How To Fix ChargePoint Not Starting A Charge (2026)
A ChargePoint station that will not start usually comes down to the account, the phone setting or the cable rather than a broken station.
ChargePoint lets you start a session three ways: Tap to Charge, the app, or a ChargePoint card.
This guide walks through each one in the order ChargePoint’s own help pages describe.
Quick answer: what to check first
| What you see | Check this first |
|---|---|
| Tapping your phone does nothing | Confirm the ChargePoint app is installed, you are signed in and Tap to Charge is set up. |
| Card does not work | Make sure the card has been activated on your account. |
| Station is plugged in but the car is not charging | Check the cable is firmly connected at the car and at the station. |
| Cannot remove the plug | Unlock the car doors, because some EVs hold the plug until they are unlocked. |
| Station has no screen | Look for a QR code, or ask the station owner for access. |
| Station seems broken | Report it in the app with Report a Problem. |
The three ways to start a charge
Pick the method your station supports, since some stations only accept certain ones.
| Method | What you do | Requirement |
|---|---|---|
| Tap to Charge | Hold your phone over the station reader, wait for the beep, then plug in. | North America only, iOS 15 or later, or Android 8.0 or later |
| App | Select the station, tap Start Charge in Station Details, then plug in. | Signed in to the ChargePoint app |
| ChargePoint card | Tap the card on the card reader symbol, then plug in. | Card activated in advance |
Fix Tap to Charge not unlocking the connector
Tap to Charge needs a one-time setup before it works.
- Scan the QR code on the station, or open the ChargePoint app directly.
- Sign up or sign in.
- On iPhone, add ChargePoint Pass to Apple Wallet, and on Android, turn on NFC.
- If your account already exists, open the Account tab, choose Manage Cards and set up Tap to Charge there.
- Hold the phone over the station reader until the station beeps.
ChargePoint says to keep NFC and the screen on while you tap with an Android phone.
On an iPhone without Face ID, it says to keep your finger on the Touch ID button during the tap.
Also check that your phone runs a supported system, which ChargePoint lists as iOS 15 or later, or Android 8.0 or later.
If tapping still fails, use the app or a card instead, since each method can start a session.
Fix the app not starting a session
Open the app, find the station on the map and tap Start Charge in Station Details.
If the button does nothing, confirm you are signed in to your ChargePoint account.
Then plug the connector into the car, since the session is meant to begin once the station recognizes you.
Fix a ChargePoint card that is not working
ChargePoint’s first check for a card that fails is whether it was activated.
- Sign in to the ChargePoint app.
- Open the Account section and go to Manage Cards.
- Choose the option to activate a card.
- Type the serial number printed on the card.
- Select Done.
Some stations run by roaming partners require a ChargePoint card, so the app or a tap may not be enough there.
Stations with no screen
A station with a QR code uses the Tap to Charge steps above.
A station with no QR code and no screen is usually in a private-use area, and you need access from the station owner.
With that access you can use an RFID card by tapping it on the card reader symbol, or start remotely by tapping Start Charging in the app.
The plug is in but the car is not charging
Check that the cable is connected to both the vehicle and the station.
Then confirm the vehicle itself shows that it is charging.
If it still will not start, try another port at the same station before you leave.
If you are on a fast charger, press the stop button on the station before you unplug at the end.
If the plug will not come out, unlock the car doors, because ChargePoint notes that some EVs need that before the plug can be removed.
Check how you pay
Fee-based stations bill the payment method on your account.
- Open the ChargePoint app main menu and select Account.
- Choose Payment.
- Tap Payment Type and pick Pay as you go or Auto reload.
ChargePoint says a changed payment type starts on the first day of the following month.
What the app map colors mean
The map helps you avoid driving to a port that is taken or out of service.
| Map color | Meaning |
|---|---|
| Green | A port is open and ready to use |
| Blue | A port is occupied |
| Gray | A port is out of service or closed, or its status cannot be determined |
One bolt on a pin means slow Level 2 charging, two bolts mean medium DC and three bolts mean DC fast.
Report a station that is not working
- Open the app and sign in.
- Go to the Chargers section.
- Find the station on the map and tap the port you tried.
- Scroll to the bottom and tap Report a Problem.
- Choose the option that matches your problem.
- Add a short note in the Comment field and tap Submit.
Most stations are independently owned, and ChargePoint says it contacts the owner and helps arrange the repair.
When to contact ChargePoint
| Situation | Where to go |
|---|---|
| You are mid-session and stuck | Open Current Session in the app and select Help for the chatbot, which ChargePoint lists as in open beta |
| Safety concern, vandalism or a station fire | Call 1-888-758-4389, available 24/7 |
| Complex billing, such as refunds across several sessions | Call 1-888-758-4389 |
| Other help | chargepoint.com/support |
Do not open or repair a station yourself, and leave hardware faults to ChargePoint or the station owner.
Related guides
If your phone connects to a Tesla instead, see how to fix the Tesla app not connecting to your car.
For home charging, read our ChargePoint Home Flex review.
Our EVs versus gas cars guide covers ownership costs.
Sources: ChargePoint: start a charging session, report a station and activate a card.