The #LG #Aristo2 is one of the budget friendly Android devices released in the market last year which has several good features. This phone comes in a compact size with its 5 inch IPS LCD HD display. It has a 13MP rear camera while under the hood is a Snapdragon 425 processor paired with 2GB of RAM. Although this is a solid performing device there are instances when certain issues can occur which we will be addressing today. In this latest installment of our troubleshooting series we will tackle the LG Aristo 2 screen flickering issue.
If you own a LG Aristo 2 or any other Android device for that matter then feel free to contact us using this form. We will be more than happy to assist you with any concern that you may have with your device. This is a free service we are offering with no strings attached. We however ask that when you do contact us try to be as detailed as possible so that an accurate assessment can be made and the correct solution can be given.
How To Fix LG Aristo 2 Screen Flickering
Before you troubleshoot this particular problem it’s best to make sure that the phone is running on the latest software version. If an update is available then I suggest that you download and install it first.
Perform a soft reset
Posts you might like
The first thing you will need to do in this case is to refresh the phone software which can be done by a soft reset. To perform this procedure just press and hold the Power button and Volume Down until the device powers off, approximately 8 seconds, then release. Once this is done check if the screen still flickers.
Start the phone in Safe Mode
There are cases when an app you downloaded will cause issues on the phone when they are installed. To check if an app you downloaded is causing the problem you will have to start the phone in Safe Mode as only the pre-installed apps are allowed to run in this mode.
- Press and hold “Power” on the home screen
- In the Power Management pop-up, tap and hold “Power off”
- At the “Reboot to Safe Mode” prompt, tap “OK”
- Once the phone finishes rebooting, a “Safe Mode” watermark should be visible in the lower area of the home screen
In case the LG Aristo 2 screen flickering issue does not occur in this mode then it is most likely caused by an app you installed. Find out what app this is and uninstall it.
To find the specific app you will need to do a trial and error method. Uninstall one app then check if the issue still occurs. Repeat this step until the problem does not occur anymore after uninstalling an app. That app is most likely the culprit.
Wipe the cache partition of the phone
Sometimes the cached data stored in the dedicated partition of the phone can become corrupted. When this happens this this will usually cause certain issues to occur on the phone. To eliminate the possibility that this is what’s causing the problem you will have to wipe the cache partition of the phone from the recovery mode.
- Open “Settings”
- Go to “Phone Management”
- Tap “Storage” – “Internal storage”
- After the phone finishes calculating the data, tap “Cached data” – “Clear”
Check if the screen flickering issue still occurs.
Perform a factory reset
In case the above steps fails to fix the LG Aristo 2 screen flickering problem then your last option is to do a factory reset. Make sure to backup your phone data before doing the reset as this will be deleted in the process.
- Turn off the device.
- Press and hold the Power and Volume down buttons.
- When the LG logo appears, quickly release and then re-hold the Power button while continuing to hold the Volume down button.
- When the ‘Delete all user data (including LG and carrier apps) and reset all settings’ message appears, use the Volume down button to highlight Yes.
- Press the Power button to reset the device.
Once the reset is complete setup your phone again, but don’t install any apps yet, then check if the screen still flickers. If it does then this is most likely caused by a faulty hardware component in which case you will need to bring the phone to a service center and have it checked.