How To Turn On VRR And 120Hz For GTA 6 On PS5 And Xbox (2026)

You want to turn on VRR and 120Hz for GTA 6, and you are not sure where the options are on PS5 or Xbox.

GTA 6 launched on November 19, 2026 for PS5 and Xbox Series X|S, and launch-week talk has focused on its 30 fps target and a clip claiming VRR changes it.

This guide gives the exact menu paths, the TV requirements, and an honest look at what VRR can and cannot do in this game.

Quick answer: where to find VRR and 120Hz

ConsoleVRR setting120Hz setting
PS5Settings, Screen and Video, Video Output, VRRSettings, Screen and Video, Video Output, 120 Hz Output
Xbox Series X|SSettings, General, TV and display options, Advanced, Video modes, Allow variable refresh rateSettings, General, TV and display options, Refresh rate

What VRR and 120Hz actually are

Variable refresh rate lets the TV match its refresh to the frame rate the console is producing.

The 120Hz option lets the console send a 120Hz signal to a TV that supports it, but a game still has to render frames that fast to benefit.

TV and cable requirements

Xbox Wire says the consoles’ most advanced features require an HDMI 2.1 connection, and that on some TVs only certain ports support HDMI 2.1.

PlayStation says its 4K 120 Hz output needs a TV that claims support, current TV firmware, and a direct connection without a receiver in between.

  • Use the cable in the box or an Ultra High Speed cable rated for 4K 120Hz.
  • Plug into the HDMI port labeled for 4K 120Hz or HDMI 2.1 on your TV.
  • Update the TV firmware and enable its enhanced HDMI mode if it has one.

Turn on VRR and 120Hz on PS5

PlayStation Support places all of these options under Settings, then Screen and Video, then Video Output.

  1. Open Settings and choose Screen and Video.
  2. Select Video Output.
  3. Set VRR to on so the refresh rate can adjust for supported TVs and games.
  4. Set 120 Hz Output to on if your TV supports it.
  5. Check the Information for the Connected HDMI Device screen to see your TV’s resolution, VRR and HDR status.

Extra option: PlayStation lists Apply to Unsupported Games under VRR, which it says can stabilize frame rates in games without VRR support.

No official source says GTA 6 supports or benefits from that option, so treat it as an experiment.

Turn on VRR and 120Hz on Xbox

These paths come from Xbox Wire and a TechRadar guide, because Xbox Support pages did not load for us.

  1. Press the Xbox button and open Profile and system, then Settings.
  2. Choose General, then TV and display options.
  3. Under Resolution, open Refresh rate and pick 120Hz if your display supports it.
  4. Choose Advanced, then Video modes, and make sure Allow variable refresh rate is ticked.
  5. Open 4K TV details to see whether your TV passes the checks.

Xbox Wire adds that if you prefer VRR over 120Hz, you can set the refresh rate to 60Hz.

Turn on game mode on your TV

PlayStation says its ALLM option, in the same Video Output menu, switches a supporting TV to low-latency mode automatically.

If VRR is off, PlayStation notes that setting ALLM to Off does not fully disable it, so both settings interact.

RequirementWhy it matters
HDMI 2.1 portNeeded for 4K at 120Hz
Ultra High Speed cableCarries the 4K 120Hz signal
Direct connectionReceivers can block 120Hz
Current TV firmwareFixes VRR and 120Hz bugs on some TVs

What VRR does and does not change in GTA 6

HappyGamer reports that a widely shared clip suggests VRR on Xbox lifts the 30 fps cap.

That outlet lists the claim as unconfirmed, says Rockstar has not commented, and notes a patch could change things.

Engadget reports that Rockstar is targeting 30 fps on consoles and that there is no 60 fps performance mode at launch.

Honest read: VRR can smooth the look of dips when frame rates wobble, but no verified source shows it unlocking higher frame rates.

We also found no source confirming a 120 fps mode, so a 120Hz signal alone will not make GTA 6 run at 120 fps.

If the options are missing or the screen flickers

  • PlayStation says to turn 120 Hz Output off if your display shows video problems.
  • PlayStation also offers a Video Transfer Rate setting to lower 4K output when the screen flickers.
  • If nothing appears on screen, PlayStation says to check the cable, the HDMI port, and that Resolution is set to Automatic or 2160p.

If the game crashes or errors out, see GTA 6 error CE-108255-1 on PS5 and missing saves after a crash.

When to contact support

Contact your TV maker if the HDMI 2.1 port or VRR option is missing, and PlayStation or Xbox support if the console menus do not match these paths.

Rockstar has published no patch notes as of November 21, 2026, so treat any claimed update date as unverified.

Official sources: PlayStation video output guide, Xbox Wire TV settings, Xbox display support.

Leave a Reply

Your email address will not be published. Required fields are marked *