|

How To Fix A Surface Touchscreen Not Working (2026)

When a Surface touchscreen stops responding, the first job is to find out whether Windows or the hardware is at fault.

Microsoft’s Surface page gives a simple test for that: check whether touch works in UEFI, which runs without Windows.

This guide follows Microsoft’s order of fixes and explains which symptoms point to a repair.

Quick answer: what to try in order

OrderFixWhat it tells you
1Test touch in UEFITouch failing there points to hardware
2Reinstall the touchscreen drivers in Device ManagerFixes a driver fault inside Windows
3Install Surface and Windows updatesBrings in the latest drivers and firmware
4Reset the SurfaceLast software step before service

Before you start

Some steps need a keyboard or mouse, so keep one connected.

Back up your files first, because the last steps can end in a reset or a replacement.

Restart the Surface once before anything else, as Microsoft’s Windows page does.

Test touch in UEFI

UEFI runs separately from Windows, so it is the cleanest test of the screen itself.

  1. Select Start, Power, then Shut down.
  2. With the Surface off, press and hold the volume-up button.
  3. While holding it, press the power button until the Microsoft or Surface logo appears.
  4. In UEFI, tap the screen and tap several menu items.

If touch does not work there, the touchscreen has most likely failed and it is time to look at service.

If touch works, select Exit, follow the prompts and let Windows start, then move on to the driver step.

Check that the touchscreen is turned on

Touch can fail simply because the device was disabled in Windows.

  1. Right-click the Start menu and select Device Manager.
  2. Expand Human Interface Devices.
  3. Right-click HID-compliant touch screen and look at the menu.
  4. If it offers Enable device, select it; if it offers Disable device, the screen is already on.
  5. Repeat for every HID-compliant touch screen listed.

This is the same switch people use to turn touch off on purpose.

Reinstall the touchscreen drivers

  1. Type device manager in the taskbar search box and open it.
  2. Expand Human Interface Devices.
  3. Right-click Intel(R) Precise Touch Device, select Uninstall device, then select Uninstall.
  4. Right-click HID-compliant touch screen, select Uninstall device, then Uninstall.
  5. If a second HID-compliant touch screen is listed, remove that one too.
  6. Open the Action menu, select Scan for hardware changes and restart if asked.

The driver downloads and installs again by itself when the Surface is online.

Do not use this step on a Surface Pro X, because the drivers can then only come back through a full system reset.

Test touch afterwards

Open Microsoft Edge or another browser and try a few gestures.

GestureWhat to try
ScrollDrag a finger up and down a long page
ZoomPinch two fingers in and out
Swipe in from the rightOpens the right-hand panel
Long pressHold a finger on an item

Install Surface and Windows updates

  1. Open the Surface app, or install it from the Microsoft Store.
  2. Expand Help & support to see the update status.
  3. Select Check for updates and install what is listed.

Microsoft’s Windows touchscreen page adds one more route.

  1. Right-click Start and select Settings, then Windows Update, then Advanced options.
  2. Turn on Receive updates for other Microsoft products.
  3. Under Additional options select Optional updates, choose them all and select Download and install.
  4. Restart afterwards, even if Windows does not ask you to.

Reset the Surface

If nothing has worked so far, reset Windows from Start, Settings, System, Recovery, then Reset PC.

Microsoft recommends the Cloud download option and an internet connection while it runs.

OptionWhat it keepsWhat it removes
Keep my filesPersonal files and the apps that came with the PCSettings changes and apps and drivers you installed
Remove everythingOnly the apps that came with the PCPersonal files, settings changes, installed apps and drivers
USB recovery driveNothingAll personal files, settings and installed apps

Microsoft says to try Keep my files first, and to use a USB recovery drive if the reset fails.

If you cannot sign in, retrieve your password before you reset.

After setup finishes, run the same touch test again.

A reset removes the software cause, so a failure afterwards points firmly at hardware.

Ghost touches and white dots

Phantom touches, white dots on the screen, or interference while you use the mouse or type are treated separately.

Microsoft says this can be electronic interference rather than a broken screen.

  1. Move the Surface to a different spot.
  2. Move any nearby equipment that could interfere.
  3. Test again for a while before you decide it is a fault.

If it keeps happening, submit a service order.

Reaching reset when touch will not work

You can start a reset without touching the screen.

  1. Press Windows logo key + L and dismiss the lock screen if needed.
  2. Hold Shift and select Power, then Restart.
  3. On the Choose an option screen, select Troubleshoot, then Reset this PC.

Use a mouse or the arrow keys and Enter on a connected keyboard to move through the screens.

What your symptom means

SymptomWhat Microsoft says it meansAction
No touch on part or all of the screen, pen will not ink, mouse and keyboard workLikely hardware failureSubmit a service order
Multi-touch fails or touch is inaccurate, single touch worksLikely hardware failureSubmit a service order
Ghost touches or white dotsPossible electronic interferenceMove the Surface or the nearby equipment
Slow touch or slow appsA performance issue, not the screenFollow the slow-Surface guidance
Missing touch driver or a yellow warning iconDriver or firmware problemInstall drivers from the Surface drivers page

Pen problems and turning touch off on purpose

If the pen will not ink either, the pen itself may be the problem: see Surface Pen not working or not writing.

Turning touch off deliberately also disables the Surface Pen, Surface Dial and the Windows touch keyboard.

For other Windows guides see touchscreen not working in Windows 11 and how to turn off the touchscreen.

When to get service

  • Self-repair using Microsoft’s replaceable parts and service guides.
  • Send to Microsoft: create a service order, print a shipping label and check your warranty first.
  • In-person help from an Authorized Service Provider in some regions.
  • Work or school devices: use Surface service options for Business and Education.

Sources: How to fix touch issues on your Surface touchscreen; What to try if a touchscreen doesn’t work in Windows.

Leave a Reply

Your email address will not be published. Required fields are marked *