|

How To Fix Casting Not Working On A Sony TV (2026)

When a Sony TV does not show up as a cast target, or casting starts and then fails, the cause is usually the network, the TV mode or the cast apps on the TV.

Sony has a dedicated article for a failing Google Cast feature on Google TV and Android TV models, plus a usage guide that sets out what is supported.

This guide follows those articles and puts the steps in the order Sony lists them.

Quick answer: fixes in order

StepWhat to do
1Put the phone or computer and the TV on the same network and band
2Restart the TV, the phone or computer, and the router
3Check the date and time on both devices
4Update the TV software
5Make sure Google Cast is enabled on the TV
6Clear data for the cast apps, then uninstall and reinstall their updates

Does your Sony TV support casting

Sony says Google Cast works on Google TV and Android TV models, from an Android phone or tablet, an iPhone or iPad, or a computer.

Other BRAVIA TVs do not support it.

TV typeAndroid mobileiPhone or iPadComputer
Google TVSupportedSupportedSupported
Android TVSupportedSupportedSupported
Other TVsNot supportedNot supportedNot supported

Sony lists minimum versions of Android 2.3 and iOS 7.0 for the casting device.

Symptoms Sony says this covers

Sony’s regional troubleshooting article lists four ways the problem shows up.

  • The TV is not detected as a Chromecast built-in device.
  • The Cast icon does not appear on the phone.
  • The Cast icon appears and the TV is found, but casting fails.
  • The error There was a problem connecting to your TV model name appears.

The same list of steps applies to all four, so work through them in order and test after each one.

If there is no shared home network

Sony’s usage guide says the TV and the casting device must be on the same Wi-Fi network.

If you do not have a home network, Sony says to use an alternative casting method instead, and it points to separate articles for mobile devices and for computers.

In practice, that means a phone on mobile data cannot see the TV.

Check that the TV is not in Basic TV mode

Sony warns that on Google TV, casting does not work when the TV is set up in Basic TV mode.

Basic TV mode means you are not signed in to a Google account on the TV.

If that applies, sign in to a Google account on the TV before trying anything else.

Put both devices on the same network

The casting device and the TV must be on the same network.

With a dual-band router, both devices must use the same frequency band.

Both must also connect to the same router, because a range extender with a different network name can stop the phone from finding the TV.

If the TV cannot get online at all, read Sony TV won’t connect to Wi-Fi.

Restart the TV, the phone and the router

Sony asks you to test casting after each restart.

  1. Restart the TV by holding POWER on the remote until Power off appears or a menu lets you choose Restart.
  2. Or open Quick Settings, then Settings, then System, then Restart, and confirm.
  3. Turn off the phone or computer, wait one to two minutes, then turn it on.
  4. Unplug the router, wait one to two minutes, then reconnect it.

Sony’s alternative power reset is to turn the TV off and unplug it for two minutes.

Check the time and update the TV

Make sure the phone and the TV both have the correct date and time.

Then install the latest TV software, using our guide to Sony Google TV software update not working if the update fails.

Sony also says to update the TV, the phone or computer, and the casting app to their latest versions.

Make sure Google Cast is enabled

A disabled cast app on the TV hides the TV from your phone.

  1. Open Settings from Quick Settings, or press HOME and choose Settings.
  2. On Android 9 or later, go to Apps, then See all apps, then Show system apps.
  3. Choose Google Cast or Google Cast Receiver and select Enable.

On Android 8.0 or earlier, go to Apps and choose the same app directly.

Clear data for the cast apps

Sony says to clear the data of the cast function apps, Android System WebView and Google Cast.

  1. Open Settings, then Apps, then See all apps, then Show system apps.
  2. Select the app, choose Clear data, then OK.
  3. Repeat for Android System WebView and Google Cast.

Clearing data resets those apps, so you may need to set them up again.

Uninstall updates and reinstall them

If clearing data does not help, Sony says to remove the updates for Android System WebView and Chromecast built-in.

  1. Open Android System WebView in the system apps list and select Uninstall updates, then OK.
  2. Do the same for Chromecast built-in, which Sony also calls Google Cast.
  3. Restart the TV.
  4. Open the Google Play Store and update both apps to the latest versions.

If Uninstall updates is not shown for an app, Sony says to skip ahead to updating it from the Play Store.

Casting from a phone or from a computer

Once the TV is fixed, the steps for casting differ by device.

FromHow Sony says to cast
Phone or tabletOpen a Chromecast-enabled app, tap the Google Cast icon, choose your TV and tap Play
ComputerOpen Google Chrome, then More, then Cast, save and share, then Cast, and pick the TV

To show the whole phone screen instead of one app, Sony points to Google’s guide for Android and its own article for iPhone and iPad.

Sony adds that some video may not be compatible with Cast, depending on the content type.

Last resort: reset the TV

The final steps in Sony’s article are to factory reset the TV and update it to the latest software.

Our guide to resetting a Sony Google TV shows how, and a factory reset erases your accounts and apps.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *