Dell ePSA Error Codes And What To Do (2026)
A Dell ePSA error code such as 2000-0142 is the result of the built-in pre-boot hardware test, and it points to the part that failed.
Dell publishes reference tables that say what each code means and what to try.
This guide shows how to run the test and lists the codes owners hit most.
Quick answer: read your code, then follow its row
| Code series | Mostly covers | Where Dell lists it |
|---|---|---|
| 2000-0NNN | Processor, memory, battery, drives, system board, display, fans, USB, network | Dell KB 000181167 |
| 2000-8NNN | BIOS, fans, thermal sensors, chargers, PCIe, diagnostics tool messages | Dell KB 000181162 |
| 2000-4NNN | Hard drive errors (2000-4221, 4224, 4249, 4278) | Dell KB 000181943 |
Dell notes that the last three digits of each code form a beep or LED code, which is how the computer reports the fault when it cannot show a message.
How to start the pre-boot diagnostic
SupportAssist Pre-Boot System Performance Check is the current name for the tool older Dells call ePSA or PSA.
- Turn the computer on.
- At the Dell logo press F12 several times until the One Time Boot Menu appears.
- Select Diagnostics and press Enter, and the quick test starts.
- Wait for it to finish, because the mouse and touch screen do not work during the test.
To test one part, press Esc, choose Advanced test in the lower left, clear Select all, tick the tests you want and select RUN TEST.
On a laptop you must respond to prompts during the LCD test, and Thorough mode makes the test longer.
What to write down when it fails
A failure screen gives you three things Dell asks for.
- The error code, which has the form 2000-XXXX
- The validation code
- Your Service Tag
You can scan the QR code on the screen with a phone, which opens Dell’s pre-boot analysis page.
Or go to that page yourself and enter the error code, validation code and Service Tag.
Dell says QR codes appear on some newer computers with ePSA version 3.0 when an issue is found.
Out-of-warranty offers through the online tool are limited to PC customers in the US, Canada, the UK and France.
The standard steps Dell repeats for most codes
Unless a row says otherwise, Dell’s reference tables tell you to do the same three things.
- Update the BIOS.
- Run the diagnostic again.
- If the code returns, submit it through the online tool.
Rows below that say “standard steps only” mean exactly this.
Hard drive and SSD codes
| Code | What Dell says it means | What to do |
|---|---|---|
| 2000-0141, 2000-0150 | No drive detected | Reseat the drive and cables |
| 2000-0142, 2000-0143, 2000-0145 | Self-test failed, SMART read failed or self-test timed out | Update BIOS and drive firmware, then reconnect the drive |
| 2000-0146 | Self-test log shows earlier errors | Update firmware, then run chkdsk /r or reinstall the operating system |
| 2000-0151 | SMART predictive failure | Update firmware, reconnect, consider replacement if it persists |
| 2000-0155 | No drive in a laptop that requires one | Reconnect the drive |
| 2000-0156, 2000-0161 | NVMe read test failed or NVMe drive not detected | Update BIOS and rerun |
| 2000-4221, 4224, 4249, 4278 | Drive error detected | Update BIOS, reseat the cables, rerun |
If the message on screen is the plain “No boot device found” text, see our guide to the Dell no boot device found error.
Memory and processor codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-0121, 0122, 0123, 0128, 0715, 0722 | Memory errors or a failed memory location | Reseat memory, test one module at a time, try a known-good module |
| 2000-0261 | Several memory modules failed, likely a motherboard problem | Standard steps only |
| 2000-0111, 2000-0112 | Processor exception or machine check error | Standard steps only |
| 2000-0115 | Thermal stress condition | Check temperatures and make sure airflow is not blocked |
Battery and charger codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-0131, 0132, 0134 | Battery missing, near end of life or past its charge-cycle limit | Power down and reseat the battery if possible |
| 2000-0133 | Battery cannot supply enough power | Reseat, restart, contact Dell if it persists |
| 2000-0135 | Non-Dell battery the computer cannot charge | Use a Dell-branded battery and rerun with the charger attached |
| 2000-0721 | Battery malfunction | Replace the battery and rerun once charged |
| 2000-8135 to 8138 | Charger not detected, unexpectedly detected, not supplying power, or wattage undetermined | Reattach the charger and cable, replace a faulty or non-Dell charger |
Our guide to a Dell AC adapter that is not recognized covers the Windows side of the charger message.
System board, CMOS and clock codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-0212 | CMOS settings mismatch | Standard steps only |
| 2000-0213 | CMOS battery failure | Replace the CMOS battery |
| 2000-0221 | Interval timer not functional | Reseat the CMOS battery |
| 2000-0232, 0233, 0234 | Real-time clock or HPET not updating correctly | Standard steps only |
Display, fan and thermal codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-0321 | LCD EDID data inaccessible | Reconnect the LCD cable |
| 2000-0322 | Brightness cannot be changed | Adjust with hotkeys, then check in BIOS |
| 2000-0324, 0325 | LCD test colors not confirmed or no input | Rerun the LCD test and answer the prompts accurately |
| 2000-0501, 0511, 0512, 0712 | Fan failed a test, did not respond or ran too fast | Check for obstructions and loose connections |
| 2000-0711 | Repeated thermal trips | Clear obstructed air vents |
Heat and fan codes pair with our guide to a Dell laptop that is overheating or has a loud fan.
USB, touchpad and other device codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-0243, 0244, 0245 | USB device, controller or port failure | Disconnect USB devices, test other ports, try a known-good device |
| 2000-0313 | Touchpad or pointing stick not detected | Reconnect it and confirm it is enabled in BIOS |
| 2000-0620 | Network device may be faulty | Check connections for bent pins |
| 2000-0800 | Touchscreen not responding | Restart and follow Dell touchscreen troubleshooting |
| 2000-0901 | Fingerprint reader not responding | Update the fingerprint driver |
Common 2000-8NNN codes
| Code | Meaning | What to do |
|---|---|---|
| 2000-8002 | BIOS interface or high temperature reading | BIOS update, check vents |
| 2000-8005, 8006 | Fan speed failure or speed cannot be set | BIOS update, check vents |
| 2000-8016 | Battery health could not be retrieved | Reseat the battery, update BIOS |
| 2000-8165, 8166 | Unknown MBR code or virus detected | Run antivirus, update or reinstall the operating system |
| 2000-8611 | Speaker tones not heard | Unplug external audio, reseat the speaker connector |
What to do if every test passes
A pass means the tested hardware responded correctly, so Dell points you to the QR code for more help or to the EXIT button at the lower right to reboot.
You can then look at the tool’s other tabs before leaving.
- SYSTEM INFO on the left shows the Configuration, Health and Firmware tabs.
- LOGS on the left shows the results of earlier diagnostic runs.
When to contact Dell
If a code returns after a BIOS update and the steps in its row, use the online tool or contact Dell Technical Support with the three details above.
Dell also lists a drive failure that returns after reseating as a case for support under warranty.
Sources: Dell KB 000181167, KB 000181162, KB 000181943 and KB 000181163.