How To Fix Fire TV Stick Restarting By Itself (2026)

Your Fire TV Stick keeps restarting by itself, sometimes in a loop on the Fire TV logo.

That is most often a power or connection problem, not a dead stick.

This guide goes through each cause from easiest to hardest, and it usually takes 15 to 30 minutes.

Quick answer: why a Fire TV Stick keeps restarting

What you seeLikely causeWhat to try
Stick restarts or shuts off right after it startsToo little power from the TV’s USB portUse the wall adapter and cable from the box
Restarts with an extender or extra cable fittedA faulty extender or power extensionPlug straight into the TV
Restarts mostly when warmHeat behind the TVGive it airflow and check placement
Loops on the logo after an updateAn interrupted or pending updateWait, then check for updates

Why does my Fire TV Stick keep restarting by itself?

The reasons below come from Android Police, SlashGear and Asurion, because Amazon’s own help pages could not be opened during research.

Android Police says the usual culprit is the wrong power source, since a TV’s USB port typically supplies only 0.5A.

Other causes include a damaged cable, an extender, heat, interrupted updates and software glitches.

Work through the steps in order and test after each one.

Step 1: Use the wall adapter, not the TV’s USB port

Android Police says Amazon recommends a 5.25V, 5W, 1A adapter and that you should use the one from the box.

Plug the cable into that adapter, plug the adapter into a wall outlet, and leave the TV’s USB port empty.

A stick that needs more power than the port gives can shut off immediately.

Our guide to a Fire TV Stick black screen covers a similar power symptom.

Step 2: Inspect the cable and remove extenders

Look at the cable and adapter for a cracked casing, a frayed wire or exposed electronics, and replace the part right away if you see any.

  • Power extenders: remove extra USB cables or extensions and plug the stick in directly.
  • HDMI extender: Asurion says to remove it to check whether it causes the loop, and SlashGear says the same.
  • Loose connection: unplug the stick for about two minutes, then reconnect it firmly.

If the adapter itself is broken, Android Police says to contact Amazon support with your stick’s model.

Step 3: Let a pending update finish

An interrupted background update can leave the stick restarting.

SlashGear says to wait about 25 minutes so pending updates and background tasks can finish.

Do not switch off the TV or pull the power during that time.

If it is still looping after that, move on to the next step.

Step 4: Check for heat

Asurion lists heat as a cause, and it says a power adapter lets the stick sit several inches from the TV.

Stand the stick where air can move around it instead of tucking it behind a hot panel.

Keep it away from soundbars, game consoles and anything else that radiates warmth.

I could not find an Amazon page with exact temperature limits, so treat this as a practical test, not a fixed rule.

Step 5: Change the HDMI port and unplug other HDMI devices

Android Police says other HDMI devices can interfere, so unplug them one at a time or keep them switched off.

Move the stick to a different HDMI port on the TV.

The sources reviewed do not blame HDMI-CEC for restarts, but you can test it.

On Fire TV, AFTVnews places the option under Settings, Display & Sounds, and Roku’s guide names it HDMI CEC Device Control, though the label may differ by software version.

Step 6: Check for a system update

Go to Settings, then My Fire TV, then About, and select Check for System Update.

Install anything that is pending and let the stick restart on its own.

Asurion also suggests unplugging the stick for 30 seconds or more once a month to clear its cache.

Step 7: Do a soft reset

Android Police says to hold Select and Play/Pause on the remote for five seconds.

If the remote will not respond, unplug the stick for at least 30 seconds, as Asurion suggests.

Our guide to a Firestick that keeps disconnecting from Wi-Fi helps if the restarts come with network drops.

Step 8: Test the stick on another TV

Plug the stick into a different TV, still using its own adapter.

If it stops restarting there, Android Police says the problem is probably the original TV.

If it still restarts, the stick or its power parts are the likely cause.

Step 9: Factory reset as a last resort

Warning: a factory reset deletes your apps, settings and saved Wi-Fi networks, and you must set the stick up again.

Press Home, open Settings, select My Fire TV, then Reset to Factory Defaults, and confirm, noting that Asurion lists it under About on some versions.

If the stick is frozen, Android Police says to hold Back and the right side of the navigation circle for about 10 seconds.

FixWhat it changesWhat it keeps
Unplug and replugClears a stuck stateApps and settings
Software updateInstalls the latest system filesApps and settings
Factory resetErases apps, settings, Wi-FiNothing

Can the TV USB port ever power a Fire TV Stick?

Sometimes it works, but it is the least reliable option.

Because many TV ports supply about 0.5A, a stick can restart whenever it draws more.

The wall adapter in the box avoids the problem, and these steps are current as of November 2026.

When is it a hardware fault and how do I contact Amazon?

If the stick restarts on another TV with its own adapter after a factory reset, the stick itself is likely failing.

Contact Amazon customer service with your stick’s model and ask about a replacement.

Android Police also suggests replacing an older stick with a newer streaming device.

Sources reviewed: Android Police on Fire TV restarts, Asurion Firestick restart guide, SlashGear Fire TV Stick troubleshooting, AFTVnews on HDMI CEC.

Leave a Reply

Your email address will not be published. Required fields are marked *