How To Fix Blink Camera Not Sending Motion Alerts (2026)
If your Blink camera records clips but your phone never buzzes, the problem is usually a setting rather than a faulty camera.
Notifications only work when the system is armed, motion detection is on, and the phone is allowed to show alerts.
This guide follows the order Blink lists on its own support page, from the quick switches to the phone-side checks.
Quick answer: why Blink motion alerts do not arrive
| Check | What to look for | Fix |
|---|---|---|
| System status | The system is disarmed | Arm the system, because alerts need an armed system |
| Motion Detection | The camera has motion detection turned off | Tap More (…) on the thumbnail, then tap Motion Detection |
| Snooze | A Snooze icon sits beside More and Motion Detection | Turn snooze off; clips still record while it is on |
| Phone | Silent mode, Do Not Disturb or a battery saver is on | Turn them off and check Blink notification permissions |
| Connection | Slow or weak network | Make sure upload speed is at least 2 Mbps |
Step 1: Arm the system and test with real movement
Blink says notifications require an armed system, so a disarmed system records nothing and alerts nobody.
After arming, make a significant movement in front of the camera and wait for the alert.
Blink notes that slow network speeds can delay notifications, so give it a moment before you assume it failed.
Step 2: Make sure Motion Detection is on
Motion detection is set per camera, so one camera can alert while another stays silent.
- On the Home screen, find the camera thumbnail.
- Tap More (…) to see whether Motion Detection is on.
- If it is off, tap the Motion Detection button.
You can also check Device Settings, then Motion Settings, for the same switch.
Step 3: Look for the Snooze icon
If a Snooze icon appears beside More and Motion Detection, notifications for that camera are paused.
Blink says clips still record and save while snooze is on, so open the Clips tab to see what you missed.
Step 4: Sign out and back in
Blink suggests signing out of the app, signing back in, and then repeating the arming and motion detection checks.
This refreshes the link between your account and the phone, which is a common reason alerts stop after a phone change.
Step 5: Check the phone itself
Blink lists several phone-side causes that have nothing to do with the camera.
- Make sure the phone is not on mute or silent.
- Turn Do Not Disturb off.
- Disable virus protection, file optimizer, ringtone or battery saver apps that conflict with Blink.
- Check the system and app notification settings for Blink.
- Update the Blink app and confirm the phone meets the minimum operating system requirements.
If that does not help, restart the phone, or delete and reinstall the app, which does not affect your cameras or systems.
Blink also says renaming your phone can help alerts reach the device on both iOS and Android.
What Early Notification and Retrigger Time change
| Setting | What it does | Where to find it |
|---|---|---|
| Early Notification | Sends the alert when motion is detected instead of after the clip is recorded; on by default | More (…), Device Settings, Motion Settings |
| Retrigger Time | Sets the wait between the end of one clip and the start of the next event; default is 30 seconds, adjustable from 10 to 60 | More (…), Device Settings, Motion Settings, then Save |
Blink says Early Notification cannot be turned off on the Mini 2, Outdoor 4, Wired Floodlight Camera and Video Doorbell.
A long retrigger time means fewer alerts, so shorten it if you think events are being skipped.
Adjust motion sensitivity
| Camera type | Scale | Default |
|---|---|---|
| Most Blink cameras | 1 to 9 slider | 5 |
| Blink Outdoor 4 | 1 to 9 slider | 6 |
| Blink Mini 4K+ and Mini Pan-Tilt 2K+ | Off, Min, Medium, Max | Medium |
On the numbered scale, 6 to 9 alert on less motion over a shorter time, while 1 to 4 need more movement over a longer time.
If you miss events, raise the setting, and if you get too many alerts, lower it by two levels and test by walking in view.
Where each setting lives in the Blink app
| Setting | Path in the app |
|---|---|
| Motion Detection button | More (…) on the camera thumbnail |
| Motion Settings | More (…), Device Settings, Motion Settings |
| Early Notification | More (…), Device Settings, Motion Settings, then the toggle |
| Retrigger Time | More (…), Device Settings, Motion Settings, Retrigger time, then Save |
| Motion Sensitivity | More (…), Device Settings, Motion Settings, Motion Sensitivity, then Save |
| Signal and network | More (…), Device Settings, General Settings, Network section |
The More (…) button sits at the bottom right of each camera or doorbell thumbnail on the Home screen.
Each camera keeps its own values, so repeat the change on every camera that misses alerts.
If you get too many alerts instead
Blink lists several fixes for alerts with no visible movement.
- Move the camera away from heat or cold sources.
- Set Retrigger Time to 15 seconds.
- Avoid roads, reflections, trees and busy areas, especially outdoors.
- Use Activity Zones to block out areas with random motion.
- Move the camera closer to the router for a stronger connection.
- Power cycle by removing and reinserting the batteries or USB cable.
You can also turn on person and vehicle detection so only those events alert you.
Blink Video Doorbell and Alexa alerts
For the Video Doorbell, Blink says poor connectivity can block alerts and the connection needs at least 2 Mbps of upload speed.
If you use Alexa announcements, open the Alexa app and turn on Announcements for Doorbell Press and Motion Detection for the doorbell.
Our guide to a related symptom on another brand is in Ring doorbell not recording motion.
When the camera shows offline
If alerts stopped and the thumbnail is dimmed, the camera may have lost its connection.
Follow our steps for a Blink camera offline message first, because no alert can be sent from an offline camera.
A similar check for another brand is in Eufy camera not detecting motion.
When to contact Blink support
Blink says to contact its Technical Support if none of these steps resolve the problem.
Have your camera model and the steps you already tried ready, so the conversation starts further along.
Official pages used for this guide: Blink motion alert notifications and Blink Video Doorbell troubleshooting.