How To Use A Mouse Or Trackpad With Your iPad (2026)
An iPad works with a mouse or trackpad, and a round pointer appears on the screen as soon as one is connected.
Most of the setup happens in the Bluetooth settings, and the pointer, scrolling and click options sit in a few other places.
This guide follows Apple’s support pages for pairing, gestures, settings and the onscreen keyboard.
Quick answer: connect a mouse or trackpad to an iPad
Apple lists a short path for a Bluetooth device and a separate route for a wired one.
| Device | What to do |
|---|---|
| Bluetooth mouse or trackpad | Put it in pairing mode, open Settings > Bluetooth, then tap its name under Other Devices |
| Magic Mouse or Magic Trackpad | Turn it on, then pair it from Settings > Bluetooth and enter 0000 if asked for a code |
| USB mouse | Connect it with the right cable or adapter and follow the instructions from its maker |
| Pointer looks wrong or too slow | Check Settings > General > Trackpad & Mouse and Settings > Accessibility > Pointer Control |
What your iPad needs
Apple says the iPad must run iPadOS 13.4 or later to use a Bluetooth mouse or trackpad.
Apple lists iPad Pro (all models), iPad Air 2 or later, iPad (5th generation) or later and iPad mini 4 or later.
Apple adds that mice are sold separately and that not every mouse works fully with every iPad model.
Pair a Bluetooth mouse or trackpad
- Turn the accessory on and place it near the iPad.
- Put it in pairing or discovery mode if it is not a Magic Mouse or Magic Trackpad, because Apple says those are ready to pair as soon as they are on.
- Open Settings and tap Bluetooth.
- Make sure Bluetooth is on.
- Under Other Devices, tap the name of the mouse or trackpad.
- If an Apple Magic Mouse or Magic Trackpad asks for a code, enter 0000 and tap Pair.
If a third-party accessory was last used with another device, follow the steps from its maker for putting it back in pairing mode.
If the mouse is already paired with another device
A mouse that is still connected to another device will not show up for the iPad.
Apple says to unpair it from that device first, using the route for that device.
| Where it is paired | How to remove it |
|---|---|
| iPhone or iPad | Use the Unpair a Bluetooth accessory steps in the Apple Bluetooth accessories guide |
| Mac with macOS 13 or later | Apple menu > System Settings > Bluetooth, Control-click the device, then choose Forget |
| Mac with macOS 12.5 or earlier | Apple menu > System Preferences > Bluetooth, Control-click the device, then click Remove |
Once it is free, repeat the pairing steps above on the iPad.
Connect a USB mouse
Apple says many third-party USB mice and USB receiver mice can connect to an iPad with the right cable or adapter.
For AssistiveTouch, Apple says a wired mouse, trackpad or eye-tracking device can use a Lightning or USB-C port, and USB-A devices need an adapter.
Reconnect, disconnect or forget a mouse
After the first pairing, the accessory appears under My Devices in Settings > Bluetooth.
- To reconnect a disconnected accessory, tap its name in the list.
- To disconnect or forget it, tap the information button (i) next to its name.
- If the mouse switched off or moved out of range, turn it back on or bring it close, then click the mouse.
Apple gives the Bluetooth range as about 33 feet (10 meters).
Mouse actions on iPad
Hovering over a toolbar button changes its color, and Home Screen icons enlarge when the pointer is on them.
| To do this | Use the mouse like this |
|---|---|
| Click and hold | Press and hold the mouse |
| Drag | Click and hold an item, then move the mouse |
| Wake the iPad | Click the mouse, or press any key on an external keyboard |
| Open the Dock | Move the pointer to the bottom of the screen |
| Go Home | Move the pointer to the bottom, wait for the Dock, then move past the bottom edge |
| View Slide Over | Move the pointer past the right edge, and again to hide it |
| Open Control Center | Click the status icons at the top right, or move past the top-right corner |
| Open Notification Center | Click the status icons at the top left, or move past the top edge near the middle |
On an iPad with Face ID, Apple also says you can click the bar at the bottom of the screen to go Home.
Magic Mouse 2 gestures
The Magic Mouse 2 adds finger gestures on its surface.
| Gesture | Result |
|---|---|
| Slide a finger up or down | Scroll up or down |
| Slide a finger left or right | Scroll left or right |
| Swipe right on the surface | Open Today View from the Home Screen or Lock Screen |
| Swipe down on the surface | Open search from the Home Screen |
Apple notes that iPadOS does not support scrolling or other gestures with the first-generation Magic Mouse or Magic Trackpad.
Trackpad gestures
Apple lists these for the Magic Trackpad 2, the trackpad on the Magic Keyboard and the Magic Keyboard Folio.
| Gesture | Result |
|---|---|
| Two fingers up, down, left or right | Scroll |
| Pinch two fingers open or closed | Zoom in or out |
| Swipe up with three fingers | Go to the Home Screen |
| Swipe up with three fingers and pause, or pinch four fingers together and pause | Open the App Switcher |
| Swipe left or right with three fingers | Switch between open apps |
| Swipe down with two fingers on the Home Screen | Open search |
| Click with two fingers | Secondary click |
The basic click, drag and edge moves from the mouse table also work on a trackpad.
Change tracking speed and scrolling
The trackpad and the mouse each have their own settings screen.
| Device | Where to find it | What you can change |
|---|---|---|
| Trackpad | Settings > General > Trackpad | Tracking Speed, Natural Scrolling, Tap to Click, Two Finger Secondary Click |
| Mouse | Settings > General > Trackpad & Mouse | Tracking Speed, Natural Scrolling, Secondary Click on the left or right side or off |
Natural Scrolling makes content move in the same direction as your finger.
A secondary click works like a long press on the touchscreen, and Apple says you can also hold Control while clicking with any pointing device.
Make the pointer easier to see
Apple puts the pointer appearance options in the accessibility settings.
Open Settings > Accessibility > Pointer Control to change them.
- Increase Contrast makes the pointer darker and less transparent.
- Automatically Hide Pointer sets how long it stays visible when still.
- Color changes the pointer color.
- Pointer Size uses a slider.
- Pointer Animations can be turned on or off.
- Scrolling Speed sets how quickly pages scroll.
The pointer hides after a few seconds without movement, and moving the mouse or touching the trackpad brings it back.
Bring back the onscreen keyboard
The software keyboard may not appear while a mouse or trackpad is connected.
- Tap the keyboard button in the lower-right corner of the screen.
- Tap the show keyboard button in the menu.
- To hide it again, tap the dismiss button.
If typing is the problem, our guide to an iPad keyboard that is not working covers the physical keyboard side.
The Wi-Fi and Bluetooth connectivity alert
You may see the message “Using this accessory may affect Wi-Fi and Bluetooth connectivity.”
Apple says interference is more likely on some iPad models and when more Bluetooth accessories are active at once.
To reduce it, go to Settings > Bluetooth, tap the information button next to an accessory you are not using, and tap Disconnect.
If a device will not pair at all, see our guide to iPad Bluetooth accessories that will not connect.
Use a pointer device with AssistiveTouch
Apple has a separate setup for people who use AssistiveTouch with a pointer device.
| Task | Path |
|---|---|
| Pair a Bluetooth device | Settings > Accessibility > Touch > AssistiveTouch > Devices > Bluetooth Devices |
| Control the pointer from a keyboard | Settings > Accessibility > Touch > AssistiveTouch > Mouse Keys |
Our guide to turning AssistiveTouch off helps if the floating button appears when you do not want it.