How To Turn Off Fast Startup On Windows 11 (2026)
Fast Startup makes Windows 11 boot quicker, but it can also leave a PC in a half-asleep state that causes odd update and dual-boot problems.
Turning it off takes one checkbox in the classic Control Panel, because the Settings app has no switch for it.
This guide covers that checkbox plus the command-line, registry and policy routes.
Quick answer
| Method | Where | Needs admin |
|---|---|---|
| Control Panel (easiest) | Power Options > Choose what the power buttons do > clear Turn on fast startup | Yes, to unlock the greyed-out option |
| Command Prompt | Run powercfg /h off | Yes |
| Registry | HiberbootEnabled set to 0 | Yes |
| Group Policy | Require use of fast startup set to Disabled | Yes, Pro or higher |
What Fast Startup does
Microsoft explains that during Fast Startup the kernel session is not closed but hibernated.
Windows saves the kernel session and device drivers to the hiberfil.sys file instead of closing them when you shut down.
On the next boot it loads that saved state, which is why startup is faster than a cold boot.
Pureinfotech adds that open desktop sessions and running apps are not saved.
Microsoft also says Fast Startup is enabled by default in Windows, which is why most PCs use it without the owner ever choosing it.
Why Restart behaves differently
Microsoft states that the Fast Startup setting does not apply to Restart.
A restart performs a full boot cycle, because it usually means you want a completely fresh Windows state.
So if a problem disappears after Restart but returns after Shut down, Fast Startup is a prime suspect.
When turning it off makes sense
Pureinfotech advises disabling it only when it causes trouble with updates, conflicts with apps, or when you set up a dual-boot system.
| Reported problem | Source |
|---|---|
| Conflicts with installing updates | Pureinfotech |
| Complicates access to encrypted storage devices | Pureinfotech |
| Blocks the other operating system from reading the drive in a dual-boot setup | Pureinfotech |
| Can prevent access to the motherboard UEFI (BIOS) on some systems | Pureinfotech |
| Shutdown or hibernate fails and returns to the lock screen | Microsoft Learn, Windows 10 article |
Microsoft’s own article says disabling Fast Startup is not recommended, so leave it on if nothing is wrong.
Turn it off in Control Panel
- Open Start and search for Control Panel.
- Open Hardware and Sound, then Power Options.
- Select Choose what the power buttons do in the left pane.
- Select Change settings that are currently unavailable.
- Clear Turn on fast startup.
- Select Save changes.
Pureinfotech notes that Fast Startup cannot be changed in the Settings app, so this classic page is the normal route.
If the option is greyed out or missing
Lenovo says that if the option is greyed out, you should click Change settings that are currently unavailable and approve the User Account Control prompt.
ElevenForum adds that if the checkbox is missing entirely, hibernate has to be enabled first, because Fast Startup depends on it.
You need to be signed in as an administrator to change the setting.
Turn it off with powercfg
- Search for Command Prompt or PowerShell.
- Right-click the top result and choose Run as administrator.
- Type powercfg /h off and press Enter.
This disables hibernation entirely, which also disables Fast Startup, so it is a broader change than the checkbox.
To bring it back, run powercfg /h on in an administrator window.
Turn it off in the registry
- Search for regedit and open it.
- Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power.
- Double-click the HiberbootEnabled value.
- Change it from 1 to 0 and select OK.
- Restart the PC.
Set the value back to 1 to undo it, and back up the registry before editing as Microsoft always advises.
Block or require it with Group Policy
On Windows 11 Pro, Enterprise and Education you can open gpedit.msc and go to Computer Configuration, Administrative Templates, System, Shutdown.
ElevenForum says the Require use of fast startup policy, when set to Enabled, forces the feature on and blocks the Control Panel and registry methods from changing it.
Leave it at Not Configured, the default, if you want those methods to work.
Skip Fast Startup for a single shutdown
| Command | Behavior (per Microsoft Learn) |
|---|---|
| Shutdown /s /t 0 | Full shutdown, the default for Shutdown.exe |
| Shutdown /s /hybrid /t 0 | Uses the Fast Startup behavior |
Use the first command when you want one clean shutdown without changing the setting.
What you give up
ElevenForum readers report slower boots with Fast Startup off, especially with external USB drives, though that is user feedback and not Microsoft guidance.
ElevenForum also says that setting the hibernate file type to reduced cuts hiberfil.sys to about half its full size if you want Fast Startup without full hibernate.
If shutdown fails and returns to the lock screen
Microsoft’s article describes a case where shutting down or hibernating fails and the PC drops back to the Windows lock screen.
| What you see in Event Viewer | Meaning (per Microsoft) |
|---|---|
| Event ID 45 in the System log | May be logged when the failure happens |
| Code C0000034 | STATUS_OBJECT_NAME_NOT_FOUND |
| Code C004002D | IO_DUMP_DRIVER_LOAD_FAILURE |
Microsoft says the cause is that Windows initializes the memory dump configuration during hibernation, and the dump driver is not loaded.
Its registry fix is to open HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\CrashControl, check the DumpFilters value, and leave dumpfve.sys as the only entry.
Restart afterwards to enable Fast Startup again, and back up the registry first.
That article is written for Windows 10, so treat it as a lead for Windows 11 and not a guaranteed match.
See the change after a full shutdown
Lenovo points out that Fast Startup applies only to shutdowns and that restarts are not affected.
Shut the PC down completely and power it on again to judge the new startup time, because a restart will not show any difference.
Check that it is off
ElevenForum shares a PowerShell check: read the HiberbootEnabled value under HKLM:\SYSTEM\CurrentControlSet\Control\Session Manager\Power.
A value of 1 means Fast Startup is on and 0 means it is off.
Turn Fast Startup back on
Tick Turn on fast startup in the same Control Panel page, or set HiberbootEnabled back to 1, or run powercfg /h on if you disabled hibernation.
Related Windows 11 guides
- Fix Windows 11 updates that are stuck or failing
- Disable startup apps in Windows 11
- Stop Windows 11 from sleeping or turning off