How To Fix Apple TV Not Connecting To Wi-Fi (2026)
An Apple TV that will not join Wi-Fi, rejects the password, or reports a Network Issue is usually blocked by something in the network path.
Apple has separate official articles for joining Wi-Fi, for the Network Issue or No Internet message, and for streaming trouble in the Apple TV app.
This guide combines them in a sensible order, starting with the quick fixes and ending with router settings.
Quick answer: match the symptom to the fix
| What you see | Try this first |
|---|---|
| No Wi-Fi option in Network settings | Unplug the Ethernet cable |
| Password error or stuck connection | Forget the network, then rejoin it |
| Wi-Fi needs a second login | Select Continue on iPhone or iPad |
| Network Issue or No Internet in the Home app | Restart the Apple TV, modem and router |
| Connected but video will not play | Check outages and streaming speed |
Restart the equipment between attempts so you can tell which step helped.
Unplug the Ethernet cable
If your Apple TV has an Ethernet port, a connected cable hides the Wi-Fi option.
Unplug the cable, and if you are switching from wired to wireless, Apple says the Apple TV should offer to join Wi-Fi after several minutes.
You can also open Settings, then Network, and choose an available network, and Apple says this does not require setting the Apple TV up again.
Join the Wi-Fi network
Joining a network takes only a few selections.
- Go to Settings, then Network.
- Choose your Wi-Fi network.
- Enter the password if asked.
You can also hold the TV button to open Control Center and select the Wi-Fi button.
Fix a password error by forgetting the network
A saved network that no longer matches your router can block the connection.
- Go to Settings, then Network, then Wi-Fi.
- Select your current Wi-Fi network and choose Forget Network.
- Press Menu or Back to return to the previous screen.
- Select Network again, choose your network, and enter the password.
Join a network that needs a second login
Hotel, dorm and similar networks ask for details on a web page after you connect.
- Update the Apple TV to the latest software.
- Join the Wi-Fi network.
- When prompted, select Continue on iPhone or iPad.
- Follow the steps on that device, such as entering a username and password.
Apple notes that some of these networks time out, so you may need to reconnect.
Restart the Apple TV and your network gear
A restart clears many temporary connection faults.
- On the Apple TV, go to Settings, then System, then Restart.
- Unplug your router and your cable or DSL modem, then plug them back in.
Check whether the problem persists after each restart.
Check the router and placement
Signal quality matters as much as settings.
| Check | Apple guidance |
|---|---|
| Modem and router | Both connected to power, or the single combined device powered on |
| Distance | Keep the Apple TV and router in the same room if possible |
| Placement | Do not set the Apple TV directly on or within a foot of the router |
| Obstructions | Avoid physical obstructions, especially metal surfaces |
| Wired option | If the Apple TV has an Ethernet port, connect it directly to the modem |
Apple’s 4K guidance also suggests using a 5GHz or 6GHz (6E) network, under Settings, Network, Wi-Fi, to avoid interference.
Use Ethernet to test and update
A temporary wired connection can show whether the Wi-Fi is the problem.
- Connect the Apple TV directly to your router or modem with an Ethernet cable.
- Go to Settings, then System, then Software Updates, and install any update.
- Unplug the cable and try joining Wi-Fi again.
While on Ethernet, Apple says you can go to Settings, then AirPlay and Apple Home, and turn off Peer-to-Peer Wireless to keep Wi-Fi in low-power mode until another device sends an AirPlay request.
If the Home app says Network Issue or No Internet
This message means the Apple TV cannot reach your Wi-Fi network or your active home hub.
| Cause | What Apple suggests |
|---|---|
| No internet | Check your internet provider for an outage if the modem and router lack solid internet lights |
| Wi-Fi not connected | Move the Apple TV closer and remove sources of interference |
| Network mismatch | Put the Apple TV and the active home hub on the same Wi-Fi network |
| Unreachable hub | Check router firewall rules and other settings that may block the hub |
To find the active hub, open the Home app, tap More, then Home Settings, then Home Hubs and Bridges.
Router settings Apple points to
If every device is on the same network and the hub is still unreachable, a router setting may be the cause.
- Run only one DHCP server on the network, because several can cause IP address conflicts.
- If you set a custom DNS server, verify that its IP address is correct.
- Peer-to-peer traffic is often blocked on guest networks, so use a different network or allow it on the router.
- Enable NAT only on the router, because enabling it on both modem and router creates double NAT.
If you do not manage the network, Apple says to work with your internet provider or network administrator.
Connected, but video will not stream
When the Wi-Fi works but the Apple TV app will not play, the connection speed or an outage may be to blame.
Apple says streaming HD content requires 8 Mbit/s or faster, and it suggests checking Apple’s System Status page for outages.
It also suggests testing another device on the same connection, and contacting your internet provider if that device fails too.
If other devices also drop off Wi-Fi, our guide to iPhone Wi-Fi disconnecting may help, and our AirPlay on LG TVs and Samsung TVs guides cover network-related casting faults.
Where to get more help
Apple’s Wi-Fi article points to a Get suggestions tool at getsupport.apple.com for next steps.