|

How To Fix VLC Video Or Sound Problems On Windows (2026)

If VLC shows a black or garbled picture, plays with crackling sound, or has no sound at all, VideoLAN’s own documentation has a set of settings changes for Windows.

Most of them live in Tools > Preferences, and VLC needs to be restarted after you save a change.

This guide follows the VLC user documentation and VideoLAN’s wiki, and it says plainly where those pages have no dedicated entry.

Quick answer: which setting to try

ProblemSetting VideoLAN points to
Black, white or garbled videoTools > Preferences > Video: turn off Accelerated video output / Overlay video output, or choose another Output module
Black screen in the player windowVideo: untick Embedded video selection
Image errors on H.264 or VC-1 videoInput & Codecs: tick or untick Use GPU accelerated decoding
Crackles, pops or hissAudio > Output module: try DirectX or Win32 waveOut
Sound plays on the wrong deviceChoose the Output device for your audio output module
VLC misbehaves or will not startReset Preferences, or delete the vlc folder in %appdata%

What the VLC documentation does and does not cover

VideoLAN’s Windows FAQ has no dedicated section titled no sound or no picture.

The fixes below are its closest entries for black video, garbled video, audio problems and crashes.

Menu names can differ slightly between VLC versions, so follow the names you see on your own screen.

Open the VLC preferences

  1. Open VLC and select Tools, then Preferences.
  2. Choose the section you need, such as Audio, Video or Input / Codecs.
  3. Switch to the advanced view when a step needs it, which the FAQ calls Show settings: All and the 3.0 documentation describes as clicking All at the bottom left.
  4. Click Save when you finish, then restart VLC.

The documentation says the simple view shows the most commonly used settings and the advanced view exposes settings that need more background knowledge.

Fix black, white or garbled video

VideoLAN says black, white or garbled video is usually a display driver issue.

  1. Go to Tools > Preferences > Video.
  2. Turn off Accelerated video output / Overlay video output.
  3. Click Save and restart VLC.
  4. If that fails, return to Video and choose another module from the Output dropdown, the video output module.
  5. Click Save and restart VLC again.

The FAQ also says to set the video output to GDI if VLC crashes or shows garbled images inside VMware or VirtualBox.

Fix a black screen in the player window

VideoLAN lists a separate setting for a black screen from the embedded window.

  1. Go to Tools > Preferences > Video with Show Settings set to All.
  2. Untick Embedded video selection.
  3. Save and restart VLC.

This separates the playback controls from the video window.

Try the GPU decoding setting

For H.264 / MPEG-4 AVC or VC-1 video with image errors, VideoLAN says to flip one checkbox.

  1. Go to Tools > Preferences > Input & Codecs.
  2. Tick or untick Use GPU accelerated decoding, whichever is the opposite of what it is now.
  3. Save, restart VLC and play the file again.

For slow or laggy H.264 playback, the FAQ lists setting Skip H.264 in-loop deblocking filter to All under Input / Codecs.

It also lists lowering Threads to 4, 2 or 1 under Input / Codecs > Video codecs > FFmpeg with all settings shown.

Fix choppy or dark video

SymptomWhat VideoLAN suggests
Choppy videoUpgrade your video card driver, close other running applications, and disable framedropping in VLC’s Video preferences
Video is too darkFor one video, enable Extended GUI in the Settings menu and raise Gamma on the Video tab; otherwise turn off hardware video overlay in your video card settings, and reinstall video drivers if that fails
Image brightness or contrastTools > Effects and Filters > Video Effects > Essential, then tick Image adjust

VideoLAN says framedropping allows VLC to skip decoding some pictures when the CPU is overloaded.

Fix crackling, popping or hissing sound

  1. Go to Tools > Preferences and set Show Settings to All.
  2. Select Audio > Output module.
  3. Try DirectX or Win32 waveOut.
  4. Save and restart VLC.

The FAQ notes that VLC does not support ASIO, and that Win32 waveOut works better with SPDIF passthrough of AC3 or DTS.

Choose the right audio output device

VideoLAN gives separate paths depending on the output module you use.

Output moduleWhere to choose the device
DirectXTools > Preferences (All) > Audio > Output modules > DirectX > Output device
WaveOutTools > Preferences (All) > Audio > Output modules > WaveOut > Select Audio Device

Save the settings before restarting VLC, or the changes may not be kept.

VideoLAN’s wiki page on this was last edited in 2016, so menu names may differ in newer VLC versions.

Our guide to changing the default sound output in Windows 11 covers the Windows side of the same choice.

Fix missing dialogue and speaker layout

For no dialogue in 5.1 audio, VideoLAN says to set the correct speaker layout in Windows audio settings or your sound card control panel.

In VLC, check Audio > Audio Device for matching speaker settings during playback.

To force a layout such as always stereo, use Audio > Output modules > DirectX > Speaker configuration with all settings shown.

If your PC sound fails in every app, see our guide to HDMI with no sound on Windows 11.

Check the audio track and sync

VLC lets you switch the audio track off, so confirm it is not disabled.

  • Go to Audio > Audio Track and make sure Disable is not selected.
  • The Audio menu commands are only enabled while an audio file is playing.
  • Press j or k during playback to change audio delay in 50 ms steps.
  • Use j if the audio leads the picture and k if it lags.

For audio and video out of sync, VideoLAN also suggests trying a different audio output plugin.

Reset VLC preferences

VideoLAN says corrupted settings files usually cause a crash on startup, and a reset typically fixes it.

SituationHow to reset
VLC startsTools > Preferences > Reset Preferences, then Save and restart
VLC will not startOpen %appdata% from Start > Run and delete the vlc folder
Start menu routeStart menu > VideoLan > Reset VLC media preferences

The 3.0 documentation says Reset Preferences deletes VLC’s preferences and cache, which can fix problems from incorrect settings or a broken plugin cache.

If only one file will not play

VideoLAN says to check its features page to confirm VLC supports the format.

It says that if the format is not supported, there is no workaround yet.

Videos from an iPhone have their own cause, which our iPhone video on Windows guide explains.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *