How To Fix Focusrite Control No Hardware Detected (2026)
Focusrite Control can open and still say No Hardware Connected or No Hardware Detected.
The cause is usually a stopped background service, an old version of the app, or software that blocks it.
This guide follows Focusrite’s own troubleshooting article for Windows and macOS.
Quick answer: what to try first
| Step | Windows | macOS |
|---|---|---|
| 1. Confirm the computer sees the interface | Device Manager | System Report |
| 2. Update the app | Compare the version number bottom right with the Downloads page | Same check |
| 3. Restart the background server | Focusrite Control Server service | FocusriteControlServer in Activity Monitor |
| 4. Run the server by hand | ControlServer.exe as administrator | FocusriteControlServer in LoginItems |
| 5. Check third-party firewall or antivirus | Allow the Focusrite folders | Allow FocusriteControlServer |
Check your interface is supported first
Focusrite says Focusrite Control supports Scarlett 3rd Gen, Scarlett 2nd Gen 6i6, 18i8 and 18i20, and all Clarett ranges.
Several interfaces will never be detected by it, and that is not a fault.
| Interface | What to use instead |
|---|---|
| Scarlett 1st and 2nd Gen Solo, 2i2 and 2i4 | No control app is detected; these need only the driver |
| Scarlett 1st Gen 18i20, 18i8, 18i6, 8i6 and 6i6 | Scarlett Mix Control |
| Saffire interfaces | Saffire Mix Control |
| Red interfaces | RedNet Control |
The Scarlett Solo 3rd Gen and 2i2 3rd Gen are detected, but Output Routing shows the message Output routing is not supported on this device.
Their output controls are on the front panel instead.
If you own a 4th Gen Scarlett, the app is Focusrite Control 2, and Focusrite has a separate article for that one.
Windows step 1: Confirm Windows can see the interface
- Right-click Start and choose Device Manager.
- Look for the interface under Sound, Video and Game Controllers and under Focusrite Audio.
- If it is missing, try a different USB or Thunderbolt cable and a different port.
If it still does not appear, Focusrite says to contact Focusrite Support, because the problem is below the app.
Windows: Fix No Hardware Connected
Use these steps when the interface does show in Device Manager.
- Update Focusrite Control by comparing the version number at the bottom right of the app with the Downloads page or your Focusrite account.
- Check that the app is installed on the C: drive, because Focusrite says a secondary drive can cause problems.
- If you are unsure, reinstall using the default options.
- Right-click Start, open Control Panel, search for local, and choose View Local Services.
- Select Focusrite Control Server, then click Start if it is stopped or Restart if it is running.
If that does not work, run the server yourself.
- Open File Explorer, choose This PC, then Local Disk (C:).
- Open Program Files, then Focusrite, then Focusrite Control, then Server.
- Right-click ControlServer.exe and choose Run as Administrator.
Your drive letter may differ from C:.
Windows: Fix No Hardware Detected
Do the first three steps from the section above, then continue here.
- Check your firewall and antivirus, but only if you use third-party software, because Focusrite says Windows Defender does not cause this issue.
- Allow either the Focusrite Control process or the folders C:\Program Files\Focusrite and C:\Program Files\Focusrite\Server.
- Temporarily disable the security software, then rerun the Focusrite Control installer by right-clicking it and choosing Run as Administrator.
- Run ControlServer.exe manually as described above.
Remember to turn your security software back on once the interface is detected.
macOS step 1: Confirm the Mac can see the interface
- Click the Apple menu, then About This Mac, then System Report.
- Under Hardware, open USB or Thunderbolt.
- If the interface is listed, the Mac detects it at the hardware level.
If it is not listed, try another cable and port, then contact Focusrite Support.
macOS: Fix No Hardware Connected
- Update Focusrite Control and compare the version at the bottom right with the Downloads page.
- Open Focusrite Control, then open Activity Monitor from Applications, then Utilities.
- Find FocusriteControlServer, double-click it and click Quit.
- Check whether the interface now appears in Focusrite Control.
Focusrite notes the process may remain in Activity Monitor after you quit it.
If that fails, start the server manually.
- In Finder, open Applications, right-click Focusrite Control and choose Show Package Contents.
- Go to Contents, then Library, then LoginItems.
- Double-click FocusriteControlServer, then reopen Focusrite Control.
Owners of the Clarett Thunderbolt must also allow the driver to load, using a separate Focusrite article.
macOS: Fix No Hardware Detected
Complete the four steps above, then check any third-party firewall or antivirus.
The Focusrite Control Server is normally added to the firewall during installation, and Focusrite explains how to add it if it is missing.
- Open Applications, right-click Focusrite Control, choose Show Package Contents, then Contents, Library and LoginItems, and leave that window open.
- Open firewall settings: System Preferences, Network, Firewall, Options on macOS Ventura 13 and later, or System Preferences, Security and Privacy, Firewall, Firewall Options on macOS Monterey 12 and earlier.
- Drag FocusriteControlServer into the Firewall Options window and set it to allow all incoming connections.
- Drag the Focusrite Control application into the same window.
Apple Silicon Macs
Focusrite says to install the latest Focusrite Control from your product downloads page on an Apple Silicon Mac.
For a Clarett Thunderbolt, Saffire or Red interface on macOS, Focusrite adds extra steps from a linked article.
Likely causes at a glance
| Cause | Affects |
|---|---|
| Unsupported interface model | All |
| Outdated Focusrite Control | All, Apple Silicon especially |
| Installed on a secondary drive | Windows |
| Focusrite Control Server not running | Windows and macOS |
| Driver not allowed to load | macOS, Clarett Thunderbolt |
| Third-party firewall or antivirus blocking the server | Windows and macOS |
| Faulty cable or port | All |
Related guides
If Windows plays no sound through the interface, see the Windows 11 no sound guide.
To pick the interface as your microphone, see how to change the default speakers or mic.
If a USB port seems dead, the USB ports guide covers it.
When to contact Focusrite Support
Focusrite says to contact its support team if none of these steps fix the problem, or if the interface never appears in Device Manager or System Report.
Official source: Focusrite: No Hardware Connected or No Hardware Detected.