Free Tools To Check SD Card Speed And Capacity (2026)
A card that claims 256 GB but holds far less, or one that writes slower than its label, is easy to catch with the right free tool.
These are desktop programs you run on your own computer, and the six below cover Windows, Mac and Linux.
Quick picks: which tool should you use?
| Award | Tool | Why | Link |
|---|---|---|---|
| Best for fake capacity (Windows) | H2testw | Fills the card, then reads it back to verify | Visit site |
| Best for fake capacity (Mac or Linux) | F3 | Same write-and-verify idea for macOS and Linux | Visit site |
| Best for speed (Windows) | CrystalDiskMark | Sequential and random read and write tests | Visit site |
| Best for speed (Mac) | Blackmagic Disk Speed Test | Free app that reports write and read speeds | Visit site |
What should you do before testing an SD card?
Back up first: capacity tests fill the whole card with test data, and some can erase what is on it.
Use the card in a direct reader if you can, because faulty cables, adapters or loose connections can cause false errors in capacity tests.
If a test reports errors, retry with a different cable or port before blaming the card.
1. H2testw: best for fake capacity on Windows
H2testw is the classic counterfeit-card checker, and it works by writing data until the card is full and then comparing it back.
Specs: Free | Windows only (Windows 10 and 11 per its download page; no Mac or Linux version) | Fills the entire card, so back up first
Pros:
- Portable, with no installation needed.
- Verifies real capacity by reading back what it wrote.
- Also tests USB sticks, hard drives, SSDs and CompactFlash.
Cons:
- Version 1.4 dates from 2008.
- Format the card first, with a single partition, which erases it.
2. F3 (Fight Flash Fraud): best for Mac and Linux
F3 fills a device with pseudorandom data and checks that reading it back returns the same data.
Specs: Free | Command line; f3write and f3read run on Linux, FreeBSD, macOS and Windows via Cygwin | f3probe needs Linux
Pros:
- f3probe is the fastest test and suits large cards, because it writes only what it needs.
- f3write and f3read test a mounted card without special access.
Cons:
- Command-line only.
- f3probe is destructive and needs privileged access on an unmounted device.
3. FakeFlashTest: lightweight Windows checker
FakeFlashTest checks whether a USB drive or SD card really has the capacity it reports.
Specs: Free | Windows | Quick Size Test can overwrite files; Test Empty Space mode writes to free space
Pros:
- Small, lightweight program.
- Has both a quick test and a test of the free space.
Cons:
- Its page strongly advises a backup before either test.
- Its page gives limited detail on how the Quick Size Test works.
4. CrystalDiskMark: best for speed on Windows
CrystalDiskMark measures sequential and random read and write performance, which makes it the quickest way to compare a card against its label.
Specs: No price listed, optional donations | Windows XP through Windows 11 | Version 9.0.3 dated May 24, 2026
Pros:
- Covers sequential and random tests for read, write and mixed workloads.
- Offers Peak, Real World and Demo measurement modes.
Cons:
- Results vary with test file size, position and your card reader.
- Results are not comparable across major versions.
5. AJA System Test: best graphs for video use
AJA System Test is built for video work and shows results as graphs so you can spot dips in performance.
Specs: Download offered without sign-up | Windows and Mac (Mac version via the App Store) | Settings include video size, frame rate and file size
Pros:
- Graphs make speed trends easy to read.
- Reports in MB/sec or frames per second.
Cons:
- Aimed at video professionals, so settings can feel technical.
- The Windows version is a standalone download, while the Mac version comes from the App Store.
6. Blackmagic Disk Speed Test: simplest Mac speed check
This free Mac app writes large blocks of data to a disk and reports write and read speeds.
Specs: Free | Mac only, macOS 10.13 or later | About 16 MB
Pros:
- Free from the Mac App Store.
- Runs repeated write and read tests so you can watch performance over time.
Cons:
- Mac only.
- Reviewers ask for a way to set the number of test runs and a log file.
How do the six tools compare?
| Tool | Platform | Checks fake capacity | Measures speed |
|---|---|---|---|
| H2testw | Windows | Yes | Not listed on its download page |
| F3 | Linux, macOS, FreeBSD, Windows via Cygwin | Yes | Not listed in its docs overview |
| FakeFlashTest | Windows | Yes | No |
| CrystalDiskMark | Windows | Not its purpose | Yes |
| AJA System Test | Windows and Mac | Not its purpose | Yes |
| Blackmagic Disk Speed Test | Mac | Not its purpose | Yes |
What do SD card speed labels mean?
The numbers on the card give you a target to compare against your results.
| Video speed class | Minimum sustained write speed |
|---|---|
| V6 | 6 MB/s |
| V10 | 10 MB/s |
| V30 | 30 MB/s |
| V60 | 60 MB/s |
| V90 | 90 MB/s |
UHS Speed Class U1 matches Speed Class 10, which means a 10 MB/s minimum, according to the SD Association.
The SD Association lists U3 alongside V30 to V90 as an option for 4K video recording.
Which tool is the best choice?
For a suspected counterfeit card, run H2testw on Windows or F3 on Mac and Linux first, since only those confirm real capacity.
Once the capacity checks out, use CrystalDiskMark on Windows or Blackmagic Disk Speed Test on Mac to see if the speed matches the label.
Get H2testw Get CrystalDiskMark
Related guides
- SD Card Vs SSD: What Is Really The Difference
- How To Fix Nintendo Switch Not Detecting SD Card
- Samsung Galaxy Storage Full? Clean Junk Files Safely
Official sources: SD Association on video speed class.