Fix UE Boom 3 Will Not Turn On Problem

The UE Boom 3 will not turn on issue can be caused by various factors. It could be due to a software glitch, a defective charger, or even a faulty circuit. To fix this you will need to perform a series of troubleshooting steps on the device.

The Boom 3 is a portable Bluetooth speaker that is able to deliver a loud 360 sound experience. It has a deep bass without sounding distorted and can even be charged wirelessly with the addition of a wireless charging dock. Some of its features include a durable fabric design, 15 hour usage time on a single charge, and IP67 waterproof rating just to name a few.

Technical specifications of Boom 3:

  • Sound: Spatial 360-Degree Sound
  • Height: 18.4cm
  • Diameter: 7.3cm
  • Weight: 608 Grams
  • Wireless: Yes
  • Pairing: Pair Up To 8 Bluetooth-Enabled Devices.
  • Pairing: Two Simultaneous Connections.
  • Bluetooth Range: 45 Meters
  • Battery Life Up To 15 Hours
  • Charge Time: Approx 2.75 hours
  • Drivers: Two 38mm (1.5-inch) Full-Range (4 ohm)
  • Passive Radiators: Two 40x80mm
  • Max Sound Level: 90 dB
  • Water & Dust Proof: Yes – IP67 Rated
  • Flotation: Floats On Water

What to do when your UE Boom 3 does not turn on

One issue that you might encounter with your UE Boom 3 Bluetooth speaker is when you are unable to turn it on. This can be an annoying issue especially if you need to use it. Here are the troubleshooting steps you need to do to fix the problem.

Method 1: Perform a factory reset on UE Boom 3

The first troubleshooting step you should consider doing is a factory reset or hard reset. This is a procedure that deletes the data stored on this Bluetooth speaker and brings it back to its default settings. This is a useful troubleshooting step to do when you are experiencing problems with the device.

Time needed: 2 minutes.

Reset the speaker

  1. Press and hold the Volume down and Power buttons.

    Do this for around 10 or until you hear a short tone.UE Boom 3 Will Not Turn On Problem

  2. Turn on the speaker.

    You can do this by pressing the power button.What to do when your UE Boom 3 does not turn on

Method 2: Charge the speaker to fix will not turn on issue

There’s a possibility that the problem is caused by the speaker battery not having enough charge. To fix this all you need to do is to charge the speaker.

  • Insert the micro USB charging cord  into the charging port of the speaker.
  • Insert the other end of the  charging cord to a USB wall charger
  • Connect the wall charger to a power outlet.

Leave the speaker charging for at least 2 hours then check if you can turn it on.

Method 3: Faulty battery

If this speaker has a faulty battery then it will not turn on. Replacing the battery will fix this however it is recommended that you have this done at a service center.

Some of the causes why a battery will fail is if it is constantly being overcharged or when it is always being exposed to heat. These factors will rapidly degrade the battery performance.

Method 4: Faulty circuit board

Even if this is a waterproof speaker there is still a possibility for water to get inside the speaker. If the circuit board of this speaker gets wet then it will get damaged which in turn will cause this problem. You will then need to have this fixed at a service center.

Having power issues on this Bluetooth speaker can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read: