|

Fix Canon Generic Plus Driver Not Installing In Windows 11 (2026)

The Canon Generic Plus driver sometimes fails to install correctly on a Windows 11 PC when the printer is connected by USB.

Canon says this depends on the model, and its fix is to reinstall or update the driver.

This guide follows Canon’s own steps for both methods, plus the installer options that matter when the first attempt fails.

Quick answer: fix a Canon Generic Plus driver that will not install

Try thisWhat it does
Method 1Unplug the USB cable, delete the existing print queue, restart, then install the latest Generic Plus driver over USB
Method 2Keep the queue and update its driver by hand with Have Disk and the INF file from the download
Still failingRemove the leftover Canon entry under Other devices in Device Manager and run the USB install again
Cannot find the printerInstall over the network instead, using the installer’s device search or an IP address

What Canon says is going wrong

Canon’s support page says the Generic Plus driver may not install properly over USB on Windows 11 or Windows 10.

It also says whether this happens depends on the printer model.

The Generic Plus driver is one driver that covers many Canon models.

Generic Plus driver types

Canon’s installation guide lists five driver types in the Generic Plus family.

DriverNote from Canon’s guide
UFR IIPart of the Generic Plus family
LIPSLXPart of the Generic Plus family
LIPS4Supports only English and Japanese
PCL6Not supported with Japanese
PS3Also uses a PPD file

Use the type your printer’s driver page offers, because the printer’s own PDL Selection (Plug and Play) setting has to match the driver.

Before you start

  • Sign in to Windows with an account in the Administrators group.
  • Download the latest Generic Plus driver for your printer from Canon’s website.
  • Disconnect the USB cable from the PC.

Canon’s installation guide also says to allow any Windows prompts to change the computer and any unverified-publisher warning.

Method 1: delete the print queue and reinstall

This is the first fix Canon gives, and it needs a restart.

  1. Make sure the USB cable is unplugged.
  2. Open Start, then Settings.
  3. Select Bluetooth & devices, then Devices.
  4. Select Devices and printers.
  5. Right-click your Canon model and open Printer properties, choosing the entry for the driver you use if several are listed.
  6. Open the Advanced tab and check that Microsoft IPP Class Driver appears in the driver drop-down menu, then select Cancel.
  7. Back in Devices and Printers, right-click your model, go to Delete print queue, and pick the driver you noted. If that option is missing, select Remove device.
  8. Restart the computer.

After the restart, install the latest Generic Plus driver over USB as described below.

Our guide on removing a printer in Windows 11 covers the same removal from the Settings app.

Install the driver over USB

Canon’s guide describes the USB installer route in these steps.

  1. Turn off the printer.
  2. Run the installer from the download and select USB Connection, then Next.
  3. Connect the USB cable and turn the printer on when the installer asks.
  4. If the cable is already connected correctly, select Skip to stop the wait.
  5. Check the configuration profile and change it if needed.
  6. Select Restart or Exit.

Canon says the installer can also update drivers that are already installed.

Method 2: update the driver with Have Disk

Use this only if Method 1 does not work, because it adds the driver by hand and does not remove the old queue.

  1. Unplug the USB cable and open Start, then Settings.
  2. Go to Bluetooth & devices, then Devices, then Devices and printers.
  3. Right-click your Canon model and open Printer properties.
  4. On the Advanced tab, confirm Microsoft IPP Class Driver is in the drop-down menu.
  5. Select New Driver, then Next, then Have Disk.
  6. Select Browse and open the folder you downloaded the driver to.
  7. Choose the file \x64\Driver\CNLB0MA64.INF and select OK to update the driver.

Canon’s page names that exact INF file for this fix.

Clear a stuck install in Device Manager

If the USB installation fails, Canon’s installation guide points to Device Manager.

  1. Open Device Manager.
  2. Look under Other devices for an entry named Canon plus your model name.
  3. Uninstall that device.
  4. Run the USB installation again.

Our guide on updating a driver in Windows 11 shows how Device Manager works if you have not used it.

If you are on Windows 10

Canon’s steps are written with Windows 11 screens, but Windows 10 follows the same plan with a different start.

Go to Settings, then Devices, then Printers & scanners, select your device, choose Manage, and select Printer properties.

From there, continue with the Advanced tab check in either method.

System requirements for the driver

ItemCanon’s guide says
Client WindowsWindows 7, 8.1, 10 and 11
Not supportedARM architecture
ConnectionTCP/IP network or USB, and USB may not be supported depending on the setup
Services for device informationRPC, TCP/IP NetBIOS Helper and Workstation, with startup type not disabled

Install over the network instead

If USB keeps failing, the installer can find a printer on your network.

  1. Start the installer, pick a language, and accept the license.
  2. Select Standard, then Next.
  3. Choose your printer from the Printer List, using the IPv4, IPv6 or WSD Devices tabs.
  4. Select Search Again if it is missing.
  5. Select Start in the Printer List for Driver Installation, then Restart or Exit.

If the printer still does not appear, choose Custom, then Add New Printers, and set a Standard TCP/IP port with the printer’s IP address.

Our Windows 11 add a printer guide has the same IP address route inside Settings.

When a network printer is not found by WSD

  • On the printer, turn on Use WSD Printing and Multicast Discovery Settings.
  • Make sure the printer’s PDL Selection (Plug and Play) setting matches the driver.
  • On the PC, set the network profile to Private and turn on network discovery.
  • If the driver is already installed, uninstall it and run discovery again.

Update an installed Generic Plus driver

  1. Download the update installer from Canon’s website.
  2. If the driver was installed over USB, connect the printer and turn it on.
  3. Start the installer and select Custom under Printer Setup, then Next.
  4. Select Update Existing Printer Drivers, then Next.
  5. Select Start, then Exit, and restart if asked.

Uninstall the driver completely

Canon gives three ways to start the uninstaller.

MethodWhere
SettingsApps, then Apps & features, find the driver and select Uninstall
Control PanelPrograms, then Uninstall a program, then Uninstall/Change
Uninstall fileRun UNINSTAL.exe from the Canon PrnUninstall folder or from the misc folder of the driver package

Choose the device name and select Delete, then confirm with Yes.

The Cleanup button removes every file and registry entry for all listed drivers, so use it only when you want all of them gone.

If printing still fails after the driver installs, see our guide to updating or rolling back a printer driver in Windows 11.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *