How To Turn Off VoiceOver On Apple Watch (2026)
Your Apple Watch is reading every tap out loud because VoiceOver, its built-in screen reader, is on.
The fastest way to stop it is to triple-click the Digital Crown, or to double-tap the VoiceOver switch in Settings.
The steps below come from Apple’s own Apple Watch user guide, including the gestures that change while VoiceOver is running.
Quick answer: three ways to turn off VoiceOver
| Method | Where | What to do |
|---|---|---|
| Digital Crown | Any screen | Press the Digital Crown quickly three times (works if VoiceOver is in your Accessibility Shortcut) |
| Watch Settings | Settings > Accessibility > VoiceOver | Double-tap the VoiceOver button to turn it off |
| iPhone | Apple Watch app > My Watch > Accessibility > VoiceOver | Open the VoiceOver option and switch it off |
Apple notes that the Accessibility Shortcut and Settings routes both work, so use whichever you can reach first.
Why your Apple Watch is talking to you
VoiceOver announces what is happening on the screen so people with low vision can use the watch without looking at it.
Apple says you can start it during first-time setup by triple-clicking the Digital Crown.
The same triple-click is the Accessibility Shortcut, which Apple says can switch VoiceOver on or off, so a few accidental clicks can start the voice.
You can also ask Siri to turn on VoiceOver, and you can turn it on from the Apple Watch app on iPhone.
Turn off VoiceOver with the Digital Crown
- Press the Digital Crown quickly three times.
- If you set up more than one Accessibility Shortcut feature, a list appears, so choose VoiceOver and tap Done.
- Listen for VoiceOver to stop speaking.
Apple’s shortcut page says a triple-click turns the feature off again, and it gives no separate steps for VoiceOver.
Turn off VoiceOver in Settings on the watch
- Open the Settings app on your Apple Watch.
- Go to Accessibility, then tap VoiceOver.
- Double-tap the VoiceOver button to turn it off.
The double-tap matters, because while VoiceOver is running a single tap only selects an item and speaks its name.
Turn off VoiceOver from your iPhone
- Open the Apple Watch app on the iPhone paired with the watch.
- Tap My Watch.
- Tap Accessibility, then tap VoiceOver.
- Switch VoiceOver off.
Apple says most VoiceOver settings are mirrored in this part of the Apple Watch app.
Gestures that work while VoiceOver is on
Until VoiceOver is off, the watch uses different gestures from normal.
| Goal | Gesture while VoiceOver is on |
|---|---|
| Hear an item | Move one finger over the screen, or tap once |
| Select the next or previous item | Swipe left or right with one finger |
| Open or press an item | Double-tap instead of tapping |
| Change pages | Swipe left, right, up or down with two fingers |
| Go back | Trace a “z” shape with two fingers |
| Pause or resume speech | Tap with two fingers |
| Change volume | Double-tap and hold with two fingers, then slide up or down |
Stop VoiceOver from turning back on
If an accidental triple-click is the cause, take VoiceOver out of the Accessibility Shortcut.
- On the watch, open Settings, then Accessibility, then Accessibility Shortcut.
- Tap VoiceOver so its checkmark disappears.
You can make the same change on the iPhone under Apple Watch app > My Watch > Accessibility > Accessibility Shortcut.
| Feature a triple-click can control |
|---|
| AssistiveTouch |
| Control Nearby Devices |
| Left/Right Balance |
| Reduce Motion |
| Reduce Transparency |
| Touch Accommodations |
| VoiceOver |
| Zoom |
Leaving only the features you actually use selected means a stray triple-click does less.
Keep VoiceOver but make it quieter or slower
If you only want the voice to be less intrusive, Apple lists these controls under Settings > Accessibility > VoiceOver.
| Setting | What it does |
|---|---|
| Speaking rate | Changes how fast the voice talks |
| Speech | Voice, pitch, rotor voices and Improve Speech Clarity |
| Audio | VoiceOver volume and audio ducking |
| Sounds & Haptics | Turns VoiceOver sounds and haptics on or off, and sets Match Speech Volume |
| VoiceOver hints | Can be turned off |
| Wrist raise | Speaks the name of the highlighted item when you raise your wrist |
| Speak seconds | Controls whether seconds are spoken |
If the screen goes dark while VoiceOver is on
Apple lists Screen Curtain as a VoiceOver setting that turns the display off for privacy while VoiceOver keeps running.
If the screen looks black but the watch is still talking, check Screen Curtain in the same VoiceOver menu.
With an Always On display, tapping the dimmed screen makes VoiceOver focus on the item under your finger.
For wake and brightness problems that are not caused by VoiceOver, see our guide to the Apple Watch screen turning off too fast.
Using the VoiceOver rotor
The rotor lets you change a setting without leaving the screen you are on.
Rotate two fingers on the display to choose a setting, then swipe up or down to adjust it.
| Rotor choice | Use |
|---|---|
| Words | Move through text word by word |
| Characters | Move through text character by character |
| Actions | Pick an extra action for the selected item |
| Headings | Jump between headings |
| Volume | Raise or lower VoiceOver volume |
| Speaking Rate | Speed up or slow down the voice |
Swiping up moves to the previous item or increases the setting, and swiping down moves to the next item or decreases it.
Hand Gestures and the Digital Crown
VoiceOver can also be controlled with Hand Gestures, which you set up on the iPhone under My Watch > Accessibility > VoiceOver > Hand Gestures.
The gestures Apple lists are clench, double clench, tap and double tap.
Apple warns that the universal double-tap gesture is unavailable while Hand Gestures is on, so check this setting if Double Tap stopped working; our Double Tap fix covers the rest.
VoiceOver can also use the Digital Crown for navigation, and you can adjust that in the same menu.
Where the VoiceOver settings live
Apple’s accessibility overview places VoiceOver and Zoom on the watch under Settings > Accessibility > Vision.
On the iPhone, the same features sit in the Apple Watch app on the My Watch tab, under Accessibility.
Apple describes VoiceOver as a built-in screen reader that tells you what is happening on the watch, and it describes Zoom as a built-in magnifier that works wherever you are on the watch.
If the screen is enlarged rather than talking, the cause is Zoom instead, and our iPhone zoom guide shows the same idea on the phone.
Apple also says you can use VoiceOver from the very first setup screen by triple-clicking the Digital Crown.
Related Apple Watch and iPhone guides
- How to turn off VoiceOver on iPhone and iPad
- How to turn off Water Lock on Apple Watch
- Apple Watch not getting notifications