The OontZ Angle 3 does not charge problem can be caused by different factors. Its battery might not be fully charged, there might be a glitch in the setting, or this might be caused by a hardware problem. To fix this you need to perform a series of troubleshooting steps.
The OontZ Angle 3 is one of the best selling portable Bluetooth speakers that’s available in the market today. It provides a great sounding experience at a fraction of the cost of other high end models. Some of its great features include an IPX5 rating allowing it to be weatherproof, a 14 hour battery life, and distortion free music even at maximum volume just to name a few.
Technical Specifications of OontZ Angle 3:
- Crystal Clear Distortion-Free Sound
- Hands Free Personal Speaker Phone
- Connects quickly over Bluetooth to your iPhone, Smartphone, and Tablet
- 10 watts of peak output power
- IPX5 Certified Water Resistant
- Just over 9 ounces
- 5.25 Inches long 2.6 inches high and 2.8 inches wide
- Plays up to 14 hours on a full charge
- Built in mic
What to do when your OontZ Angle 3 won’t charge
A problem that you might experience with your Bluetooth speaker is when it does not charge. This can be a frustrating experience as you won’t be able to use the device at all when the battery power runs out. Here’s what you need to do to fix this problem.
Method 1: Perform a factory reset on the OontZ Angle 3
The factory reset is done to wipe out data on the Bluetooth speaker and bring it back to its default settings. This is a useful troubleshooting step to do when you are experiencing problems with the device such as when you can’t make a Bluetooth connection or when there are charging issues.
Time needed: 2 minutes.
Reset the speaker
- Remove the Micro USB charging cable and 3.5mm Audio Cable, if connected.
This ensures that the device will not be charging.
- Press and hold down the Power Button and + button for a second, then release.
This will reset the speaker to its default factory settings.
- Turn on the device.
You can do this by pressing on the power button.
After performing these steps try checking if the device will charge.
Method 2: Dirt present in the speaker charging port
There’s a greater chance of sand and dirt getting stuck in the speaker charging port if it is constantly being used outdoors. This will prevent the speaker from being charged when you connect it to your charger. Try to inspect the charging port of the speaker and if you find any dirt or debris then clean this off using a toothpick or simply by blowing to it until it gets removed.
Method 3: Replace the charging cable to fix Angle 3 does not charge issue
If the charging cord you are using is damaged then it will prevent the speaker from being charged. Some of the reasons why a charging cord will not work anymore are due to it being bent constantly causing a wire to be cut or presence of dirt on its USB port.
To check if this is what’s causing the problem try using a different USB cord to charge the speaker. You can use the cord of your Android phone if it uses a Micro USB type cord. If the device charges then you will need to replace the old charging cord.
Method 4: Replace the charger
If the charging brick you are using is defective then it won’t be able to charge the Bluetooth speaker. Some of the reasons why a charger won’t work is if its USB port is damaged or if it has a faulty internal board. Try using the charging brick of your Android phone to charge the speaker then check if the issue gets fixed.
Method 5: Faulty battery
One reason why the speaker won’t charge is if it already has a defective battery. A battery will get damaged if it is overcharged most of the time or if it is constantly exposed to heat. If this is the case then replacing the battery will fix this. It’s recommended that you have this done at a service center.
Method 6: Faulty circuit board
There’s a possibility that the problem is caused by a defective speaker circuit board. This can happen if water gets inside the speaker or if some electronic component fails to work. If this is what’s causing the problem then you will need to have this fixed at a service center.
Having the OontZ Angle 3 does not charge problem can be a frustrating experience. Hopefully, this solution will help you fix the issue.
Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.