How To Stop Too Many Motion Alerts On A Ring Doorbell (2026)

A Ring doorbell that pings your phone for every passing car, swaying branch or neighborhood cat is usually set to watch more area than you need.

Ring gives you several settings to narrow what counts as motion, and a few of them work together.

This guide covers each one with the app path, so you can cut the noise without missing the visitors you care about.

Quick answer: which setting cuts which alerts

Ring suggests starting with Motion Zones and Smart Alerts, since those two changes solve most false alerts.

SettingWhat it doesWhere to find it
Motion ZonesLimits detection to the areas you drawMotion Settings
Motion SensitivityShortens how far the device detects motionMotion Settings
Smart AlertsNotifies you only for the types you pick, such as peopleMotion Settings
Motion SchedulesPauses alerts during set timesMotion Settings
Motion FrequencyAdds a pause after each alert on battery devicesAdvanced Settings
PlacementRemoves the source of the triggersPhysical position

Find out what is setting off the alerts

Ring lists the usual triggers as passing vehicles, moving trees, bushes or flags, shifting shadows, animals such as squirrels, birds or pets, and rain or other weather.

Open Event History in the Ring app to see when the unwanted events happened.

Then open Live View to see exactly what the device sees before you change anything.

Draw tighter Motion Zones

  1. Open the Ring app, tap the menu (☰), then Devices.
  2. Select your doorbell or camera and tap Motion Settings.
  3. Open Motion Zones and add or edit a zone.
  4. Drag the corners so the zone covers your door or driveway.
  5. Tap Save.

Pull the zone back so it ends before the street or sidewalk, which Ring says cuts traffic alerts.

Ring also lets you exclude areas such as roads, flags and wind chimes.

Some devices offer Bird’s Eye Zones, which Ring says give more precise detection up to 30 feet away, and you can adjust or disable them in the same menu.

Lower Motion Sensitivity

The sensitivity slider controls how far the device looks for motion, and the maximum varies by device.

Go to Motion Settings, drag the slider down and save.

Lower it one or two notches at a time and watch your alerts for a day or two before adjusting again.

Ring says to raise it again if you start missing real events.

Let the Motion Wizard suggest settings

The Motion Wizard walks you through the settings above.

Open Motion Settings and tap the magic wand icon in the top-right corner.

Use it if you would rather answer questions than adjust sliders yourself.

Turn on Smart Alerts for people only

Smart Alerts need a compatible Ring subscription.

  1. Open Devices, choose your device and tap Motion Settings.
  2. Tap Smart Alerts, then Enable Feature and Continue.
  3. Choose your preferences for Person, Vehicle and Other Motion, then tap Done.

Ring’s tip is to enable Person alerts only, which cuts animal, weather and general movement alerts.

The device still records all motion, and you are notified only for the types you selected.

Alert typeWhat Ring says
PersonNotifies you when a person is detected near the device
VehicleAlerts when a vehicle enters your Motion or Bird’s Eye Zones; only on a specific list of models
PackageAlerts when a package is placed in your Package Zone; on all doorbells except the Peephole Cam models
Other MotionConfigurable alongside Person and Vehicle

For best package accuracy Ring says Motion Sensitivity must be at its highest, which may reduce battery life and add notifications.

Turn on Advanced Motion Detection on battery devices

On battery-powered devices Ring says Advanced Motion Detection may be needed for the most accurate detection.

Open Devices, choose the device, tap Advanced Settings, then switch Advanced Motion Detection on.

Motion Detection itself must be switched on for the device, or no motion events are recorded at all.

Better accuracy means fewer events caused by things that are not really people or vehicles.

Tune package alerts

Package alerts have their own zone and sensitivity.

Open Smart Alerts, tap Customize under Package, adjust the Package Zone and Package Sensitivity, then tap Save.

Ring says package detection works best with medium to large boxes, and envelopes, tubes, small boxes and food deliveries might not be detected.

Pause alerts with a Motion Schedule

A schedule is useful for predictable noise, such as weekday mornings when children leave for school or garbage trucks are running.

Open Motion Settings, add a schedule, set the days and time range, and save.

Ring says the device keeps recording during the window while push notifications are paused until it ends.

Ring’s blog says Motion Schedules also need a compatible Ring subscription.

Delete old schedules if alerts seem to be missing, because they can switch detection off.

Change Motion Frequency on battery doorbells

Motion Frequency appears only on battery-powered devices, under Advanced Settings.

OptionBattery lifeBehavior
FrequentlyShortestDetection is always active
RegularlyMediumPauses briefly after each alert
PeriodicallyLongestPauses longer after each alert

Choose Regularly or Periodically if you get too many alerts, and Frequently if you miss events.

For more ways to save charge, see our guide to Ring doorbell battery drain.

Fix the placement

Settings cannot fully fix a device that points at a busy road.

  • Aim the device at your property rather than the street.
  • Keep trees and flags out of the motion area when you can.
  • Avoid bright light sources such as streetlights or direct sun.
  • Mount outdoor cameras 9 to 12 feet high, angled slightly down.

What to try, in order

Change one setting at a time so you can tell which one worked.

StepChangeCheck after
1Redraw Motion Zones away from the streetA day of normal traffic
2Turn on Person alerts in Smart AlertsAnimal and weather alerts
3Lower Motion Sensitivity by one or two notchesA day or two of alerts
4Add a Motion Schedule for busy timesThose hours specifically
5Re-aim the deviceLive View and Event History

If you start missing real events

Tightening too far can hide real visitors, so check Event History after each change.

If a recording exists but no alert arrived, make sure Motion Alerts are on for the device.

If the device records nothing at all, use our guide to Ring doorbell not recording motion.

If another Ring camera is setting off this doorbell’s alerts, read how to stop motion alerts from linked cameras.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *