|

How To Fix Sony Headphones Not Connecting To A Windows PC (2026)

Sony headphones that will not connect to a Windows PC usually fail at one of three points: pairing mode, the Windows sound output, or the wrong device grabbing the connection first.

This guide follows Sony’s own Help Guide for the WH-1000XM5 headphones, plus Microsoft’s Bluetooth pages for the Windows side.

Other Sony headphones have their own guides with different buttons, so check your model’s page if a step does not match.

Quick answer: find your symptom

What you seeWhat to try first
The headphones never show up in WindowsHold the power button for about 5 seconds until the blue light flashes twice, then search again
They show up but will not connectEnter 0000 if asked for a passkey, or remove the headphones from Windows and pair again
They are paired but there is no soundChoose the headphones as the output device in Windows sound settings
Calls have no microphonePick Headset (Hands-Free) for both speaker and microphone in the calling app
They keep joining your phone insteadTurn off Bluetooth on the phone that connected last

Check these basics first

Sony lists a few requirements before pairing with a computer.

  • The PC has Bluetooth that supports music playback, which Sony calls A2DP.
  • For video calls, the PC also needs Bluetooth that supports calling, listed as HFP or HSP.
  • The PC sits within 1 meter (about 3 feet) of the headphones.
  • The headphones have enough charge.
  • The built-in Bluetooth adapter of the PC is switched on.

Put the headphones in pairing mode

How you enter pairing mode depends on whether the headphones already remember another device.

SituationWhat to doWhat you should notice
First device after purchase or after a factory resetTurn the headphones onPairing mode starts by itself
Second or later deviceHold the power button for about 5 secondsThe blue indicator flashes twice in a row and the voice guidance says Pairing

Sony says pairing mode is cancelled if pairing is not completed within 5 minutes.

If that happens, turn the headphones off and start again.

Pair the headphones in Windows 11

  1. Wake the PC if it is asleep.
  2. Select Start > Settings > Bluetooth & devices.
  3. Turn on the Bluetooth switch, then select Add device.
  4. Select Bluetooth.
  5. Select your headphones, for example WH-1000XM5, from the list.

If Windows asks for a passkey, enter 0000, which Sony gives as the default.

Sony’s headphone page is written for Windows 10, but its Windows 11 page for the WF-1000XM5 earbuds uses the Bluetooth & devices path shown above.

If you see a Connect pop-up when the headphones are ready, Swift Pair is on, and selecting Connect does the same job in one click.

Our guide to turning on Bluetooth and pairing a device in Windows 11 covers the Windows side in more detail.

Reconnect a PC that was paired before

Once paired, the headphones normally reconnect on their own, but if they do not, Sony’s steps are these.

  1. Wake the PC and turn the headphones on by holding the power button for about 2 seconds.
  2. Right-click the speaker icon on the taskbar and open Sound settings.
  3. Choose the headphones as the output device.
  4. If they are listed but disconnected, select Connect from the menu.

Sony’s Windows 10 page names the entry Headphones (WH-1000XM5 Stereo) and says to turn on Show Disconnected Devices in the Sound Control Panel if it is missing.

Its Windows 11 earbuds page right-clicks the device on the Playback tab under More sound settings and selects Connect.

Connected but no sound

Sony’s no-sound page lists checks that apply to a PC.

CheckWhy it matters
Both devices are on and the headphones are linked through A2DPMusic playback needs that connection
The PC audio output is set to the Bluetooth headphonesWindows may still be playing through the speakers
The volume is not too low and the PC is actually playing audioA silent source sounds like a fault
The supplied cable, if used, is pushed in firmlyA loose cable breaks the connection
Speak-to-Chat is offSony says it can react to nearby sounds even when the headphones are not worn
The PC has been restartedSony lists a restart as a step

If none of that works, Sony’s next steps are to pair again, then reset, then initialize the headphones.

Our headphones not detected in Windows 11 guide helps when Windows does not list them at all.

No microphone or sound on calls

Sony says video calls need the calling connection, HFP or HSP, and not the music connection.

With music playback selected, video calls may not work.

Setting in the calling appChoose this
SpeakerHeadset (WH-1000XM5 Hands-Free)
MicrophoneHeadset (WH-1000XM5 Hands-Free)
Music in other appsHeadphones (WH-1000XM5 Stereo)
App that shows only one entryWH-1000XM5

If the microphone is not set, Sony warns that Speak-to-Chat can switch on whenever it hears your voice and mute the audio.

Some apps have no microphone setting, and Sony then suggests holding two fingers on the touch panel until the voice says Speak-to-chat deactivated.

Calls sounding thin is a separate problem, covered in our bad Bluetooth headset sound guide.

Headphones connect to the wrong device

Sony says the headphones may connect to the last device they used when switched on, even if you want another one.

The fix is to turn off Bluetooth on that last device or power it down, then connect from the PC.

Using the PC and a phone together

The XM5 can connect to two devices at once, but the feature must be switched on in the Sony Headphones Connect app.

  1. Pair the headphones with each device separately.
  2. Connect them to the device that has the app installed.
  3. Turn on Connect to 2 devices simultaneously in the app.
  4. Connect the second device.

Sony says playback comes from whichever device played last.

Some devices keep sending a silent signal after playback stops, so the headphones may stay with that device.

If you cannot hear the second device, Sony says to confirm the setting is on, stop playback on the first device, then close the app there.

If a third device connects, the headphones keep the one that played music most recently and drop the other.

Remove the headphones and pair again

When a paired connection will not come back, Sony and Microsoft agree on a clean re-pair.

  1. Select Start > Settings > Bluetooth & devices.
  2. Find the headphones and select More options (…) > Remove device.
  3. Put the headphones in pairing mode again.
  4. Select Add device and choose the headphones.

Microsoft also suggests turning Bluetooth off for 10 seconds, installing updates from Settings > Windows Update, and restarting the PC.

If the connection drops later, see our Bluetooth disconnecting guide.

Reset or initialize the headphones

ActionSteps for the WH-1000XM5What it does
ResetPlug in the USB Type-C cable, then press the power and NC/AMB buttons togetherKeeps pairing information and settings
InitializeTurn off the headphones and unplug the cable, then hold power and NC/AMB for about 7 seconds until the blue light blinks four timesRestores factory settings and deletes all pairing information

After initializing, remove the headphones from Windows and pair them again.

If they still misbehave, Sony says to contact your nearest Sony dealer.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *