|

How To Fix Bluetooth Headphones Not Connecting To Apple TV (2026)

Bluetooth headphones usually fail to connect to an Apple TV because the headphones are not in pairing mode, are out of range, or were paired before and need to be forgotten.

AirPods and Beats have a faster route through Control Center, while other brands pair under Settings.

The steps below follow Apple’s own Apple TV 4K guides and support articles.

Quick answer: which method applies to you

HeadphonesHow to connect
AirPods or BeatsPress and hold the TV button, open Control Center, then select Audio Controls and choose the headphones
Other Bluetooth headphonesSettings > Remotes and Devices > Bluetooth, then select them in the list
Listed but will not connectSelect them, choose Forget this Device, then pair again

Put the headphones in pairing mode first

Apple says to set the Bluetooth device to discoverable, using the device’s own instructions, before you connect it to Apple TV 4K.

Check that the headphones are charged and turned on, because Apple lists both among the first checks when pairing fails.

Pair non-Apple Bluetooth headphones

  1. Put the headphones in pairing mode.
  2. On the Apple TV, open Settings and choose Remotes and Devices, then Bluetooth.
  3. Wait for the Apple TV to find nearby accessories.
  4. Select your headphones in the Other Devices list.
  5. Enter a four-digit code or PIN if one is requested.

Once paired, the accessory appears under My Devices.

Connect AirPods or Beats

Apple lists two requirements for AirPods and Beats: they must be compatible with Apple TV 4K, and you must be signed in on the Apple TV with the same Apple Account associated with the headphones.

  1. Press and hold the TV button on your remote to open Control Center.
  2. Select the Audio Controls button.
  3. Choose the headphones you want to use.

Other speakers connected to the Apple TV turn off when the headphones connect.

AirPods and Beats that were connected before reconnect automatically when you put them on.

Use or turn off the connect prompt

If you put on your headphones while the Apple TV is on and your profile is active, an onscreen alert asks you to connect by pressing the TV button.

To stop that alert, go to Settings > Remotes and Devices > Bluetooth and turn off Suggest Nearby AirPods.

What to do if pairing fails or the connection drops

Apple’s Bluetooth accessory article lists these checks.

ProblemWhat to do
Weak or dropping connectionKeep the accessory within range and check for interference nearby
Accessory will not turn on or pairMake sure it is charged and turned on
Software problemsUpdate the software or firmware on both the accessory and the Apple TV
Poor signalMove the Apple TV closer to the television
Listed but will not connectUnpair it and pair it again

If problems continue, Apple says to contact the accessory’s manufacturer.

Forget the headphones and pair again

  1. Open Settings > Remotes and Devices > Bluetooth.
  2. Select the headphones under My Devices.
  3. Choose Forget this Device.
  4. Put the headphones back in pairing mode and pair them again.

Update tvOS and the headphones

Apple’s list of fixes includes updating the software on the Apple TV, which you do under Settings > System > Software Updates > Update Software.

Update the headphones’ own software or firmware too, using the maker’s instructions, and then try pairing again from the Bluetooth screen.

Check the sound after connecting

If the headphones connect but you hear nothing, use Control Center to confirm they are the selected audio output.

Our guide to an Apple TV with no sound covers the TV and receiver side.

Adjust AirPods controls from the Apple TV

Press and hold the TV button, open Control Center and go to the headphones icon at the top.

ControlOptions
Noise ControlNoise Cancellation, Transparency, Adaptive or Off
Conversation AwarenessLoud Sound Reduction or Conversation Awareness
Spatial AudioTurn spatial audio features on
Share AudioShare audio with a second pair of headphones

Apple notes that not all options are available for all AirPods and Beats models.

Listen with two pairs of headphones

  1. Connect your AirPods or Beats to the Apple TV 4K.
  2. While a show or music plays, press and hold the TV button to open Control Center and move to the AirPods tab.
  3. Select Share Audio and follow the onscreen prompts to pair the second set.

You can share with up to two pairs of compatible AirPods or Beats.

Apple’s separate AirPods guide for Share Audio on Apple TV 4K says it applies to tvOS 27 and later.

Personalized spatial audio is not available while two pairs of headphones are connected.

Use a HomePod or AirPlay speaker instead

If headphones will not connect and you only need sound from something other than the TV, Apple documents HomePod and AirPlay-enabled speakers as an alternative.

The speakers must be on the same network as the Apple TV 4K.

OptionStepsHow long it lasts
Temporary outputPress and hold the TV button, open Control Center, select Audio Controls and choose the speakersResets to the default output after the Apple TV goes to sleep
Default outputSettings > Video and Audio > Audio Output, then choose the speakersStays until you change it

With other AirPlay speakers, system alerts and game sounds do not play through them, and they play through the default output or the TV speakers instead.

Apple’s Home accessories website lists the compatible AirPlay speakers.

If the remote is the problem

You need the remote’s TV button for Control Center, so a dead remote blocks the AirPods route.

See our guide to a Siri Remote that is not working.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *