How To Fix LG G7 Fit Screen Flickering Issue

The #LG #G7Fit is a midrange version of the premium G7 device that uses an older generation Snapdragon 821 processor paired with 4GB of RAM. It’s aimed at consumers looking for a more budget friendly device that looks and feels like the flagship G7 phone. This model uses a 6.1 inch IPS LCD display at a resolution of 1440 x 3120 pixels. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the G7 Fit screen flickering issue.

If you own a LG G7 Fit or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.

How To Fix LG G7 Fit Screen Flickering Issue

Before performing any troubleshooting steps on this phone it’s best to make sure that it is running on the latest software version first. If an update is available then I suggest that you download and install it first.

Perform a soft reset

The first thing you will need to do in this case is to refresh the phone software which can be done by a soft reset. To perform this procedure just press and hold the Power button and Volume Down until the device powers off, approximately 8 seconds, then release. Once this is done check if the screen still flickers.

Start the phone in Safe Mode

There are cases when an app you downloaded will cause issues on the phone when they are installed. To check if an app you downloaded is causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.

  • With the screen on, press and hold the Power key.
  • In the options menu that displays, tap Power off and restart.
  • The device will restart and the Safe mode overlay will no longer show on the screen.

In case the issue does not occur in this mode then it is most likely caused by an app you installed. Find out what app this is and uninstall it.

Wipe the cache partition of the phone

Sometimes the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.

  • From the Home screen, tap Settings.
  • Tap the ‘General’ tab.
  • Tap Storage > Internal storage.
  • Wait for menu options to finish calculating.
  • Tap Free up space.
  • Tap Temporary files & raw files.
  • Select the following options: Cached data, Clip tray temporary files, Raw files from camera.
  • Tap Delete > DELETE

Check if the issue still occurs.

Perform a factory reset

In case the above steps fails to fix the problem then your last option is to do a factory reset. Make sure to backup your phone data before doing the reset as this will be deleted in the process.

  • Turn off the device.
  • Press and hold the Power and Volume down buttons.
  • When the LG logo appears, quickly release and then re-hold the Power button while continuing to hold the Volume down button.
  • When the ‘Delete all user data (including LG and carrier apps) and reset all settings’ message appears, use the Volume down button to highlight Yes.
  • Press the Power button to reset the device.

Once the reset is complete setup your phone again, but don’t install any apps yet,  then check if the screen still flickers. If it does then this is most likely caused by a faulty hardware component in which case you will need to bring the phone to a service center and have it checked.