIM or SIM, the SIM is damaged, or the signal is too weak.

This guide follows Samsung’s support pages and Google’s Pixel Phone Help page, and you can work through the steps in about 15 minutes.

Quick answer: what the message points to

Likely causeFirst thing to trySource
Weak or blocked signalMove outdoors or near a window, remove the case, restartSamsung
SIM missing, inactive or damagedCheck SIM status, reseat the SIM, test another SIMSamsung and Google
Airplane mode onTurn it off in SettingsSamsung and Google
Bad network settingsReset mobile network settingsSamsung and Google
Account problemCall your carrier about suspension or activationSamsung

Samsung says the message usually means a signal problem, so start with location and restart before you touch the SIM.

What the message tells you

With no SIM, an inactive or damaged SIM, or very low signal, Samsung says the status bar shows Emergency calls only.

Samsung also says emergency calls can still work if any nearby network signal is strong enough, even if it is not your carrier’s.

So the phone can still dial 9-1-1, but normal calls, texts and mobile data will not work until the connection is restored.

Change your location and restart

Samsung’s poor-signal page says outdoors you should move away from tall buildings, parking garages and dense trees.

Indoors, stay near windows or open spaces and avoid basements or enclosed areas.

  1. Take off any bulky case or signal-boosting accessory.
  2. Unplug anything connected to the USB port.
  3. Press and hold the Power button, tap Restart and confirm.

Google adds that you should power the phone off, wait 30 seconds and turn it back on, and not choose Restart.

Turn off Airplane mode

Samsung lists an accidentally enabled Airplane mode as a cause of calling problems.

On a Pixel, open Settings, then Network & Internet, and turn Airplane mode off.

On a Galaxy phone, Samsung says to open Settings, go to Connections or Network and Internet depending on your model, and toggle Airplane Mode off.

Google adds that toggling Airplane mode also restarts active processes.

Check SIM status

PhoneWhere to lookWhat it shows
PixelSettings, Network & Internet, SIMsCarrier name and the Use SIM switch
GalaxySettings, About phone, Status information, SIM card statusWhether a carrier name appears under Network

Google says a grayed-out carrier name with No SIM means the SIM is missing or inactive, and the fix is to turn on Use SIM.

If Use SIM is already on, move on to the physical SIM.

Reseat the SIM card

Samsung and Google give nearly the same steps for a physical SIM.

  1. Power the phone off completely.
  2. Push the eject tool straight into the tray hole and pull the tray out without bending it.
  3. Check the SIM for damage, dirt or bending, and wipe off dust with a soft, dry or microfiber cloth.
  4. Seat the Nano-SIM flat with the gold contacts facing up on a Galaxy, then push the tray fully back in.
  5. Turn the phone on and check the status bar.

Samsung warns not to touch the metal contacts or force the card into the tray, and it says to dry a wet tray completely first.

Test another SIM or another phone

Samsung and Google both say to try a different SIM if you can.

Google adds that if the problem persists, you should test your SIM in another phone.

If your SIM works elsewhere and a working SIM fails in your phone, the fault is likely in the phone, and Samsung’s page points to a service center or repair request.

If you use an eSIM

Samsung says that if you are activating an eSIM during initial setup, you should contact your carrier.

Google says that if an eSIM transfer fails, try again, and contact your carrier if it fails a second time.

Our eSIM transfer guide for Android covers the setup side.

Reset mobile network settings

PhonePath
PixelSettings, System, Reset options, Reset mobile network settings
GalaxySettings, General management, Reset, Reset mobile network settings, then Reset settings

Samsung says this clears saved mobile network configuration and restores default carrier connection settings.

Google also lists Reset Bluetooth and Wi-Fi, which deletes saved Wi-Fi networks, so pick the mobile network option instead.

Check the preferred network type

On a Pixel, go to Network & Internet, then SIMs, then your carrier, and pick a preferred network type.

Google says the choices are 5G, which it recommends, 2G, 3G or LTE, and that the options depend on your carrier.

It also says Battery Saver disables 5G, so turn Battery Saver off if you rely on 5G.

Install software updates

Samsung’s page on calls not working puts a software update first.

  1. Open Settings and select Software Update.
  2. Tap Download and Install and follow the on-screen instructions.

On a Pixel, Google says to check that your Android version is current under Settings, System, System Update.

When to call your carrier

Samsung says to call your carrier to confirm the account is active and not suspended, and to ask about any limits.

It also suggests checking the carrier’s coverage map for your location and asking about an unexpected outage.

Samsung adds that SIM protection services can block a SIM in a new device, so ask your carrier to disable one before you use the SIM in a new phone.

If your carrier confirms everything is fine and the SIM works in another phone, request repair, since Samsung points to a walk-in service center or an online repair request.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *