How to Fix Galaxy S26 Wireless Charging Not Working After Update

Galaxy S26 Wireless Charging Not Working After Update usually points to a charging service glitch, accessory compatibility problem, case interference, or a firmware change affecting Qi charging behavior.

For related help, also see How to Fix Galaxy S26 Ultra Not Charging After Update, How to Fix Galaxy S26 Battery Draining Fast After Update, How to Fix Galaxy S26 Overheating Problems, and the Galaxy S26 hub.

Method 1: Remove the case and realign the phone

Thick cases, magnets, or poor placement can stop Qi charging completely.

1. Remove the case and any card holder.
2. Center the Galaxy S26 on the wireless charger.
3. Wait at least 20 seconds to confirm charging starts.

Method 2: Restart the Galaxy S26

A reboot can restore charging services after a buggy update install.

1. Restart the phone normally.
2. Place it back on the charger before opening apps.
3. Check whether the charging icon appears.

Method 3: Test another wireless charger and cable

The update may not be the only issue if the charging pad or adapter is weak.

1. Use a different Qi charger if available.
2. Try another wall adapter and USB cable.
3. Compare charging behavior on each setup.

Method 4: Turn off Battery Protection and test again

Some charging limits can look like wireless charging is broken.

1. Open Settings > Battery.
2. Temporarily disable battery protection or charging limits.
3. Retest wireless charging for a few minutes.

Method 5: Check for overheating warnings

The phone may pause wireless charging when temperature rises too high.

1. Let the phone cool down fully.
2. Move the charger to a cooler, ventilated area.
3. Test again without gaming or camera use.

Method 6: Update software and accessories

Samsung often fixes charging bugs in later patches.

1. Open Settings > Software update.
2. Install any available update.
3. If your charging stand has firmware support, update it too.

Method 7: Check wired charging and seek hardware service if needed

If wireless charging alone fails across multiple chargers, the coil or back hardware may need service.

1. Test wired charging with an official cable.
2. If wired charging works but wireless never starts, book Samsung diagnostics.
3. Back up important data before service.

If the problem continues after all of the steps above, visit the main Galaxy S26 page for more troubleshooting guides.