How To Fix A Dell Laptop Wi-Fi Not Working (2026)
When a Dell laptop will not connect to Wi-Fi, the cause is often airplane mode, a switched-off adapter or a driver problem rather than a dead wireless card.
This guide follows Dell’s Wi-Fi troubleshooting articles, which give the steps in a set order from the simplest fix to the most involved.
Work down the list and test your connection after each step, because the first one that works is the one you need.
Quick answer: what to try first
| What you see | Try this first |
|---|---|
| No Wi-Fi option or it is greyed out | Turn off Airplane mode and turn Wi-Fi on |
| Wi-Fi option missing in Windows 11 | Settings, Network & internet, Advanced network settings, then Enable next to Wi-Fi |
| Network found but will not connect | Forget the network and reconnect |
| Connected but no internet | Restart the router, then change the DNS servers |
| Nothing works after an update | Reinstall the Wi-Fi driver in Device Manager |
| Airplane mode will not turn off | Run Diagnose network problems or a network reset |
Turn off Airplane mode and switch Wi-Fi on
Dell says Airplane mode switches off every wireless feature at once, including Wi-Fi, Bluetooth, mobile broadband, GPS and NFC.
- Click the network icon in the lower-right system tray.
- Select the Airplane mode tile to turn it off.
- Select the Wi-Fi tile so it turns blue, then choose your network and enter the password.
In Windows 11, if the Wi-Fi option is missing, Dell says to open Settings, go to Network & internet, select Advanced network settings and click Enable next to Wi-Fi.
If the option is still missing, our Wi-Fi missing guide covers more causes.
Dell adds that if your laptop has a physical wireless switch, it must be on, because physical switches override software controls.
Restart the laptop and the router
- Turn off the laptop.
- Unplug the router and wait about 30 seconds.
- Plug the router in and wait until its lights stabilize.
- Turn the laptop back on.
Forget the network and reconnect
- Click the Wi-Fi icon in the system tray and select Manage Wi-Fi connections, the arrow next to the Wi-Fi tile.
- Under Wi-Fi, find your network and click Forget.
- Select the network again, enter the password and click Connect.
Update the Wi-Fi driver and BIOS
Dell says to connect by Ethernet for this step if you can.
- Search for SupportAssist in the Start menu and open it.
- On the Home tab, select Update software, then click Start.
- Follow the on-screen steps and restart if prompted.
If you have no cable, Dell says to download the driver on another device and move it over by USB.
Our driver guide for Windows 11 explains the Device Manager method.
Use the SupportAssist network tools
- To optimize the network, open SupportAssist, go to the Home tab, select Optimize network and click Start, then restart.
- To run the Wi-Fi troubleshooter, open the Support tab, click Get started under View common issues, expand I want to troubleshoot my PC, then I’m having connectivity issues, and choose I can’t connect to WiFi and Run now.
You can also right-click the Wi-Fi icon in the system tray, select Diagnose network problems and follow the prompts.
Reinstall the Wi-Fi driver
- Right-click Start and choose Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter, select Uninstall device and confirm.
- Restart the laptop.
Dell says Windows reinstalls the driver on its own, and that if you are offline you should not tick the box to remove the driver software, and that saved Wi-Fi networks may be removed.
Check the adapter in Device Manager and the BIOS
| Where | What to check, per Dell |
|---|---|
| BIOS (press F2 at the Dell logo) | Under Connection, confirm the WLAN box is checked, then save and exit |
| Device Manager, adapter Properties, Power Management | Clear Allow the computer to turn off this device to save power |
| Device Manager, adapter Properties, Advanced | Set Power Saving Mode to Disabled or Maximum Performance, if the option exists |
| Pre-boot test (press F12 at the Dell logo) | Open Diagnostics and run the quick test |
Dell also gives vendor-specific values for Intel, Broadcom, Qualcomm Atheros, Killer and Realtek adapters in its advanced Wi-Fi article, and says to note the Manufacturer shown under Change WiFi settings, Hardware properties first.
Reset TCP/IP, DNS and network settings
Open Command Prompt as administrator by searching for cmd, right-clicking it and choosing Run as Administrator.
- Run netsh int ip reset.
- Run ipconfig /release.
- Run ipconfig /renew.
- Run ipconfig /flushdns.
- Restart the laptop and reconnect.
If that does not help, Dell’s next step is Start, Settings, Network & internet, Advanced network settings, Network reset, then Reset now and a restart, which removes saved networks.
Connected but no internet
- Right-click the Wi-Fi icon and select Network and Internet settings, then the Wi-Fi tab.
- Select Hardware properties and click Edit under DNS server assignment.
- Choose Manual, turn IPv4 on and enter one DNS pair, then click Save.
| DNS provider | Preferred and alternate address |
|---|---|
| 8.8.8.8 and 8.8.4.4 | |
| Cloudflare | 1.1.1.1 and 1.0.0.1 |
| Quad9 | 9.9.9.9 and 149.112.112.112 |
Dell then says to run ipconfig /flushdns and ipconfig /registerdns in an administrator Command Prompt and restart.
When Airplane mode will not turn off
- In Device Manager, disable and then re-enable the wireless adapter, and restart.
- Or right-click the Wi-Fi icon, select Diagnose network problems and choose Turn on Wi-Fi or Turn off airplane mode.
- Or use the Network reset above.
Dell’s last resort here is updating the BIOS and then installing the latest wireless driver from Drivers & Downloads.
If your connection works but drops out, our Wi-Fi keeps disconnecting guide picks up from there.
Find the exact error
For stubborn cases Dell says to open Event Viewer with eventvwr.msc, go to Windows Logs, System and filter for WLAN-AutoConfig.
Dell lists three event IDs to watch for.
| Event ID | Meaning per Dell |
|---|---|
| 4001 | The WLAN service will not start |
| 8003 | The driver failed to initialize |
| 11000 | The adapter is not functioning |
You can also run netsh wlan show wlanreport in an administrator Command Prompt, which saves an HTML report to C:\ProgramData\Microsoft\Windows\WlanReport\wlan-report-latest.html.
When to contact Dell support
- The Dell hardware test fails on the network adapter.
- The adapter does not appear in Device Manager or the BIOS after the steps above.
Dell says a failed hardware test may mean the adapter needs replacement, and its article gives no other firm trigger.
Sources: Dell: Troubleshoot Wi-Fi Not Working Issues, Dell: Wi-Fi Not Working? and Dell: Turn Wi-Fi and Bluetooth On and Off.