How To Fix DisplayLink Driver And Display Problems (2026)
DisplayLink is the chip inside many USB docks, USB monitors and USB video adapters, and it needs its own driver on Windows.
When that driver is missing, outdated or blocked, the screens on the dock stay black or the dock shows up in Device Manager with an error.
This guide follows the official DisplayLink support pages and the current driver download page.
Quick answer: what to try first
| Symptom | First thing to do |
|---|---|
| Dock or adapter shows no picture | Plug it into a different USB port and swap the USB cable |
| Message: USB device not recognized | Test other USB devices and a different port, then contact the dock maker if it persists |
| Device sits under Other devices in Device Manager | Check the Hardware Ids, then uninstall and reinstall the DisplayLink software |
| Screen blanks for about a second | Replace the video cable or use an active adapter |
| Dock keeps disconnecting | Update the driver and BIOS, then test a USB 2.0 port |
| Ethernet or audio on the dock missing | Reinstall the software and check that antivirus is not blocking it |
Check that your dock really uses DisplayLink
DisplayLink says to confirm the dock or video adapter has a DisplayLink chip before anything else.
Look for a DisplayLink logo sticker, and check the user manual or the maker’s website for DisplayLink software.
The company also splits responsibility, because it handles problems with the video outputs, the network port and the audio output.
A device plugged into one of the dock’s USB ports is a different matter, since the USB hub is designed by the dock maker and DisplayLink points those problems to the maker.
Where to get the current DisplayLink driver
The DisplayLink Windows download page, which now sits on the Synaptics website, lists USB Graphics Software for Windows 12.3 dated September 4, 2026.
It supports Windows 11 and Windows 10, and the company recommends updating to the latest driver for security fixes, bug fixes and better performance.
The page adds that some makers ship their own software for specific monitors, docks or adapters, and that it can differ from the DisplayLink release.
Basic checks before you touch the driver
DisplayLink’s first-step guide lists these checks for a dock or adapter that misbehaves.
- Plug the dock into a different USB port.
- Look at the USB up-link port for damage.
- Replace the USB cable between the dock and the computer.
- Try a USB 2.0 port or a USB 2.0 extension cable, which tests the USB 3.0 path.
- For a bus-powered adapter or monitor, use a high-power port or a mains-powered USB hub.
- Test the device on another computer to see whether the PC or the dock is at fault.
Fix USB device not recognized
DisplayLink says this message is usually a hardware fault, because the device returned a corrupt response when Windows asked what it was.
It states that this is not a DisplayLink software or driver problem.
- Confirm that other USB devices are recognized, using a good cable and a different port.
- For a bus-powered device, connect it through an externally powered USB hub.
- For a docking station, disconnect everything else from the dock and test again.
- If it persists, contact the original manufacturer, not DisplayLink, about a replacement.
Check the dock in Device Manager
- Right-click the Start button and choose Device Manager.
- Look for USB Display Adapters, or for the device under Display adapters.
- If nothing appears, expand Other devices.
- Right-click the entry, choose Properties, open the Details tab and select Hardware Ids.
A DisplayLink device shows a value in the form USB\VID_17E9&PID_XXXX, and a vendor ID other than 17E9 means the device is not DisplayLink.
If a DisplayLink device sits under Other devices, DisplayLink says to uninstall the software completely and install the latest Windows software.
A product ID of 8060 or 8080 means the device did not boot correctly, and the fix is to unplug all cables, connect power if needed, connect the USB cable and then the video cable.
If the same product ID remains, contact the original manufacturer.
Device Manager error codes on DisplayLink devices
| Error | What DisplayLink says |
|---|---|
| Code 10 | Either a faulty device or an old auto-install device; some adapters have a workaround that needs driver R8.2 or higher and Windows 10 build 15049 or higher |
| Code 43 | Check whether OBASE or Duet Display is installed and update them; otherwise update the driver after running the DisplayLink Installation Cleaner, and update the BIOS or UEFI |
| Code 31 | Antivirus or endpoint protection is blocking the UMDF driver installation |
| Network adapter missing | Antivirus is blocking creation of the network adapter, so reinstall with nothing blocking it |
Some pre-2009 devices cannot work on Windows 10 or later because they rely on an auto-install feature, and DisplayLink lists the LG L206WU, Samsung 940UX, first-generation HP USB 2.0 Dock Station and InFocus IN1100 as examples.
How to reinstall the DisplayLink software
DisplayLink gives this full reinstall procedure for Windows.
- Disconnect your device, and its power adapter if it has one.
- Uninstall the DisplayLink software from the Windows Control Panel.
- Download and run the DisplayLink End User Windows Cleaner tool.
- Restart the computer.
- Download the latest DisplayLink Windows software and install it.
- Reconnect the device when the installer asks.
- Restart the computer again.
Fix a screen that blanks or flickers
If a screen goes blank for about a second and the windows stay on it, DisplayLink says the monitor is probably losing sync.
Long or poor-quality video cables are a common reason, and converters and adapters are especially prone to it.
| Connection | What to use |
|---|---|
| DisplayPort to HDMI | Active DisplayPort-to-HDMI adapter, then an HDMI cable |
| DisplayPort to DVI | Active DisplayPort-to-DVI adapter, then a DVI cable |
| DisplayPort to VGA | Active DisplayPort-to-VGA adapter, then a VGA cable |
| HDMI to VGA | Active HDMI-to-VGA adapter, then a VGA cable |
Connect the DisplayPort or HDMI side of the adapter to the source output, not to the monitor input.
Fix a dock that keeps disconnecting
DisplayLink lists a longer set of steps for a dock that repeatedly disconnects, reconnects or freezes.
- Install the latest DisplayLink software.
- Update the PC BIOS and check that USB 3.0 mode is enabled if the BIOS has that option.
- Test a USB 2.0 port, because some PCs have trouble on USB 3.0 ports only.
- Try another cable or port, and use a powered hub if needed.
- In Power Options, open Change advanced power settings, then USB settings, then USB selective suspend, and set it to Disabled.
- Install dock firmware from the dock maker, such as the Dell Universal Dock D6000 or HP USB-C/A Universal Dock G2 pages.
Fix missing Ethernet or audio on the dock
- Open Device Manager and expand Network adapters, or Sound, video and game controllers.
- If the entry is missing, check Other devices.
- Right-click the entry and choose Update Driver Software.
- Choose Browse my computer for driver software, then Browse.
- Go to C:\Program Files\DisplayLink Core Software, tick Include subfolders and click Next.
DisplayLink says to do this with antivirus not blocking the adapter, for example Symantec Endpoint Protection.
When to contact the maker or DisplayLink
For a bad USB port on the dock, a dead device or a failed replacement test, DisplayLink sends you to the dock’s manufacturer for hardware support.
For a driver or software fault, report the Device Manager error to DisplayLink Support.
Related guides
For general dock faults, see our guide to a docking station not working in Windows 11.
If the dock keeps dropping out, read about a USB device that keeps disconnecting.
To update or roll back a driver by hand, use our Device Manager driver guide.
If Windows does not see the screen at all, try second monitor not detected.
Sources
DisplayLink: First Step Troubleshooting, Device not recognized, Repeated disconnects, Software installation troubleshooting, and the Windows driver download page.