How To Turn Off Water Lock On Apple Watch (2026)
If your Apple Watch suddenly ignores every tap, Water Lock is the first thing to check.
Water Lock turns the touchscreen off on purpose, and Apple builds the way out into the Digital Crown.
This guide covers how to turn Water Lock off, how to clear water from the speaker, and what Apple says about getting your watch wet.
Quick answer: turn off Water Lock and eject water
| Task | What to do |
|---|---|
| Turn Water Lock on | Press the side button to open Control Center, then tap the Water Lock button (water-drop icon) |
| Turn Water Lock off and eject water | With Water Lock on, press and hold the Digital Crown until the display says Unlocked |
| Same task on watchOS 8 or earlier | Rotate the Digital Crown instead of pressing it |
| Apple Watch Series 1 and earlier | Place the watch speaker-side down on a lint-free cloth so the water drips out |
When the Crown is released the watch plays a series of tones that push water out of the speaker.
What Water Lock does
Apple says Water Lock prevents unintended taps on the display while you wear the watch in water.
While it is on, the display does not respond to touch, and tap and wrist flick gestures stop working too.
A Water Lock icon appears at the top of the watch face so you can tell it is active.
That is why a locked watch can look frozen when it is simply ignoring your fingers.
Turn Water Lock on manually
- Press the side button to open Control Center.
- Tap the Water Lock button, which shows a water-drop icon.
- Look for the Water Lock icon at the top of the watch face.
When Water Lock turns on by itself
Apple says Water Lock turns on automatically when you start a water-based workout, such as swimming or surfing.
On Apple Watch Ultra it also turns on when you begin a scuba dive.
Apple adds that on Ultra and later, Water Lock can activate automatically when the watch is submerged 10 cm or less.
If you end a swim and the screen still will not respond, the lock from the workout is probably still on.
Turn Water Lock off
- Make sure the watch is awake and showing the Water Lock icon.
- Press and hold the Digital Crown until the display says Unlocked.
- Wait while a series of tones plays to clear water from the speaker.
- Use the display normally once the tones finish.
On watchOS 8 or earlier, rotate the Digital Crown instead of pressing it.
What the ejection tones do
Apple says the tones clear water from the speaker after you unlock the watch.
Apple’s water resistance page lists this step for Series 2 and later.
Apple adds that you can turn on Water Lock manually from Control Center on these models.
Apple says the tones play after the display shows Unlocked, so wait for them to finish.
Apple Watch Series 1 and earlier
Apple gives a different step for these older models.
Place the watch speaker-side down on a lint-free cloth so any water drips out.
Muffled speaker or microphone after water
Apple says a muffled speaker or microphone may perform poorly until the water fully evaporates.
Charging overnight may speed up evaporation, according to Apple.
On Series 3 and later, the barometric altimeter may read less accurately while water sits in the air vent.
Normal performance returns once the water has evaporated.
If the watch also refuses to charge, see Apple Watch not charging or charging slowly.
Water resistance by model
| Model | Apple’s rating |
|---|---|
| Series 1 and 1st generation | IPX7 under IEC 60529 |
| Series 2 and later | 50 m under ISO 22810:2010 |
| Ultra and later | 100 m under ISO 22810:2010, plus EN13319 compliance |
| Series 7 and later, and Ultra and later | IP6X dust resistance |
Apple calls the watch water resistant, but not waterproof.
Apple also says water resistance can diminish over time and that the watch cannot be rechecked or resealed.
What each model can handle
| Model | Fine for | Not recommended |
|---|---|---|
| Ultra and later | Recreational scuba diving to 40 m, swimming, showering, water skiing | Saunas above 55°C (130°F) |
| Series 2 and later | Shallow-water swimming in a pool or ocean | Diving, water skiing, other deep or high-velocity water, saunas |
| Series 1 and 1st generation | Splashes and rain | Submersion |
Everyday exposure such as sweat during exercise, walking in rain and handwashing is fine, per Apple.
What to keep off the watch
- Soap or soapy water, including in the shower or bath
- Perfume, solvents, detergent, acids or acidic foods
- Insect repellent, lotions, sunscreen, oil and hair dye
- Steam rooms
- Cliff diving or high diving
- Impacts and drops
Apple says substances other than water can damage the water seals and acoustic membranes if they touch the watch.
Bands that are not water resistant
Apple lists several bands that are not water resistant, including Magnetic Link, Modern Buckle in FineWoven or leather, Leather Link, Milanese Loop, Link Bracelet, and Hermès leather and knit bands.
Apple also says stainless steel and leather bands should not be exposed to liquids.
How to dry and clean the watch
| Do | Do not |
|---|---|
| Wipe off water with a nonabrasive, lint-free cloth | Use heat, compressed air or sprays |
| After swimming, rinse gently under lightly running, warm, fresh water (Series 2 and later) | Insert anything into the microphone or speaker ports |
| Dry the watch and band thoroughly afterward | Shake the watch |
| Clean with fresh warm water and a lint-free cloth if anything other than water got on it | Rely on the watch being resealed, because Apple says it cannot be |
Water Lock during workouts
Apple’s Workout guide also points to Water Lock for preventing accidental taps during exercise.
Open Control Center with the side button and tap the Water Lock button to turn it on.
If you use the Workout app around water, see Apple Watch screen turning off too fast if the display stays dark after you unlock the watch.
When to contact Apple
Apple’s water resistance page does not address warranty coverage.
If the speaker stays muffled after the watch is dry, or water resistance may have been compromised, contact Apple Support and ask about your options.
Official pages: How to use Water Lock and eject water, About Apple Watch water resistance and Change settings in Workout on Apple Watch.