How To Fix A Stuck Or Missing Tesla Software Update (2026)
A Tesla software update that never shows up, never finishes downloading or will not install is nearly always a Wi-Fi, parking or setting issue.
This guide uses Tesla’s software update support page and the owner’s manuals, so the steps cover current Tesla models, although exact screens vary slightly by model and software version.
Never try to drive or troubleshoot the car while an installation is running.
Quick answer
| What you see | What to do |
|---|---|
| No update appears | Updates roll out in stages, so check Controls > Software and keep the car on Wi-Fi |
| Yellow download icon | The car is not on Wi-Fi, so connect it |
| Download keeps stopping | Use a Wi-Fi signal of at least three bars and avoid driving during the download |
| Install will not start | Put the car in Park and turn off Keep Climate On, Pet Mode and Camp Mode |
| Stuck for more than three hours | Reboot the touchscreen, then schedule service if it still fails |
Why no update is showing
Tesla releases updates gradually, so vehicles do not all receive the same update at the same time.
Tesla does not send an update to a specific car on request.
When nothing is pending, Controls > Software shows the message Your car software is up to date.
The Tesla app also shows a Software Update section on its main page when an update is ready.
What the update icons mean
| Icon | Meaning |
|---|---|
| Green arrow | The download is in progress |
| Yellow download icon | An update is available but the car is not on Wi-Fi |
| Yellow clock icon | The update is downloaded and ready to install |
Fix the Wi-Fi connection
Most downloads need Wi-Fi, although Tesla sometimes sends updates over cellular.
Tesla says a download needs a stable signal of at least three bars.
- Park the car closer to the router, or wait for a stronger signal.
- Keep Wi-Fi connected through the download and install.
- Avoid driving during a download, because losing Wi-Fi can interrupt it.
Choose the update preference
Go to Controls > Software and pick your update preference.
| Preference | What you get |
|---|---|
| Advanced | More releases, sooner |
| Standard | Fewer releases, after others have installed them |
Choosing Advanced does not enroll the car in Tesla’s early access program.
Tesla says Advanced plus consistent Wi-Fi is the quickest route to new updates.
Meet the install requirements
- Shift the car into Park, because you cannot drive while an update installs.
- Turn off Keep Climate On, Pet Mode and Camp Mode, which block installation.
- Expect about 30 minutes for some updates and longer for others.
- If the car is plugged in, charging stops during the install and resumes afterward.
Tesla’s pages do not state a minimum battery level for installing an update manually, so do not assume a low charge is the cause.
During installation some safety systems and door or window functions may be limited, so do not use the car.
Start or schedule the update
- Touch the yellow clock icon at the top of the touchscreen, or go to Controls > Software.
- Choose Install Now or Set For This Time.
- To change the time, touch the clock icon again before the update starts.
If you are driving at the scheduled time, the update is canceled and you must reschedule it.
Install updates overnight automatically
Turn on Controls > Software > Automatically Install Updates.
The car installs at 2 a.m. only if it is parked at your Home location with more than 10% energy.
If no Home location is set, the touchscreen prompts you to set one, and the Tesla app notifies you when an install is scheduled.
What to do when the update is stuck
- Confirm the car is on Wi-Fi during the download or install.
- Check the Tesla app for a Software Update Complete notification.
- If it has not appeared and more than three hours have passed, reboot the touchscreen.
- If the update still makes no progress or fails, schedule a service appointment.
How to reboot the touchscreen
Park the car first, since Tesla says to restart the touchscreen only while stopped and in Park.
Tesla’s update page says to hold both scroll buttons on the steering wheel for about 20 seconds until the Tesla T appears.
The service manual says to hold them until the touchscreen turns black, then wait about 30 seconds.
During the restart, the status display, safety warnings and backup camera are not visible.
What happens if you skip updates
The update screen stays until you install, so Tesla advises installing as soon as possible.
Not installing can make some features inaccessible or make digital media devices incompatible.
Tesla says damage from not installing an update is not covered by the warranty.
You cannot go back, because reverting to an earlier software version is not possible.
Read the release notes
After an update finishes, the touchscreen shows the release notes.
To read them again, go to Controls > Software > Release Notes.
Tesla strongly recommends reading them, because they can include safety information.
Fix problems that appear after an update
Tesla’s update page lists two follow-up problems owners commonly check after a new version installs.
| Problem | What Tesla suggests |
|---|---|
| Bluetooth media will not play | Remove the device from the car’s Bluetooth settings and the car from the device’s settings, then pair them again, and reboot the touchscreen if needed |
| Keyless entry or phone key trouble | Confirm your settings, keep the Tesla app running in the background, toggle Bluetooth, or set the phone up as the key again |
If you remove a phone key, keep a working key card nearby, as explained in our Tesla phone key guide.
Tesla Service may also update or reinstall software during maintenance or repairs.
When to contact Tesla
Tesla says to schedule a service appointment if the update stays stuck, makes no progress or fails after a touchscreen reboot.
If other screens or the app also misbehave, see our Tesla app connection guide and our guide to powering down your Tesla.