How To Fix A Tesla Supercharger Not Charging Or Stopping (2026)
If your Tesla will not start charging at a Supercharger, or stops partway through, the charge port light and the touchscreen alert usually point to the cause.
The cause is often the connector, the payment setup or the stall, and trying another stall at the same site is a quick test.
This guide follows Tesla’s Supercharging support page and the Tesla owner’s manuals, and it does not go beyond what those pages say.
Quick answer: what to try first
| Step | What Tesla says |
|---|---|
| 1. Check the light | After plugging in, confirm the charge port light blinks green before you walk away |
| 2. Read the alert | Check the touchscreen for the alert that describes the fault |
| 3. Reseat the connector | Fully reinsert the cable and check the port and connector for debris, moisture or objects |
| 4. Try another stall | If the car charges elsewhere, the issue was likely the equipment |
| 5. Check payment | Make sure a Supercharging payment method is set in the Tesla app |
What the charge port light means
The Model 3 manual lists what each charge port light color means.
| Light | Meaning |
|---|---|
| White or light blue | Port door is open and ready to charge, or the latch is unlocked and the connector can be removed |
| Blue | Charger connected but the car is not charging, such as during scheduled charging |
| Blinking blue | Communicating with the charger but not yet charging |
| Blinking green | Charging, and the blinking slows as the battery nears full |
| Solid green | Charging is complete |
| Solid amber | Connector is not fully inserted, so realign it and push it in fully |
| Blinking amber | Charging at reduced current, which applies to AC charging only |
| Red | A fault was detected and charging stopped, so check the touchscreen |
The car will not start charging
- Open the charge port from the touchscreen or the Tesla app, or press the bottom of the port door while the car is unlocked.
- Plug the connector in fully.
- Look for the port light to flash green.
- If it does not start after a few seconds, check the touchscreen for an alert.
The manual says the connector may not be fully inserted, or something else may be preventing charging.
Charge latch not engaged
The Model Y manual lists an alert called Charge port latch not engaged, code CP_a054.
It says the port light pulses amber during AC charging, or is solid amber when you try to Supercharge.
In that state AC charging is limited to 16A and Supercharging is unavailable.
The fix is to fully reinsert the cable and check the port and connector for debris, moisture or foreign objects.
If it continues, make sure the trunk manual release cable has not been pulled and its handle is not obstructed.
Alerts for charging that stops
| Alert code | What the manual says to do |
|---|---|
| CP_a056 Charging stopped, cable disconnected | Stop charging before unplugging, using the touchscreen, the app, the station or the handle button, then close the charge port, press the brake pedal and retry |
| CP_a058 Repeated retries | The car retries automatically, and you can disconnect and reconnect the cable to retry sooner |
| CP_a146, CP_a139, CP_a141 Station error | Check the station’s status lights or display, then try a different station |
| CP_a053 Station not powered | Try a different station |
| CP_a066 Station not ready or needs authorization | Complete any card, app or payment step the station requires |
| CP_a151 Charge port error, service required | The manual notes it is OK to Supercharge, though AC charging may be limited |
Try a different stall
The manual says that if the car charges at another station, the problem was likely the equipment.
Tesla’s Supercharging page says that for a broken or inoperative Supercharger, you should use another Supercharger at the same location.
The manual also advises leaving space between your car and others, since neighboring stalls may share power.
Check payment and ownership
Tesla lists the basics for when you cannot Supercharge.
- Download the Tesla app.
- Add a payment method.
- Designate it as the Supercharging payment method.
- Confirm a proper connection between the Supercharger and your car.
If you bought the car from a third party, you must be listed as the owner, and you can transfer ownership in the app.
Tesla says unpaid balances or an incorrect payment method may prevent you from Supercharging, so see how to pay for Tesla Supercharging in the app.
Frozen latch in cold weather
For frozen latch alerts CP_a078, CP_a079 and CP_a164, the Model Y manual says to use Defrost Car in the Tesla app for about 30 to 45 minutes.
The Model 3 manual says that if the cable is frozen in the port, you can touch Controls > Service > Inlet Heater, which heats the port for up to two hours.
Preconditioning can also thaw a frozen latch, and setting a schedule time helps prevent freezing.
For releasing a stuck plug, see how to fix a stuck Tesla charge cable.
Charging is slower than expected
Tesla’s Supercharging page says the charging rate depends on the battery charge level, battery temperature, current site use and extreme climate conditions.
The manual notes that a lower state of charge typically results in faster charging.
It also says that navigating to a fast charger, including a Supercharger, allows the high-voltage battery to precondition.
At high-use sites the charge limit may be set to 80%, which you can raise on the touchscreen or in the app after plugging in.
After a power outage
The Model 3 manual says a power outage can cause a fault and that charging resumes automatically when power returns.
If the light turns red, check the touchscreen for the fault description.
Using a third-party adapter
The Model Y manual lists an arc flash hazard alert, CP_a143, for use with a third-party CCS adapter.
It says to stop charging, confirm no active session at the station, make sure no green or blue LED is flashing at the port, then unplug the adapter from the port and then from the charge handle.
It says to use different equipment afterward.
Report a problem to Tesla
- Open the Tesla app, version 4.39.0 or later.
- Select the Supercharger location.
- Tap Report an Issue.
- Select a category and include a photo.
Tesla says it reviews each report and decides next steps.
For fees that can apply once charging ends, read how to avoid Tesla Supercharger idle fees.
Sources: Tesla Support: Supercharging, Tesla Model 3 Owner’s Manual and Tesla Model Y Owner’s Manual: Troubleshooting Alerts.