How To Change When The Screen Turns Off In Windows 11 (2026)
Short answer: go to Start > Settings > System > Power & battery > Screen, sleep, & hibernate timeouts, then pick a time next to “Turn my screen off after.”
The same page has a separate “Make my device sleep after” setting.
These steps come from Microsoft’s support pages for Windows 11.
Change when the screen turns off
It takes four steps.
- Open Start > Settings > System > Power & battery.
- Expand Screen, sleep, & hibernate timeouts.
- Next to Turn my screen off after, choose a time.
- Next to Make my device sleep after, choose a time if you want to change sleep too.
Source: Microsoft Support: Power settings in Windows 11.
What each setting does
| Setting | What it does |
|---|---|
| Turn my screen off after | How long the device waits before it turns the screen off when you are not using it |
| Make my device sleep after | How long the device waits before it goes to sleep when you are not using it |
Microsoft says each setting applies both when the device is plugged in and when it runs on battery.
Screen off versus sleep
Turning the screen off only blanks the display.
Sleep is a separate state that uses very little power and lets you resume quickly where you left off.
Microsoft says Windows saves your work during sleep and shuts the PC off if the battery gets too low.
Sleep is meant for short breaks.
Default times Microsoft lists
Microsoft lowered the default times to cut idle energy use.
The page splits devices into two groups, modern standby and S3, and gives the time in minutes for each.
Modern standby devices
| Setting | Original | New default |
|---|---|---|
| On battery, turn my screen off after | 4 | 3 |
| Plugged in, turn my screen off after | 10 | 5 |
| On battery, make my device sleep after | 4 | 3 |
| Plugged in, make my device sleep after | 10 | 5 |
S3 devices
| Setting | Original | New default |
|---|---|---|
| On battery, turn my screen off after | 5 | 3 |
| Plugged in, turn my screen off after | 10 | 5 |
| On battery, make my device sleep after | 15 | 10 |
| Plugged in, make my device sleep after | 30 | 15 |
The page does not explain how to tell which group your PC belongs to, so use the times shown on your own screen.
Put the PC to sleep or hibernate yourself
Microsoft’s shut down, sleep or hibernate page describes three states.
| State | What Microsoft says |
|---|---|
| Shut down | Fully powers off the PC; the next start is a full boot |
| Sleep | Uses very little power and resumes quickly |
| Hibernate | Uses less power than Sleep but resumes more slowly; meant for a laptop or tablet you will not use for a long time and cannot charge |
To sleep manually, press the power button or close the laptop lid, if those are set to Sleep.
To hibernate, select Start, then Power, then Hibernate.
Hibernate may not be available on every PC, and Microsoft says PCs with InstantGo do not offer it.
If the option is missing, see How To Fix A Missing Hibernate Option In Windows 11.
Choose what the buttons and lid do
Microsoft’s older Control Panel route sets what the power button and lid do.
- Search for control panel on the taskbar and open it.
- Select System and Security.
- Under Power Options, select Choose what the power buttons do.
- Select Change settings that are currently unavailable.
- Under When I close the lid or When I press the power button, choose Sleep for On battery and Plugged in.
- Select Save changes.
For a Windows 11 walkthrough of the lid action, see How To Change What Closing The Lid Does In Windows 11.
Wake the PC
On most PCs, press the power button to wake it.
Some PCs also wake from a key press, a mouse click or opening the laptop lid.
Microsoft says to check your PC’s documentation or the maker’s website for your model.
If the PC wakes when you did not ask it to, see How To Fix Windows 11 PC Waking Up From Sleep By Itself.
Other settings on the same page
| Setting | Where | What Microsoft says |
|---|---|---|
| Power mode | Settings > System > Power & battery > Power mode | Best Power Efficiency limits background activity |
| Energy saver | Settings > System > Power & battery > Energy saver | Turns on when the battery is low, dims the screen and limits background processes |
| Dark mode | Settings > Personalization > Colors > Choose your mode | Dark can reduce screen power use, especially on OLED displays |
| Dynamic refresh rate | Settings > System > Display > Advanced display | Lowers the refresh rate during static tasks when turned on |
Energy saver has its own option, Lower screen brightness when using energy saver.
Related guides: How To Turn On Energy Saver In Windows 11 and How To Change The Refresh Rate In Windows 11.
If devices stop working after sleep
Microsoft says that if a monitor, printer or scanner does not work after Sleep or Hibernate, you should disconnect and reconnect it, or restart the PC.
It also says to make sure all device drivers are up to date.
Quick checklist
- Open Settings > System > Power & battery.
- Expand Screen, sleep, & hibernate timeouts.
- Set Turn my screen off after.
- Set Make my device sleep after.
- Remember that each setting applies plugged in and on battery.
For help beyond these steps, see Microsoft Support: Shut down, sleep, or hibernate your PC.