|

How To Use iPhone Personal Hotspot With A Windows PC (2026)

A Windows PC can use your iPhone’s cellular connection over Wi-Fi, USB or Bluetooth.

Wi-Fi is the quickest, and USB is handy when the PC has no Wi-Fi or the wireless connection keeps dropping.

This guide gives Apple’s steps for each method, plus the fixes to try when the PC will not connect.

Quick answer

MethodWhat to do
Wi-FiTurn on Allow Others to Join on the iPhone, then pick the iPhone name in the PC’s Wi-Fi list and enter the password
USBInstall the Apple Devices app or iTunes for Windows, plug in the iPhone, tap Trust
BluetoothPair the iPhone with the PC in Bluetooth settings and confirm the code
Not connectingRestart both devices, update iOS, turn on Maximize Compatibility

What you need first

  • An iPhone with Cellular Data turned on.
  • A carrier plan that supports Personal Hotspot, which may cost extra.
  • Allow Others to Join turned on at Settings > Personal Hotspot on the iPhone.
  • For USB, the latest Apple Devices app or iTunes for Windows on the PC.

If Personal Hotspot is dimmed, Apple says to check that Cellular Data is on and that your carrier supports it.

Connect the PC over Wi-Fi

  1. Make sure Wi-Fi and Bluetooth are on for both devices and that they are near each other.
  2. On the iPhone, stay on the Personal Hotspot screen and note the Wi-Fi password, which must be at least eight ASCII characters.
  3. On the PC, click the Network icon on the taskbar to open quick settings.
  4. Click the arrow next to Manage Wi-Fi connections.
  5. Select your iPhone’s name and click Connect.
  6. Enter the hotspot password and click Next.

If the iPhone does not appear in the list, click the Refresh network list button in the lower right to scan again.

The network name is your iPhone’s device name, which you can change at Settings > General > About > Name.

Connect the PC over USB

  1. On the iPhone, turn on Allow Others to Join.
  2. Install the latest Apple Devices app or iTunes for Windows on the PC.
  3. Connect the iPhone to the PC with a USB cable.
  4. If the PC asks to allow the accessory, allow it.
  5. If the iPhone asks, tap Trust.

Apple notes that the hotspot stays active while the cable is connected, and that unplugging the cable disconnects the PC.

If the PC does not see the phone at all, read how to fix an iPhone not showing up on a Windows PC.

Connect the PC over Bluetooth

  1. On the iPhone, turn on Allow Others to Join, then go to Settings > Bluetooth and stay on that screen.
  2. On the PC, open Bluetooth settings and select your iPhone.
  3. Confirm the pairing code matches on both devices.
  4. Tap Pair on the iPhone.

Our guide to pairing a Bluetooth device in Windows 11 covers the PC side.

Which method to pick

MethodApple notes
Wi-FiNeeds Wi-Fi and Bluetooth on for both devices, near each other
USBNeeds Apple Devices or iTunes on the PC; the hotspot stays on while plugged in
BluetoothNeeds a pairing code confirmed on both devices

If the PC will not connect

  1. Confirm Allow Others to Join is on at Settings > Personal Hotspot.
  2. Restart the iPhone and the PC.
  3. Update the iPhone to the latest iOS.
  4. Update Windows, as Apple says to install the latest software updates on both devices.
  5. On an iPhone 12 or later, turn on Maximize Compatibility at Settings > Personal Hotspot.

Apple warns that Maximize Compatibility may reduce internet performance and Wi-Fi security for connected devices.

Windows-side Wi-Fi fixes from Microsoft

  1. Open Settings > Network & internet and confirm Airplane mode is off.
  2. Run the automated Network and Internet troubleshooter from the Get Help app.
  3. Go to Settings > Network & internet > Wi-Fi > Manage known networks, select the iPhone network and click Forget.
  4. Select the iPhone network again and enter the password to reconnect.

Symptom and fix

SymptomWhat to try
iPhone name not in the Wi-Fi listStay on the Personal Hotspot screen, turn PC Wi-Fi off and on, click Refresh network list
Password errorCheck the password at Settings > Personal Hotspot on the iPhone
Personal Hotspot is dimmedTurn on Cellular Data and check that your carrier supports hotspot
USB does not connectInstall Apple Devices or iTunes, trust the computer, reconnect the cable
Connects but pages will not loadForget the network and reconnect, then restart both devices
Worked before, now failsUpdate iOS and Windows, then try Maximize Compatibility

Password error on the PC

For a password error, check the password shown on the iPhone at Settings > Personal Hotspot.

To change it, open Settings > Cellular > Personal Hotspot, tap the Wi-Fi password and enter a new one.

Reset the network on either device

On the iPhone, Apple says to go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings.

That also erases saved Wi-Fi networks and passwords, cellular settings and earlier VPN and APN settings, so see how to reset network settings on iPhone first.

On the PC, Microsoft’s steps are to open Settings > Network & internet > Wi-Fi > Manage known networks, select the network, click Forget, then connect again with the password.

A full Windows network reset is the last resort, and our Windows 11 network reset guide explains it.

Limits to know about

  • Some features that need Wi-Fi may not work over the hotspot, such as iCloud backups or photo uploads.
  • Device limits depend on your carrier and iPhone model.
  • A computer may reconnect whenever the iPhone charges over USB, so turn Personal Hotspot off when you do not need it.

Disconnect the PC

  • Wi-Fi: connect the PC to another network, or turn off Allow Others to Join.
  • USB: unplug the cable, and turn off Allow Others to Join to stop sharing.
  • Bluetooth: disconnect the iPhone in the PC’s Bluetooth settings, or turn off Allow Others to Join.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *