How To Fix Can’t Hear Caller On Android Calls (2026)
You answer a call on your Android phone and the other person is too quiet or you hear nothing at all.
The cause is often a covered earpiece, a muted setting, Wi-Fi Calling, a weak signal or an app that interferes with calls.
This guide follows the call-audio pages from Samsung and Google, starting with the quickest checks.
Quick answer: what to try first
| Check | What to do |
|---|---|
| Call volume | During a call, press Volume up until it is at the highest level |
| Case or film | Remove any case or screen protector and clean the speaker openings |
| Mute all sounds | Make sure it is switched off in Accessibility settings |
| Wi-Fi Calling | Turn it off and test on the cellular network |
| Restart | Open Quick Settings, tap the Power icon, then tap Restart |
Where each setting lives on a Galaxy phone
| Setting | Path |
|---|---|
| Mute all sounds | Settings > Accessibility > Hearing enhancements |
| Wi-Fi Calling | Settings > Connections, or Phone app > More options > Settings |
| Software update | Settings > Software update > Download and install |
| Factory data reset | Settings > General management > Reset |
Samsung says menus and screenshots may vary by device model and software version.
The Samsung call-audio steps are written for the Galaxy S24, S25 and S26, the Galaxy Z Fold and Z Flip, and the Galaxy A series.
Raise the call volume during a call
Samsung says in-call volume can only be adjusted while a call is active.
Start or answer a call, then press the Volume up key until the in-call volume is at its highest level.
Google also lists turning the volume up or down as a check on its Pixel page.
Check that the earpiece is not covered
Samsung says a screen protector or film that covers the top receiver, the earpiece, can muffle call sound.
If it does, remove the film or replace it with a Samsung-approved screen protector that fits your exact model.
Samsung also says to remove any case, because a case can block the speaker or microphone, and to clean the speaker and microphone openings of debris.
Check the air vent holes
Samsung’s newer call-audio page tells you to find the air vent holes on the top or bottom of the phone.
If a case or protective wrap covers a vent hole, remove or adjust it so the vents are clear.
Samsung’s example is the Galaxy S26 Ultra, where one vent is near the top edge and the camera module.
Turn off Mute all sounds
Samsung says to check that all sounds are not muted.
- Open Settings.
- Tap Accessibility.
- Tap Hearing enhancements.
- Make sure Mute all sounds is off.
Another Samsung page puts the same switch under Settings > Sound and Vibration, so check both places if you cannot find it.
Restart the phone
- Swipe down from the top of the screen to open the Quick Settings panel.
- Tap the Power icon.
- Tap Restart.
- Place a test call after the restart.
A restart clears many temporary glitches that cut off call audio.
Turn off Wi-Fi Calling
Samsung says a poor Wi-Fi connection can reduce call quality, because Wi-Fi Calling uses your network connection.
Open Settings > Connections and turn off Wi-Fi Calling, then test the call again.
You can also reach it from the Phone app by tapping More options, then Settings, then Wi-Fi Calling.
Samsung notes that Wi-Fi Calling may not be available on every carrier or device.
Check signal and try a different spot
Google tells Pixel owners to look at the mobile signal icon at the top of the screen.
If the connection is weak, move outside or to another spot indoors and try again.
Samsung adds that you should test calls with different contacts, to rule out a problem with one person’s phone or network.
| Google’s call checks (Pixel) | What to try |
|---|---|
| Wi-Fi | If Wi-Fi is on, turn it off, then make a call; if it is off, turn it on, then make a call |
| Speakerphone | Turn speakerphone on during a call, then off again |
| Video calls | Turn the video off, then on again |
| Moving vehicle | If you are on a train or in a car, wait until you stop before calling |
Turn off Bluetooth
Google lists turning Bluetooth off as a step, because the call may be playing through a paired headset or car.
Our guide on fixing Bluetooth on Android helps with headset connections.
Test in Safe mode
Samsung says Safe mode turns off third-party apps, so it shows whether an app is causing the problem.
- Swipe down with two fingers to open Quick Settings and tap the Power icon.
- Touch and hold Power off until the Safe mode option appears, then tap Safe mode.
- Make a test call.
If the problem goes away, uninstall recently downloaded apps one at a time and test calls after each removal.
Our guide to starting Android in Safe mode has the full steps.
Update before you start
Samsung’s call-sound page begins by telling you to update your device software and apps.
Do that first if you have not, at Settings > Software update > Download and install.
Factory data reset as a last resort
Google and Samsung both list a factory reset only after the other steps fail.
On a Galaxy phone, open Settings > General management > Reset > Factory data reset, tap Reset and confirm.
A reset erases everything, so back up your data first.
Our guide to Android volume and sound problems covers sound outside of calls.
When to contact support
For a Galaxy phone, Samsung lists chat on its contact page, the Samsung Members app and a nearby Samsung service center.
For a Pixel, Google says to contact Pixel support if you still cannot hear sound or if all sounds are distorted after a restart.