How To Replace The Battery In An AirTag (2026)
An AirTag runs on a standard coin battery that you can swap yourself, and your iPhone warns you when it runs low.
This guide follows Apple’s official page on replacing the battery in your AirTag, with the safety warnings Apple includes.
The whole job takes a minute and needs no tools.
Quick answer: the AirTag battery at a glance
| Question | Answer |
|---|---|
| Battery type | CR2032 3V lithium coin battery |
| Where to buy one | Most electronic and drug stores |
| Which way up | Positive side facing up |
| How you know it is connected | You hear a sound when the new battery goes in |
| How the cover comes off | Press down and turn counterclockwise until it stops |
| How the low battery warning arrives | A notification on your iPhone |
| Where to check manually | Find My, Items tab, then the AirTag |
How you find out the battery is low
Apple says a notification appears on your iPhone when the AirTag battery is low.
You can also check by hand at any time.
- Open the Find My app.
- Tap the Items tab.
- Tap your AirTag.
If the charge is low, the words Low Battery appear under the AirTag’s name.
Apple does not give a battery-life figure for the AirTag (2nd generation) on its tech specs page, so there is no fixed schedule to follow.
What you need to replace the battery
The AirTag takes a CR2032 lithium 3V coin battery, and Apple says most electronic and drug stores sell them.
The AirTag (2nd generation) uses the same user-replaceable CR2032 coin cell, and Apple’s tech specs page says one comes installed in the box.
You do not need any tool, because the stainless steel cover turns by hand.
How to replace the AirTag battery
- Press down on the polished stainless steel battery cover and turn it counterclockwise until it stops.
- Remove the cover and the old battery.
- Insert a new CR2032 battery with the positive side facing up.
- Listen for the sound that tells you the battery is connected.
- Line up the three tabs on the cover with the three slots on the AirTag.
- Turn the cover clockwise until it stops.
Choose a bitter-coated battery if children are around
To discourage accidental swallowing, Apple suggests a bitterant-coated CR2032, such as the Duracell 2032 Lithium Coin Battery with Bitter Coating.
Choose packaging that says it is compatible with Apple AirTag.
Apple also warns that some bitterant-coated CR2032 batteries might not work with AirTag or other battery-powered products.
If a new battery gives no sound, try a different brand before you assume the tag is faulty.
Battery safety warnings from Apple
| Warning | What Apple says |
|---|---|
| Choking hazard | The AirTag, cover and battery can be a choking hazard or cause other injury to small children |
| Ingestion hazard | Button cell and coin batteries can cause death or serious injury if swallowed |
| Speed of harm | A swallowed coin battery can cause internal chemical burns in as little as 2 hours |
| Storage | Keep new and used batteries out of reach of children |
| If swallowed | Seek immediate medical attention if a battery is suspected to be swallowed or inserted into any part of the body |
Check the AirTag after the swap
A sound when the battery goes in is the first sign that the tag is powered.
Open Find My, tap Items, and confirm the AirTag still shows in your list.
Tap the AirTag, tap the More button, and choose Play to hear its built-in speaker if you are close.
Once the Low Battery label is gone from under its name, the swap has worked.
If the AirTag does not respond after a new battery
Apple’s battery page does not cover this case, so use the troubleshooting on its setup page instead.
That page tells you to confirm Bluetooth, Location Services and Find My access are on, restart your iPhone, and replace the AirTag’s battery if needed.
It then says to reset the AirTag if it still will not connect.
Our guides explain how to reset an AirTag and how to fix an AirTag that will not connect.
Original AirTag and AirTag (2nd generation)
| Detail | Original AirTag | AirTag (2nd generation) |
|---|---|---|
| Battery | CR2032 coin battery | User-replaceable CR2032 coin cell |
| Cover | Stainless steel, press and turn | Stainless steel, press and turn |
| iPhone software | iOS 14.5 or later | iOS 26.2.1 or later for setup |
| Water and dust resistance | Not covered on the pages used here | IP67, up to 1 m for up to 30 minutes |
Apple notes the IP67 rating may decline with normal wear.
Where the AirTag lives in Find My
You can locate an AirTag only in the Find My app on an iPhone, iPad, Mac or Apple Watch.
Apple says the iCloud.com/find website does not support AirTags.
If the tag does not appear in Find My, update to the latest iOS, iPadOS, macOS or watchOS.
Our Find My location not showing guide helps when an item looks offline.
What Find My shows when the tag cannot report
If the item cannot report its current location, Find My can show its last known location for up to seven days.
After more than seven days without a report through the Find My network, it shows No location found.
Replacing the battery when the Low Battery label first shows keeps the tag reporting to Find My.
What to do with the old battery
Apple says to keep new and used batteries out of reach of children.
Put the old cell somewhere safe straight away rather than leaving it on a table beside the tag.
Close the AirTag cover fully before you put the tag back on your keys or bag, so the three tabs sit in their slots and the cover turns until it stops.
Keep the cover and battery together until the swap is finished, because the cover is also a small part.
AirTag (2nd generation) size and operating range
The tag is small, so the cover and battery are easy to drop, and Apple’s tech specs give the exact dimensions.
| Spec | Apple figure |
|---|---|
| Diameter | 31.9 mm (1.26 in) |
| Height | 8.0 mm (0.31 in) |
| Weight | 11.8 g (0.42 oz) |
| Operating temperature | -20 to 60 degrees C (-4 to 140 degrees F) |
Precision Finding after the battery swap
If the Find button is missing once the tag is back on, check the phone rather than the battery.
Apple says your iPhone must support Ultra Wideband, run the latest iOS, and have Location Services turned on with a Find My location access option chosen.
For the most accurate result, turn on Precise Location for Find My.