How To Fix A Corrupt Or Damaged Word Document (2026)

If Word will not open a document, or the file opens with scrambled layout and error messages, the document may be damaged.

Word has several built-in ways to pull the content back out, and most of them take less than a minute.

The steps below follow Microsoft’s troubleshooting article for damaged Word documents, in the order Microsoft recommends.

Quick answer: what to try first

Your situationFirst thing to try
The file will not open at allFile > Open, select the file, click the arrow next to Open, choose Open and Repair
Word opens, but the file looks wrong or freezesCopy the content into a new blank document
Pages seem to be missing after a certain pointDelete the object right after the last visible page (Web Layout or Draft view)
Nothing else works and you only need the wordsOpen with Recover Text from Any File, or extract the text in Notepad

Before you start, make a copy of the damaged file so the original stays untouched.

Signs that a document is damaged

Microsoft lists these as typical signs of a damaged document.

  • Pages are repeatedly renumbered, or page breaks are repeatedly redone
  • The layout or formatting is wrong, or characters are unreadable
  • Error messages appear while Word processes the file
  • The computer stops responding when the file opens

Microsoft says other unexpected behavior that normal program operation does not explain can also point to a damaged file.

Check whether the document or Word is the problem

Open a few other Word documents first.

If they open correctly, the problem is probably in the one file.

If other Office programs also misbehave, Microsoft says the cause may be another application or Windows itself, so repair Office instead.

For that case, see how to repair Microsoft 365 apps on Windows 11.

Method 1: Use Open and Repair

This is the quickest fix and works whether the file opens normally or not.

  1. Open Word and select File > Open.
  2. Select Browse and go to the folder that has the file.
  3. Click the document once to highlight it.
  4. Click the arrow on the Open button and select Open and Repair.

Microsoft says not to use the Recent list for this, because files opened from there do not go through the Open dialog box.

Method 2: Open in Draft view without updating links

Use this when the file will not open at all, since it removes two common triggers: heavy formatting and automatic links.

  1. Start Word and, on the View tab, select Draft in the Views group.
  2. Select File > Options > Advanced.
  3. Under Show document content, select Use draft font in Draft and Outline views and Show picture placeholders.
  4. Under General, clear Update automatic links at open, then select OK and close Word.
  5. Start Word again, select File > Open, pick the damaged document and select Open.

If it opens, close it, reopen it and run Open and Repair as described above.

Method 3: Insert the file into a new document

  1. Select File > New > Blank document > Create.
  2. On the Insert tab, select Insert Object > Text From File.
  3. In the Insert File dialog, select the damaged document and select Insert.

Microsoft notes that you may need to reapply formatting to the last section.

Method 4: Recover Text from Any File

  1. Select File > Open.
  2. In the Files of type box, select Recover Text from Any File (*.*).
  3. Select the damaged document and select Open.

This converter keeps text but loses other items.

KeptLost
Body textFormatting
Field text, headers, footers, footnotes and endnotes (as plain text)Graphics, fields and drawing objects

Some binary text may remain at the start and end of the document, and Microsoft says to delete it before you save the file as a Word document.

Microsoft offers a longer workaround that pulls the content in through a link.

  1. Create a new blank document, type “This is a test.” and save it as “Rescue link”.
  2. Select that text and copy it.
  3. Create another blank document, select the arrow under Paste and choose Paste Special.
  4. Select Paste link, choose Formatted Text (RTF) and select OK.
  5. Right-click the linked text, point to Linked Document Object and select Links.
  6. Select the linked file name, select Change Source, choose the damaged document and select Open, then select OK.
  7. Right-click the text again, go to Linked Document Object > Links, select Break Link and confirm with Yes.

Any recoverable text should appear once the source points at the damaged file.

If the damaged document does open

Microsoft gives a second set of methods for files that open but behave badly, and these are tried in order.

OrderMethodWhere to start
1Copy everything except the last paragraph mark into a new documentCtrl+End, then Ctrl+Shift+Home, copy, then paste in a blank document
2Change the templateFile > Options > Add-Ins, Manage Templates > Go
3Start Word with default settingsRun winword.exe /a, then open the file
4Change the printer driverAdd a local printer using the Microsoft XPS Document Writer
5Open and RepairFile > Open, arrow next to Open
6Convert to RTF and backFile > Save as > Other Formats > Rich Text Format
7Copy undamaged parts into a new documentView > Switch Windows to move between files

If the document has section breaks, Microsoft says to copy only the text between them and to switch to Draft view first so the damage does not carry over.

Rename Normal.dotm or start with /a

A damaged template can make a good document act damaged.

To test this, exit Word, search the Start menu for normal.dotm, and rename it to Oldword.old.

Microsoft says the file is usually in %userprofile%\appdata\roaming\microsoft\templates.

Start Word again and open the document, because Word builds a fresh Normal.dotm on launch.

The quicker test is to exit Word, press Start, search for Run and enter winword.exe /a, which loads no add-ins and ignores Normal.dotm.

Convert the file to RTF and back

  1. Open the damaged document and select File > Save as > Other Formats.
  2. In Save as file type, select Rich Text Format (*.rtf) and select Save, then close the file.
  3. Open the RTF file, select File > Save as, choose Word Document and give it a new name.

If that fails, Microsoft says to repeat the process with Webpage (.htm; .html), then any other word processing format.

Plain Text (.txt) is the last resort, because formatting, macros and graphics are lost.

When pages are missing from the end

If the document seems to stop partway through, one damaged object may be hiding the rest.

  1. Scroll to the last page that shows and note what is on it.
  2. Select View > Web Layout or Draft.
  3. Scroll to that spot and delete the next paragraph, table or object.
  4. Switch back to Print Layout and check whether the missing pages appeared.
  5. Repeat until they do, then save.

Last resort: extract the text with Notepad

This loses all formatting, but Microsoft says the content is usually recoverable.

  1. Right-click the damaged document in File Explorer and select Open with > Notepad.
  2. Delete most of the extra code around the readable text.
  3. Select File > Save As and use a new name so the original is not overwritten.
  4. Open the new file in Word and reapply formatting.

How to avoid damaged documents

Microsoft names unplugging a USB drive while a file is open as a common cause of corruption.

Use Safely Remove Hardware from the taskbar before you unplug it.

Microsoft also recommends storing files on OneDrive and turning on AutoSave if you have a Microsoft 365 subscription.

If the file never got saved in the first place, see how to recover an unsaved Word document.

If the file opens but you cannot type in it, see how to enable editing in Protected View.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *