How To Fix A Touchscreen Not Working In Windows 11 (2026)
A touchscreen that ignores your finger, responds in the wrong spot or only works on part of the screen leaves a Windows 11 laptop or tablet half useful.
Microsoft’s own advice starts with a restart and updates, and its Surface pages add a driver reinstall and a test that tells you whether the screen itself has failed.
This guide puts those steps in order, so you can stop at the first one that brings touch back.
Quick answer: what to try first
| Step | What to do | Applies to |
|---|---|---|
| 1 | Restart the device | Any Windows 11 touchscreen |
| 2 | Install Windows Update and optional updates, then restart again | Any Windows 11 touchscreen |
| 3 | Check for updates in the Surface app | Surface devices |
| 4 | Boot to UEFI and tap the screen | Surface devices |
| 5 | Uninstall the touch drivers in Device Manager and scan for hardware changes | Surface devices |
| 6 | Reset this PC, only after the steps above | Surface devices |
If you cannot use touch to get around, a mouse or the keyboard is enough for every step below.
Step 1: restart the device
Microsoft’s first instruction for any Windows touchscreen that does not respond is a plain restart.
- Select Start.
- Select Power, then Restart.
- Test touch again before you change anything else.
Use Restart rather than Shut down, so the PC reloads its drivers from scratch.
Step 2: install Windows Update and optional updates
Touch drivers often arrive as optional updates, so a plain Check for updates can miss them.
- Right-click Start and select Settings, then Windows Update, then Advanced options.
- Turn on Receive updates for other Microsoft products.
- Under Additional options, select Optional updates.
- Select all the optional updates, then select Download and install.
- Go back to Windows Update and select Check for updates.
- Install everything that appears, then restart even if Windows does not ask you to.
Microsoft says to restart after the updates finish even when no update asked for it.
Our guide to checking for updates in Windows 11 covers the screens in more detail.
Step 3: check the Surface app (Surface only)
Surface devices get firmware and driver updates through the Surface app as well as Windows Update.
- Open the Surface app and expand Help & support.
- If updates are listed, select Check for updates, which opens Windows Update.
- Install what it offers and restart.
If the Surface app is missing, install it from the Microsoft Store, then search for Surface in Start to open it.
Step 4: test touch outside Windows (Surface only)
This test tells you whether Windows or the hardware is at fault.
- Select Start, then Power, then Shut down.
- With the Surface off, hold the volume up button and press the power button until the Microsoft or Surface logo appears.
- In the UEFI screen, tap the screen and try the menu items.
If touch does not work there, Microsoft says the touchscreen likely has a hardware failure and you should order service.
If touch works, select EXIT, follow the prompts to restart Windows and carry on with the next step.
Step 5: reinstall the touchscreen driver
Microsoft’s Surface page removes the touch drivers and lets Windows download them again.
- Type device manager in the taskbar search box and open Device Manager.
- Expand Human Interface Devices.
- Right-click Intel(R) Precise Touch Device, select Uninstall device, then select Uninstall.
- Right-click HID-compliant touch screen, select Uninstall device, then select Uninstall.
- If a second HID-compliant touch screen is listed, remove that one the same way.
- Open the Action menu and select Scan for hardware changes, and restart the Surface if needed.
With an internet connection, the driver downloads and installs itself.
Microsoft warns not to do this on a Surface Pro X, where restoring drivers needs a full system reset.
| Device Manager entry | Where to find it | What Microsoft says to do |
|---|---|---|
| Intel(R) Precise Touch Device | Human Interface Devices | Uninstall device, then Scan for hardware changes |
| HID-compliant touch screen | Human Interface Devices | Uninstall device, then Scan for hardware changes |
| Second HID-compliant touch screen | Human Interface Devices | Uninstall it after the first one |
| Surface Touch driver or firmware with a yellow mark | Device Manager | Install the drivers for your model manually |
Open Microsoft Edge afterwards and test scrolling, pinch-to-zoom, swiping in from the right and a long press.
On other makes, the same Device Manager entry is the place to look, and our guide to updating a driver in Windows 11 shows how to update rather than remove it.
Is touch switched off on purpose?
Touch can be turned off in Device Manager, and that is easy to forget on a shared or repurposed PC.
Microsoft notes that disabling all touch also disables Surface Pen, Surface Dial and the Windows touch keyboard.
Our guide to turning the touchscreen off in Windows 11 shows where that switch is, so you can turn it back on.
What your symptom points to
Microsoft’s Surface page sorts the problems that updates and drivers will not fix.
| What you see | What Microsoft recommends |
|---|---|
| Touch fails on part or all of the screen, but the mouse and keyboard work | Submit a service order |
| Single touch works, but multi-touch fails or the wrong part of the screen responds | Submit a service order |
| Phantom touches or white dots on the screen | Check for nearby electronic interference, move the Surface or the equipment, then order service if it persists |
| Touch responds slowly | Follow Microsoft’s guide for a Surface that runs slowly |
| Surface Touch driver or firmware is missing or has a yellow mark in Device Manager | Manually install the drivers and firmware for your Surface model |
| Pen does not ink | Follow Microsoft’s Surface Pen troubleshooting |
Our guide to a Surface Pen that is not working covers the pen side.
If the screen touches itself
Ghost touches are taps you never made, and Microsoft tells you to check for electronic interference near the device.
- Move the PC away from other electronics and equipment.
- Relocate the Surface or the equipment that sits near it.
- Run the driver steps above.
If the taps continue, Microsoft says to submit a service order.
Step 6: reset the PC as a last resort
If the steps above change nothing, Microsoft’s final software step for a Surface is Reset this PC.
- Back up your files first.
- Follow Microsoft’s Restore or reset Surface guide and choose the Reset this PC steps.
- When setup finishes, repeat the touch tests in Edge.
A reset removes apps and settings, so do it only when updates and the driver reinstall have failed.
Getting the screen repaired
When the tests point to hardware, Microsoft’s Surface page lists four routes.
- Self-repair, for experienced users with the right tools, using Microsoft’s replacement parts and service guides.
- Send the device to Microsoft by creating a service order and printing a shipping label.
- In-person support through an Authorized Service Provider in some countries or regions.
- Business or education devices follow Microsoft’s separate service options for those customers.
For a non-Surface laptop, the PC maker’s support site is the place to start.
Other devices that stop responding
- Keyboard: fix a keyboard not working in Windows 11.
- Touchpad: fix a touchpad not working in Windows 11.
- Mouse: fix a mouse not working in Windows 11.