How To Fix A Dell Laptop Touchpad Not Working (2026)
A Dell touchpad that will not move the cursor is usually switched off, blocked by a connected device or running a faulty driver, and Dell’s support pages cover each case.
This guide follows Dell’s touchpad troubleshooting articles for Windows, in the order Dell gives the steps.
Plug in a USB or wireless mouse first so you can move around Windows while you work through the list.
Quick answer: what to try first
| What you see | Try this first |
|---|---|
| Cursor does not move at all | Restart, then check that Touchpad is turned on in Settings |
| Touchpad stops when a mouse is plugged in | Turn on Leave touchpad on when a mouse is connected |
| Cursor jumps while you type | Set the Taps sensitivity to Low |
| Cursor moves slowly | Adjust the Cursor speed slider |
| Cursor has disappeared | Reinstall the touchpad driver in Device Manager |
| Touchpad looks raised or the case has gaps | Stop and check for a swollen battery |
Check for a swollen battery first
Dell says a distorted touchpad can be a sign of a swollen battery, so check before you troubleshoot anything else.
- Bulging or swelling in the battery area.
- Gaps in the case.
- A keyboard or trackpad that does not click properly or sits raised.
- Wobbling when the laptop is on a flat surface.
- A lid that will not close fully or looks misaligned.
If you see any of these, Dell directs you to its guidance on handling swollen lithium-ion batteries instead of the steps below.
Restart and test with a mouse
Dell says to clean the touchpad and your fingers of dirt, grease, liquid or food, then save your work and restart.
Do not touch the touchpad until Windows has fully started, because Dell says it calibrates during startup.
If the touchpad is unusable and nothing responds, Dell says to hold the power button for at least 15 seconds to force a shutdown, which loses any unsaved data.
A working external mouse tells you the problem is limited to the touchpad.
Make sure the touchpad is turned on
- Go to Start, Settings, Bluetooth & devices, Touchpad.
- Make sure the Touchpad switch is on.
- Expand Touchpad and turn on Leave touchpad on when a mouse is connected if the touchpad dies when you plug a mouse in.
Dell’s keyboard guide adds that some models turn the touchpad off with Fn + F3, with F6 alone, or with a dedicated key to the right of F12, so check your function row.
If you turned it off on purpose, our guide to turning off the touchpad in Windows 11 shows the same setting.
Unplug everything and retest
- Shut the laptop down.
- Unplug everything except the power cable, including USB devices, external displays, keyboards, mice and storage, and undock the laptop.
- Turn it on and test the touchpad.
- If it works, reconnect your devices one at a time and test after each one.
Dell uses this to find the peripheral that is interfering with the touchpad.
Update the BIOS, drivers and Windows
- Search for SupportAssist in the Start menu and open it.
- On the Home tab, select Update Software, then Start.
- Follow the on-screen prompts and restart if asked.
- Go to Start, Settings, Windows Update and select Check for updates.
Dell says that if its site lists no touchpad driver for your laptop, Windows Update supplies it, and some newer laptops use a Precision Touchpad driver built into Windows.
Our driver update guide shows the manual route if SupportAssist is missing.
Reinstall the touchpad driver
- Right-click Start and select Device Manager.
- Expand Human Interface Devices.
- Right-click HID-compliant touchpad and select Uninstall device.
- Restart the computer.
Dell says Windows reinstalls the driver automatically after the restart.
If the cursor has disappeared completely, Dell’s other route is Mice and other pointing devices, where you select Dell Touchpad or HID-compliant mouse, press Shift + F10 (Shift + Fn + F10 on some laptops), choose Uninstall device and restart.
Fix a jumpy, slow or reversed touchpad
| Problem | Dell setting to change |
|---|---|
| Cursor jumps while typing | Touchpad, More touchpad settings, then set Taps sensitivity to Low |
| Pointer hides while typing | Pointer Options tab, then clear Hide pointer while typing |
| Cursor too slow | Touchpad, Gestures & interaction, then the Cursor speed slider |
| Right-click does not work by tapping | Touchpad, expand Taps, then turn on the right-click options |
| Buttons are reversed | More touchpad settings, Buttons tab, then Switch primary and secondary buttons |
| Settings seem wrong | Touchpad, expand Touchpad and select Reset |
Dell says the Reset button is greyed out until you change a touchpad setting, and that not every gesture appears on every laptop.
Dell also mentions Touch Guard, palm check and similar sensitivity options on some models, and its keyboard guide says to move that slider all the way to the right.
Touchpad buttons not working
- Make sure nothing is physically blocking the buttons.
- Clean the touchpad and your fingers.
- Shut down, hold the power button for 15 seconds if needed, then power on and test after a full start.
- Confirm the touchpad is on and update the BIOS.
- Run the SupportAssist touchpad test.
If the buttons still fail, Dell says you can restore Windows to a restore point from when the touchpad worked.
Touchpad stops after sleep
Save your data and restart, and if the touchpad and keyboard are both frozen with no mouse, hold the power button for at least 15 seconds.
Dell then says to update the BIOS and install every pending Windows update.
Run the SupportAssist hardware test
- Open SupportAssist and select the three-bar menu on the left.
- Select Support, then select Get started on the Test my hardware card.
- Scroll to HID-compliant touch pad and select Run Test.
- Select Start and follow the prompts.
Dell has a separate online touchpad test on its SupportAssist input device page, and says a hardware fault may lead to a driver update or a call to Dell Technical Support.
Match the symptom to the fix
| Symptom | Cause Dell points to | Step to use |
|---|---|---|
| Nothing moves | Touchpad off or a faulty driver | Turn it on, then reinstall the driver |
| Fails with a mouse plugged in | Touchpad switched off when a mouse connects | Leave touchpad on when a mouse is connected |
| Erratic or jumping cursor | Dirt, peripherals or gesture settings | Clean it, unplug everything, lower Taps sensitivity |
| Stops after sleep | Outdated BIOS or Windows | Update the BIOS and Windows |
| Raised or wobbling touchpad | Possible swollen battery | Stop and follow Dell’s battery guidance |
When to contact Dell support
- The touchpad fails the SupportAssist hardware test.
- The touchpad or battery area looks swollen or distorted.
- The touchpad still fails after a restore point or reinstall.
Dell does not give strict criteria in its touchpad article, but it points to the Technical Support contact page and the Check Support Status page to see whether your laptop is covered.
If your external mouse is also failing, our mouse guide and our Windows 11 touchpad guide cover the Windows side.
Sources: Dell: Fixing Your Laptop Touchpad not Working in Windows and Dell: Laptop Touchpad Not Working.