ChargePoint Home Flex Review: Specs, Install And Verdict (2026)
The ChargePoint Home Flex is a Level 2 home EV charger that you can plug into a 240V outlet or hardwire, and it adds range at up to 37 miles per hour.
It is a good fit for most single-family homes with a dedicated 240V circuit, as long as you are happy to use an app for scheduling.
Below are the verified specs, the install options, and the limits to know before you buy.
Buy links go to Amazon, and TheDroidGuy may earn a commission from them.
Quick take: ChargePoint Home Flex at a glance
| Spec | ChargePoint Home Flex (CPH50) |
|---|---|
| Max power | 12 kW (240V, 50A) |
| Adjustable output | 16A, 24A, 32A, 40A, 48A, 50A, set in the app |
| Cable length | 23 ft |
| Connector | SAE J1772 or NACS, depending on the model |
| Install | NEMA 6-50 or 14-50 plug, or hardwire |
| Wi-Fi | 2.4/5 GHz |
| Outdoor rating | Type 3R (UL 50E) |
| Warranty | 3 years on parts |
These figures come from ChargePoint’s own datasheet.
How do you install the Home Flex?
You choose between a plug-in and a hardwired install.
- Plug-in: a NEMA 6-50 or 14-50 plug that works only on 40A or 50A circuits.
- Hardwire: supports breaker ratings from 20A to 80A and delivers up to 50A.
- NEMA 6-50: needs no neutral wire, which ChargePoint says may lower installation cost.
Hardwiring is the recommended option for outdoor installs, and it is required if local code calls for a GFCI breaker.
Plugs are not sold separately, so a unit that arrived without a plug is a hardwire model.
What breaker do you need?
ChargePoint requires a dedicated dual-pole breaker rated at 125% of the maximum load.
For example, a 40A output needs a 50A breaker.
Higher settings may need a panel upgrade, so have an electrician check your panel capacity first.
How fast does it charge?
Speed depends on the amperage you set, and ChargePoint publishes range per hour for each step.
| Setting | Miles of range per hour | Max power | Breaker |
|---|---|---|---|
| 16A | 12 | 3.8 kW | 20A |
| 24A | 18 | 5.8 kW | 30A |
| 32A | 25 | 7.7 kW | 40A |
| 40A | 30 | 9.6 kW | 50A |
| 48A | 36 | 11.5 kW | 60A |
| 50A | 37 | 12 kW | 70A or 80A |
ChargePoint says 32A and 40A are the most popular settings.
Relative range per hour at 50A, compared with the 16A setting:
The top bar is 37 miles per hour at 50A, and the short bar is 12 miles per hour at 16A.
What does the ChargePoint app do?
Wi-Fi connects the charger to the ChargePoint app, which handles scheduled charging, reminders and remote start.
- It can suggest charging times based on local utility rates.
- It shows miles added for your car model.
- It helps you find public stations.
- Voice start works through Amazon Alexa.
A ChargePoint account is required, and only one account can be linked to each home charger.
If Wi-Fi drops, the charger still follows its saved schedule, and there is no recurring fee for home use.
How do you set it up and change the amperage?
An electrician sets the initial amperage at installation to match your breaker, wiring and panel capacity.
Until the charger is activated and an amperage is chosen, it charges at 16A by default, which is the slowest setting in the table above.
After that you can change the station-to-vehicle rate in the app, but ChargePoint says it cannot exceed 80% of your breaker amperage or the charger’s maximum.
To fix a wrong setting later, ChargePoint points to Home Charger > Settings > Breaker Amperage in the app.
What do the LED colors mean?
| Light | Meaning |
|---|---|
| Green | Ready to charge; blinking means a schedule is set |
| Blue | Plugged in; pulsing means actively charging |
| White | Not connected to Wi-Fi; blinking means activation is needed |
| Red | A problem; contact support |
You can dim the LED ring and Wi-Fi indicator, or turn the LED off, in the app.
What if the Home Flex will not connect or shows a fault?
ChargePoint’s troubleshooting page covers the common cases.
| Problem | What ChargePoint suggests |
|---|---|
| Wi-Fi will not connect | Check another device works on your Wi-Fi, restart the router, and try a different spot or a range extender |
| Changed Wi-Fi name or password | Choose Reconfigure WiFi in the charger settings in the app |
| App cannot find the charger | Stand within a few feet of it with Bluetooth on |
| Red fault light | Unplug and replug the connector, then restore factory default in the app, then flip the circuit breaker, stopping once it clears |
| General glitch | Reboot Charger in the app under Home Charger > Settings |
| Still stuck | Call 1-888-758-4389 |
A car that shows a plugged-in-but-not-charging message during a scheduled window is expected to charge when the schedule starts, according to ChargePoint.
How do you charge on a schedule?
- Open the ChargePoint app and go to your home charger.
- Set a schedule based on your local utility rates, which the app may suggest.
- Adjust the start and end times, and use different times for weekdays and weekends.
- To charge right away while a schedule is active, unplug and replug within a few seconds.
Plug-in reminders send an alert if the car is not plugged in at the scheduled time.
What safety and weather ratings does it have?
| Feature | Detail |
|---|---|
| Enclosure | Type 3R per UL 50E |
| Listings | UL and cUL listed |
| Efficiency | ENERGY STAR certified |
| Ground fault | 20 mA CCID with auto retry |
| Operating temperature | -22°F to 122°F |
| Weight | 13.8 lb |
That Type 3R rating means it is built for outdoor use.
Does it work with Tesla and other EVs?
The J1772 model fits most EVs, and ChargePoint says Tesla owners can use the adapter that came with their car.
ChargePoint also lists a NACS version, so check which connector the listing you buy describes.
What are the limits to know before you buy?
- Residential use only: business installs may void the warranty.
- Housing type: it is designed for single-family homes, and condo use works only if the space uses your own electricity.
- One account: only one ChargePoint account can be linked to a charger.
- Wi-Fi for smart features: scheduling and remote start rely on the connection.
- Warranty: parts are covered for 3 years.
Support is available 24/7 at 1-888-758-4389, per ChargePoint.
Who should buy the Home Flex?
It suits drivers who want a plug-in option now and the ability to hardwire later, with app scheduling.
If you are still weighing the switch, read our EVs vs gas cars breakdown first.
Our verdict
The Home Flex is a flexible, well-rated charger that covers most home setups, with outdoor protection and an adjustable output up to 50A.
Its limits are the dedicated breaker, residential-only use and a 3-year parts warranty.
Sources: ChargePoint Home Flex datasheet and ChargePoint Home before you buy.
I have this charger. Generally it is good, but I don’t like that every interaction with the charger goes through the WWW. It would be better if all interactions were local. I charge at home when I am at home. No need for internet. Imagine not being able to wash your clothes or take a shower because the internet is down or their site is down.