How To Move A Pixel Watch To A New Phone (2026)
You can move a Google Pixel Watch to a new phone without wiping it, as long as your old phone is still working and paired.
Google built a Transfer watch feature for this, and it keeps your data and saved settings instead of forcing a reset.
The steps below follow Google’s own Pixel Watch help page, in the order you do them.
Quick answer: which route fits your situation
| Your situation | What to do |
|---|---|
| Old phone still works, new phone ready | Use Transfer watch on the watch and in the old phone’s Pixel Watch app |
| Getting a new Pixel Watch, keeping your phone | Back up the old watch, then restore the backup during setup |
| New phone and new watch | Follow the normal Pixel Watch setup and restore a backup if you have one |
| Watch says Can’t connect | Back up, factory reset the watch, then pair again |
Before you start
Google’s upgrade page says the transfer method requires Wear OS 4 on the watch.
Google’s setup page lists what the new phone needs.
- An Android phone, since Google states the watch works with most phones running Android 10.0 or newer.
- The latest Pixel Watch app from the Google Play Store.
- A Google Account, and a Google Workspace account only if Device Management is turned off first.
- Bluetooth and location permissions turned on, plus a Wi-Fi or mobile connection.
Google’s setup page covers Android phones only and does not confirm iPhone support.
Step by step: transfer the watch to the new phone
Keep both phones and the watch close together, and start on the watch.
- On the watch, swipe down, tap Settings, tap System, then tap Transfer watch.
- On the old phone, open the Pixel Watch app, tap System, tap Transfer watch, tap Start Transfer, then tap Done.
- On the new phone, open the Pixel Watch app and follow the steps to add a new watch.
- Confirm that the pairing code matches on the watch and the new phone.
- Sign in to your Google Account if the new phone asks you to.
- Tap Done to finish the transfer.
Google says the watch unpairs from the old phone only after the transfer to the new phone succeeds.
What to expect after the transfer
Google notes that watch faces may take some time to sync after the transfer, so a different face for a few minutes is not a fault.
If your watch has an eSIM with LTE activated and enabled, it checks whether the new phone has the same number.
| New phone’s number | What the watch does |
|---|---|
| Same number as the old phone | Stays linked to that number |
| Different number | Prompts you to set up twinning with the new number |
If alerts stop reaching the watch after the move, see our guide to Pixel Watch notifications not working.
Upgrading to a new Pixel Watch instead
If it is the watch you are replacing, back up the old one first because Google says backups can take up to a few days.
- Keep the old watch on Wi-Fi and on its charger.
- On the phone, open the Pixel Watch app, tap Google, tap Backup, then tap Turn on.
- Close and reopen the app to confirm the backup finished, because it then shows the most recent backup time.
- In the Pixel Watch app, scroll up and tap Show my devices if you have paired a watch before, then tap Add watch.
- During Set up Google Pixel Watch, select the backup to restore.
- Enter the old watch’s passcode on the new watch if it had one.
- Keep the new watch on its charger and tap Ok.
Google says the restore brings back apps, data, settings, the watch face and tiles.
Starting fresh instead of restoring
Pairing normally works the same way on any phone.
- Put the watch near the phone with Bluetooth on.
- Open the Pixel Watch app if the fast pairing prompt does not appear.
- Confirm that the codes match on both screens, then tap Pair.
- Sign in with your Google Account.
- Choose Don’t restore when asked about a backup, if you want a clean start.
Google says the phone must be within 0.5 m (1.6 ft) of the watch for Fast Pair to work.
If you see Can’t connect
Google says this error usually appears in one of two situations.
- You pair the watch to the same phone it used before, after that phone was factory reset.
- You pair the watch to a phone it was paired with earlier, without first pairing it to a different phone.
Google’s fix is to back up the watch, factory reset it, pair it to the phone again, and restore the backup if you want it.
How to factory reset the watch
A reset erases all apps, settings and data on the watch, according to Google, so back up first.
| Where you reset from | Path |
|---|---|
| The watch | Settings, then Disconnect & reset, then OK |
| The Pixel Watch app | System, then Reset and unpair watch |
| Quick route to Settings | Press and hold the crown for 3 seconds |
If the watch still will not reset, Google says to clear the phone side next.
- Uninstall the Pixel Watch app.
- Open the phone’s Settings, tap Connected devices, and forget any watch devices.
- Restart the phone.
- Set up the watch again.
If pairing still fails
Google’s pairing help lists a few basic checks before you try again.
- Fully charge the watch.
- Update the watch software, the Pixel Watch app and the phone software.
- Turn on the phone’s Bluetooth and location, and make sure it is on Wi-Fi or a mobile network.
- If the watch freezes while pairing, hold the crown for 3 seconds, tap Restart and try again.
Our guides to Pixel Watch not pairing and a frozen or blank Pixel Watch screen go deeper on both problems.
After a reset, sign in with the right account
Google says to sign in with your most recent PIN or Google Account after a reset, to prevent unauthorized use.
Have your Google Account sign-in and the watch passcode ready before you reset.