How To Reset An AirTag And Set It Up Again (2026)

An AirTag that was set up by someone else, or that refuses to pair, usually needs a reset before it will work with your iPhone.

The reset is done with the battery, and Apple’s steps differ slightly between the original AirTag and the AirTag (2nd generation).

This guide follows Apple’s official page on how to reset your AirTag.

Quick answer: how the AirTag reset works

DetailOriginal AirTagAirTag (2nd generation)
Tool neededThe AirTag’s own batteryThe AirTag’s own battery
First stepRemove the cover and battery, then put the battery back inRemove the cover and battery, then put the battery back in
Press the batteryAbout 2 seconds, until you hear a soundAbout 2 seconds until a sound, then 2 seconds more
Between soundsRemove the battery and reinsert itRemove the battery, wait 12 seconds, reinsert it, then remove it again
Sounds neededFive in totalFive in total
Success signalThe fifth sound is different from the first fourThe fifth sound is different from the first four
If the fifth sound is not differentKeep repeatingKeep repeating, and press the battery for 12 seconds if needed

When you need to reset an AirTag

Apple says a reset is needed when the previous user removed the AirTag from their Apple Account while out of Bluetooth range.

If they have not removed it at all, they have to do that first, because a reset alone does not break the link to their account.

A reset is also the last step Apple lists for an AirTag that will not connect during setup, which our AirTag setup guide covers.

Remove the AirTag from the old Apple Account first

If you still own the AirTag and want to hand it on, remove it properly before you reset anything.

Apple’s page for items connected to another Apple Account gives these steps for an iPhone or iPad.

  1. Open Find My and tap Items.
  2. Tap the AirTag, then tap the Details button.
  3. Tap Remove Item, then confirm.

Apple adds that an AirTag cannot be removed from an Apple Account on a Mac, so use an iPhone or iPad.

Removing the item also clears Find My Lock, which is the link that stops anyone else pairing it.

Before you start

The reset needs only the AirTag, and its battery does all the work.

The battery cover turns with a press and a twist, so find a flat surface and keep small parts away from children.

Apple warns that the AirTag, its cover and the battery can be a choking hazard for small children.

Reset an original AirTag

  1. Press down on the stainless steel battery cover and turn it counterclockwise until it stops.
  2. Remove the cover and the battery.
  3. Put the battery back in.
  4. Press down on the battery for about 2 seconds, until you hear a sound.
  5. After the sound finishes, remove the battery and reinsert it, then press down again until you hear a sound.
  6. Repeat that step until you have heard five sounds in total.
  7. Line up the three tabs on the cover with the three slots on the AirTag, press down, and turn the cover clockwise until it stops.

The sound in step 4 tells you the battery is connected.

Reset an AirTag (2nd generation)

  1. Press down on the stainless steel battery cover and turn it counterclockwise until it stops.
  2. Remove the cover and the battery.
  3. Put the battery back in.
  4. Press down on the battery for about 2 seconds until you hear a sound, and keep pressing for 2 more seconds.
  5. After the sound finishes, remove the battery and wait 12 seconds.
  6. Put the battery back in, then take it out again, and repeat that four more times for five sounds in total.
  7. Line up the three cover tabs with the three slots, press down, and turn the cover clockwise until it stops.

Apple’s page includes a video of this second-generation process.

How to tell the reset worked

Every press should produce a sound.

The fifth sound should be different from the first four.

If the fifth one sounds the same, Apple says to keep repeating the process.

On the second-generation AirTag you may need to hold the battery down for 12 seconds to get that fifth sound.

Set the AirTag up again after the reset

Once the cover is back on, Apple says the AirTag is ready to pair.

The pairing steps come from Apple’s page on adding an AirTag to Find My.

  1. Bring the AirTag near your iPhone or iPad and tap Connect.
  2. Choose a category such as Keys, or pick Custom Name and an emoji.
  3. Tap Agree or Continue to link it to your Apple Account.
  4. Tap Done.

The software you need depends on which tag you own.

ItemRequirement for pairing
Original AirTagiOS or iPadOS 14.5 or later
AirTag (2nd generation)iOS or iPadOS 26.2.1 or later
BluetoothOn, in Settings
Location ServicesOn, under Privacy & Security

What a reset cannot do

A reset does not unlock an AirTag that another person still has linked to their Apple Account.

Apple states that if the previous owner cannot remove it, you can reset it, but you still cannot pair it with your own account.

The reset does stop the AirTag from sharing its location with the previous owner.

Apple also says it cannot remove Find My Lock for you, so only the previous owner can clear it.

Reset versus removing the AirTag

ActionWhat it doesWhere you do it
Remove ItemClears the link and Find My LockFind My on an iPhone or iPad
ResetPrepares the tag to pair again and stops it sharing location with the old ownerOn the AirTag, using its battery

If the AirTag still will not pair

Check that Bluetooth and Location Services are on and that your iPhone runs a supported iOS version.

Keep only one AirTag near the phone while you connect.

Replace the battery if the tag has stopped making sounds, using our guide to replacing the AirTag battery.

Before you give an AirTag to someone else

Removing the AirTag from your own Apple Account is the step that matters most when you hand it on.

Do it while you are still near the tag, because Apple notes that the process can go faster when the item is connected by Bluetooth and close to the iPhone or iPad you use.

Once it is removed, the new owner can reset it if needed and then pair it with their own account.

Removing a tag frees a Find My slot

Find My allows 32 items in total, including shared items and accessories.

Apple says that once you reach that limit you cannot add another item until you remove an existing one.

That makes removing an old AirTag from your list useful even when you are not giving it away.

Official Apple sources

Leave a Reply

Your email address will not be published. Required fields are marked *